, remove any currently installed display drivers. Restart your
computer for the changes to take effect.
After your computer restarts, you’re prompted to install drivers for the new graphics
hardware detected. Click
Cancel
.
b
Turn off your computer and all peripherals such as your monitor or printer.
c
Open the computer and remove your existing graphics card (if any). (If graphics
hardware is built into the motherboard of your computer, you may need to disable it
manually. For more information, see your system manual.)
2
Choose an expansion slot
Most computers have different types of
expansion slots. Choose a PCI Express
(PCIe) ×16 or ×1 slot depending on the
type of card you have. Your system manual
should identify the location of each type of
expansion slot in your computer.
*With multi-display mode, you may be able to use your existing graphics card. For Windows XP, see Windows XP online help
under “Install additional monitors”. For Windows Vista, see Windows Vista online help under “Add a second monitor”.
(Back of computer)
(32-bit)
(×16)
(×1)
(64-bit)
PCI slots
PCI
Express
slots
Note:
We recommend using a PCIe ×16 slot with 16 lane support. If your system has
multiple PCIe ×16 slots, your choice of PCIe slot may affect your card or system
performance. For more information, see your computer manual.
Manual
View the manual for the Matrox M9128 LP PCIe x16 here, for free. This manual comes under the category video cards and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Matrox M9128 LP PCIe x16 or do you need help? Ask your question here
Need help?
Do you have a question about the Matrox and is the answer not in the manual?
Question and answer
Number of questions: 0