Maxxus LifePlate 4.0 manual

Maxxus LifePlate 4.0
8.7 · 1
PDF manual
 · 20 pages
English
manualMaxxus LifePlate 4.0
0
4.
ENG

User Guide

© 2017 by MAXXUS Group GmbH & Co. KG
All rights reserved
This publication may not be reproduced, stored in retrieval system, or transmitted in whole or in part, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written permission of Maxxus Group GmbH & Co. KG.
Duplication, including electronic form, is only permitted with prior written permission directly from MAXXUS Group GmbH & Co. KG.
Errors, colour and technical modication are subject to change

View the manual for the Maxxus LifePlate 4.0 here, for free. This manual comes under the category vibration plates and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Maxxus LifePlate 4.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Maxxus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandMaxxus
ModelLifePlate 4.0
Productvibration plate
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maxxus LifePlate 4.0 below.

How can I troubleshoot if the LCD display of the Maxxus LifePlate 4.0 vibration plate is not showing any information?

To troubleshoot if the LCD display of the Maxxus LifePlate 4.0 vibration plate is not showing any information, you can follow these steps: 1. Check the power connection: Ensure that the vibration plate is properly connected to a power source. Make sure the power cable is securely plugged into the electrical socket and the device. 2. Turn on the vibration plate: Switch on the vibration plate using the main switch. The device must be switched on at the main switch before operating the display. 3. Check the display settings: Press the "On/Off Mode" key on the display to turn on the cockpit. Verify if the display is showing any information such as time, training level, mode, or program. 4. Restart the vibration plate: If the display is still not showing any information, try turning off the vibration plate and then turning it back on. This can help reset the display and resolve any temporary issues. 5. Contact customer support: If the display continues to show no information after following the above steps, it is recommended to contact the MAXXUS Service Department for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting the LCD display of the Maxxus LifePlate 4.0 vibration plate.

What should I do if I see an error message related to the computer/controller connection on the Maxxus LifePlate 4.0 vibration plate?

If you see an error message related to the computer/controller connection on the Maxxus LifePlate 4.0 vibration plate, you can follow these steps to troubleshoot the issue: 1. Switch off the vibration plate: Turn off the vibration plate using the main switch. 2. Check the connection: Ensure that the computer/controller connection is secure. Make sure that all cables and connectors are properly plugged in. 3. Restart the vibration plate: Switch on the vibration plate again and see if the error message persists. Sometimes, a simple restart can resolve connection issues. 4. Contact customer support: If the error message continues to appear after checking the connection and restarting the vibration plate, it is recommended to contact the MAXXUS Service Department for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Remember, these steps are general guidelines for troubleshooting the computer/controller connection error on the Maxxus LifePlate 4.0 vibration plate. For detailed instructions and safety precautions, refer to the user manual or contact customer support.

How should I dispose of the Maxxus LifePlate 4.0 vibration plate and its batteries/rechargeable batteries properly?

To dispose of the Maxxus LifePlate 4.0 vibration plate and its batteries/rechargeable batteries properly, follow these steps: 1. Disposal of the vibration plate: Do not dispose of the training device in the normal household rubbish. Instead, take it to a communal waste disposal facility or a registered waste disposal company. Observe the current regulations that apply in your area. If you are unsure, seek advice from your local government office or county council to find out where you can dispose of the device properly and in an environmentally sound manner. 2. Disposal of batteries/rechargeable batteries: Never dispose of batteries or rechargeable batteries in the household rubbish. These items can contain toxic substances. It is your legal obligation to dispose of them at an appropriate collection point. You can take them to your local government office, county council, or retail outlet for proper disposal. If you are unsure, seek advice from your local government office or county council to find out where you can dispose of batteries properly and in an environmentally sound manner. Only dispose of batteries when they are empty. Remember to follow these disposal guidelines to ensure the proper and environmentally friendly disposal of the Maxxus LifePlate 4.0 vibration plate and its batteries/rechargeable batteries.

What steps should I follow to report a repair or damage claim for the Maxxus LifePlate 4.0 vibration plate?

To report a repair or damage claim for the Maxxus LifePlate 4.0 vibration plate, follow these steps: 1. Fill out the Repairs Contract/Damage Report form: Complete all the required fields in the form, including the device details (product name, serial number, date of purchase), personal details (company name, first name, address, email, etc.), and fault description (provide a precise description of the error). 2. Attach a copy of the proof of purchase: Make sure to include a copy of the purchase invoice or receipt with the form. This is necessary to claim your right to service works within the warranty period. 3. Send the form: Send the fully completed Repairs Contract/Damage Report form, along with the copy of the proof of purchase, to the MAXXUS Service Department. You can send it by post or fax, following the provided contact details. 4. Await response: Once the form is submitted, wait for a response from the MAXXUS Service Department. They will provide further instructions and guidance regarding the repair or damage claim. Remember to provide all the necessary information and documentation accurately to ensure a smooth process for reporting a repair or damage claim for the Maxxus LifePlate 4.0 vibration plate.

What should I do if the training surface of the Maxxus LifePlate 4.0 vibration plate is not functioning properly or has any issues?

To address issues with the training surface of the Maxxus LifePlate 4.0 vibration plate, follow these steps: 1. Check for any visible damage: Inspect the training surface for any visible signs of damage, such as cracks, tears, or loose parts. If you notice any damage, refrain from using the vibration plate and proceed to the next step. 2. Contact the MAXXUS Service Department: Reach out to the MAXXUS Service Department to report the issue with the training surface. Provide them with a detailed description of the problem and any relevant information, such as the date of purchase and the serial number of the device. 3. Follow the instructions provided: The MAXXUS Service Department will provide you with specific instructions on how to proceed. They may request additional information or ask you to send pictures of the training surface to assess the issue. 4. Follow the recommended course of action: Based on the assessment of the MAXXUS Service Department, they will guide you on the appropriate steps to resolve the training surface issue. This may involve arranging for repairs, replacement of parts, or other necessary actions. Remember to always prioritize safety and refrain from using the vibration plate if there are any issues with the training surface. Contacting the MAXXUS Service Department will ensure that the problem is addressed properly and in accordance with the manufacturer's guidelines.

Is the manual of the Maxxus LifePlate 4.0 available in English?

Yes, the manual of the Maxxus LifePlate 4.0 is available in English .

Is your question not listed? Ask your question here

No results