If you experience problems with your Matrox product:
Make sure your Matrox card is properly installed, you’re using the correct connectors,
and that all connectors are properly fastened. For more information, see “Installing your
graphics hardware”, page 7 and “Connecting your monitors”, page 12.
Review the documentation provided with your Matrox product, including the
information in this section, to see if your problem is already addressed.
If your problem persists, contact Matrox. For more information, see “Customer support”, page 38.
Common problems and solutions
This section addresses common problems that could prevent you from using your computer or
graphics hardware.
Problem Computer doesn’t display information or boot after Matrox card is
installed
1
Cause
If you have more than one PCIe ×16 slot, your graphics card may be using a slot that doesn’t
have 16 lane support.
1
Solution
Try moving the PCIe card to another PCIe slot in your computer. For more information on
the PCIe support of your system, see your system manual.
2
Cause
There may be unsupported graphics hardware in your computer.
1
Solution
If graphics hardware is built into your computer motherboard, your system may not have
automatically disabled it when you inserted your Matrox card. Check your system manual for
instructions on how to disable your computer’s built-in graphics hardware.
3
Cause
The BIOS of your Matrox graphics card may need to be updated or restored.
1
Solution
For advanced users
– If your primary display is unusable and you have another
VGA-compatible graphics card (PCI™):
1
Turn off your computer and insert the other graphics card into an expansion slot. For
more information on expansion slots, see “Choose an expansion slot”, page 8.
Manual
View the manual for the Matrox M9128 LP PCIe x16 here, for free. This manual comes under the category video cards and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Matrox M9128 LP PCIe x16 or do you need help? Ask your question here
Need help?
Do you have a question about the Matrox and is the answer not in the manual?
Question and answer
Number of questions: 0