Maxi-Cosi Mico 12 manual

Maxi-Cosi Mico 12
7.1 · 1
PDF manual
 · 68 pages
English
manualMaxi-Cosi Mico 12
1
Baby Capsule
I
Maxi-Cosi
I
Images and designs
may vary.

Mico 12

Baby capsule

Suitable for newborn up to 12months approx..

View the manual for the Maxi-Cosi Mico 12 here, for free. This manual comes under the category baby products and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Maxi-Cosi Mico 12 or do you need help? Ask your question here

Need help?

Do you have a question about the Maxi-Cosi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Maxi-Cosi Mico 12 is a baby product designed for parents who prioritize their baby's safety and comfort while traveling. It is a car seat that can safely transport infants weighing up to 12 pounds. The car seat's base has a one-click LATCH system, making it easy to install, and the car seat can be removed from the base with one hand. The car seat comes with a five-point safety harness and a removable newborn headrest to accommodate your baby's growth. It also has a canopy that provides UPF 50+ sun protection to protect your baby's skin from harmful rays. The seat cover is machine washable and dryer safe, making it easy to clean and maintain. The Maxi-Cosi Mico 12 car seat is airline-approved, making it convenient for parents who travel frequently. It also comes in various colors, allowing parents to choose a color that suits their preferences. The car seat's design meets and exceeds federal safety standards, ensuring that your baby will be safe and comfortable while traveling. The Maxi-Cosi Mico 12 is a great option for parents who prioritize convenience, safety, and comfort when traveling with their babies.

General
BrandMaxi-Cosi
ModelMico 12
Productbaby product
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maxi-Cosi Mico 12 below.

How do I properly install the Maxi-Cosi Mico 12 baby capsule in my vehicle?

To properly install the Maxi-Cosi Mico 12 baby capsule in your vehicle, follow these steps: 1. Ensure that the headrest in your vehicle is in place when the baby capsule is not in use. 2. Position the baby capsule in the rear-facing position on the vehicle seat. 3. Use the seat belt to secure the baby capsule to the vehicle seat. Make sure to thread the seat belt through the designated belt path on the baby capsule. 4. Tighten the seat belt to ensure a secure fit. Check that the baby capsule is stable and does not move excessively. 5. If your vehicle is equipped with a top tether anchor point, attach the top tether strap to the anchor point. Follow the specific instructions in the manual for your vehicle to locate and attach the top tether strap correctly. 6. Double-check that the baby capsule is securely installed by giving it a firm shake. It should not move more than an inch in any direction. Remember to always consult the Maxi-Cosi Mico 12 baby capsule manual for detailed instructions and any specific requirements for your vehicle.

Why is the Maxi-Cosi Mico 12 baby capsule not securely attached to the base?

The Maxi-Cosi Mico 12 baby capsule may not be securely attached to the base due to the following reasons: 1. Improper engagement: Ensure that both sides of the base have the engagement indicators properly engaged. Check visually to confirm that the indicators are engaged on both sides of the base. 2. Incorrect angle: Check the angle of the capsule once it is in place on the base. The indicator on the side of the capsule should be level to the ground. If necessary, adjust the angle following the instructions provided on page 41 of the manual. 3. Tether loop: Pull the tether loop located in the pocket on the rear of the canopy and loop it around the capsule. Make sure there are no twists in the loop. Connect the tether loop to the Top-Tether adjuster strap. 4. Tighten the Top-Tether strap: Tighten the Top-Tether strap and remove any slack by pulling on the adjuster strap. Be careful not to overtighten the Top-Tether, and ensure that the base is not lifted off the vehicle seat. 5. Final installation check: The final installation should appear as shown in image L. If desired, the handle can be in either of the retracted positions during travel. Note: Avoid running the loop tether strap on the outside of the canopy cover. Do not use seatbelt extenders if the car seatbelt is not long enough. Always attach the top tether strap to the child restraint upper anchorage in your car, as mentioned in the owner's manual. Please refer to the Maxi-Cosi Mico 12 baby capsule manual for detailed instructions and illustrations specific to your product.

How do I adjust the canopy of the Maxi-Cosi Mico 12 baby capsule?

To adjust the canopy of the Maxi-Cosi Mico 12 baby capsule, follow these steps: 1. Canopy Adjustment: The canopy can be adjusted to different positions between its retracted and extended positions. Gently pull or push the visor to the desired position. 2. Black Out Mode: The canopy features a black out mode, which completely covers the baby when in the capsule. To activate the black out mode, pull the canopy forward from the start position until it softly locks into place. 3. Canopy Installation: If you need to install the canopy, follow these steps: a. Adjust the carry handle to the upright position by pushing the grey buttons at the base of the handle. b. Lift up the canopy connectors on both the left and right sides of the capsule. c. Slide the canopy ends into the canopy connectors on both sides of the capsule. d. Connect the canopy press stud onto the canopy connectors on both sides of the capsule. e. Open the canopy to locate the press stud at the back of the canopy. f. Connect the press stud at the back of the canopy to the trim cover. Please note that these instructions are specific to the Maxi-Cosi Mico 12 baby capsule. Refer to the manual for detailed illustrations and any additional information related to canopy adjustment and installation.

What should I do if the Maxi-Cosi Mico 12 baby capsule does not fit my newborn properly?

If the Maxi-Cosi Mico 12 baby capsule does not fit your newborn properly, follow these steps: 1. Check harness height: Ensure that the shoulder straps of the harness are in the slots nearest to the child's shoulders but not lower than the child's shoulders. This will help provide a secure fit for your newborn. 2. Adjust harness and tether strap hardware: Make sure that the harness and tether strap hardware are not adjusted too close to the occupant. This will ensure that there is enough space for your newborn and prevent discomfort. 3. Use correct seatbelt path: Ensure that you are using the correct seatbelt path and that the baby capsule is installed in the correct rearward-facing direction. Refer to the manual for specific instructions on seatbelt installation. 4. Avoid wrapping the baby: Do not wrap your newborn in a blanket or swaddle while in the baby capsule, as this can increase the risk of ejection in an accident. The harness should fit the baby firmly without any additional coverings. 5. Ensure freedom of movement: Make sure that the baby's legs and arms are not bound or wrapped together. This will allow for proper movement and comfort during travel. Remember to always refer to the Maxi-Cosi Mico 12 baby capsule manual for detailed instructions and guidelines on fitting your newborn properly.

How do I detach the Maxi-Cosi Mico 12 baby capsule from the base?

To detach the Maxi-Cosi Mico 12 baby capsule from the base, follow these steps: 1. Locate the release handle: Find the release handle located at the back of the baby capsule. It is usually colored red for easy identification. 2. Press the release handle: Firmly press and hold the release handle while lifting the baby capsule slightly off the base. This will disengage the locking mechanism. 3. Lift the baby capsule: Once the release handle is pressed, lift the baby capsule straight up to detach it from the base. Ensure that the baby capsule is securely held while lifting. 4. Check for detachment: After lifting the baby capsule, check that it is completely detached from the base by gently pulling it away from the base. It should come off easily without any resistance. 5. Store the base: If you no longer need the base, you can remove it from the vehicle and store it safely until the next use. Remember to always refer to the Maxi-Cosi Mico 12 baby capsule manual for detailed instructions and any specific guidelines related to detaching the baby capsule from the base.

Is the manual of the Maxi-Cosi Mico 12 available in English?

Yes, the manual of the Maxi-Cosi Mico 12 is available in English .

Is your question not listed? Ask your question here

No results