Master Lock X055ML manual

Master Lock X055ML
6.8 · 1
PDF manual
 · 20 pages
English
manualMaster Lock X055ML
2

Bolt-Down Instructions

To help provide maximum security, it is highly recommended
that you bolt down your safe.
1
Set the safe in the place you intend to bolt it down and open the
door.
2
Using a pencil mark the floor through the holes provided in the
bottom or back of your safe.
3
Move the safe away and drill holes of the appropriate diameter
and depth for the type of hardware being used and the mounting
surface.
4
Place the safe back over the holes and install the fasteners as
required.
Note: It is not recommended to attempt to bolt your safe to
both the floor and wall. If bolting to a wall, please ensure the
safe is resting on a supporting surface such as a table or shelf.

Thank you for choosing Master Lock to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Security Safe

For Key Lock Safes

Your Master Lock product is equipped with a high security key lock.
Two (2) keys are provided.

For Digital Combination Safes

Opening Your Safe for the First Time (Using the Override Key)
1
Remove the cover located between the knob
and keypad.
2
Insert the override key provided and turn
counterclockwise.
3
Turn the knob clockwise to open the door.
4
Turn key back clockwise to remove the key and replace the cover
on the door.
Note: In an emergency, situation the safe can be opened using your
override key. DO NOT store your override key inside the safe.
Installing the Batteries
1
With the door open, remove the battery compartment cover located
on the inside of the door by sliding the cover in the direction of the
arrow.
2
Install four (4) AA size alkaline batteries.
Note: Follow the polarity (+/-) markings in the battery
compartment to ensure proper installation.
3
Slide the battery cover back into place.
Note: Do not use rechargeable batteries or
any other type of non-alkaline battery. Do
not mix old and new batteries. Do not mix
alkaline and other battery types.

Using Your Security Safe

IMPORTANT: All security safe models initially work using the
factory code 1-7-5-0-0 -#. It is highly recommended and important
to the security of your valuables that you re-program the safe with a
new user code. Once reprogrammed the factory code can no longer be
used to open your safe.
Programming Your New User Code
1
Open the safe’s door and remove the battery compartment cover.
2
Locate the button inside the battery
compartment and press.
The yellow LED light will go on.
3
Enter a new user code (between 2-8
digits) followed by the “#” key. The
yellow LED light will go off to indicate
the new code has been accepted and
stored.
4
Replace the battery compartment cover.
Note: Always test a new code before storing any valuables
inside the safe.
Unlocking Your Safe
1
Enter your factory code or user code followed by #.
2
The green LED light will go and remain on for 5 seconds.
3
Within 5 seconds, turn the knob clockwise and pull open
the door.
Locking Your Safe
1
With the bolts retracted into the door, firmly close the door of
the safe.
2
Turn the knob in the counter-clockwise direction to secure your
safe.
THE PROBLEM: WHY IT IS HAPPENING: THE SOLUTION:
A red LED light goes on when a button is
pressed.
Battery power is low. Install four (4) new AA size alkaline batteries.
Open with override key.
Digital lock is unresponsive when attempting
to press in code.
Battery power is low. Install four (4) new AA size alkaline batteries.
Open with override key.
5 beeps and a yellow LED light after entering
your code.
Invalid code. Wait one minute and retry your code.
Open with override key.

Troubleshooting

:
masterlock.eu/safes
ENGLISH

Manual

View the manual for the Master Lock X055ML here, for free. This manual comes under the category safes and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Master Lock X055ML or do you need help? Ask your question here

Need help?

Do you have a question about the Master Lock and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Master Lock X055ML specifications

Below you will find the product specifications and the manual specifications of the Master Lock X055ML.

The Master Lock X055ML safe is a secure storage solution made of steel, weighing approximately 6400 grams. It has interior dimensions of 346 centimeters in width, 220 centimeters in height, and 216 centimeters in depth. The safe features a combination lock mechanism, providing an added level of security. Designed for practicality, the safe boasts a spacious interior, allowing for ample storage of personal belongings, important documents, or valuables. Its dimensions make it suitable for a variety of items, and its sturdy steel construction ensures durability over time. With its combination lock, the Master Lock X055ML offers a reliable and customizable method of access. This allows the user to set a unique combination of numbers, ensuring that only those with knowledge of the combination can open the safe. The sturdy steel material not only provides strength and security but also adds an element of durability to the safe. This ensures that the contents remain protected, even in the event of accidental impacts or attempted breaches. The external dimensions of the safe are approximately 350 millimeters in width, 270 millimeters in depth, and 220 millimeters in height. These compact dimensions allow for convenient placement in various locations, whether it be in a closet, under a desk, or on a shelf. In conclusion, the Master Lock X055ML safe is a secure storage solution made of durable steel. With its combination lock and spacious interior, it offers reliable protection for personal belongings and valuables. Its compact dimensions make it a versatile option for placement in various locations.

General
BrandMaster Lock
ModelX055ML | X055ML
Productsafe
EAN0049074025700
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Interior dimensions (W x D x H)346 x 220 x 216 mm
Height220 mm
Width350 mm
Depth270 mm
Weight6400 g
Features
MaterialSteel
Product colorBlack, Grey
Lock typeCombination lock
Technical details
Height220 mm
Width350 mm
Depth270 mm
Weight6400 g
MaterialSteel
Product colorBlack, Grey
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Master Lock X055ML below.

What is the weight of the Master Lock X055ML?

The Master Lock X055ML has a weight of 6400 g.

What is the height of the Master Lock X055ML?

The Master Lock X055ML has a height of 220 mm.

What is the width of the Master Lock X055ML?

The Master Lock X055ML has a width of 350 mm.

What is the depth of the Master Lock X055ML?

The Master Lock X055ML has a depth of 270 mm.

Is the Master Lock X055ML made of steel?

Yes, the Master Lock X055ML is made of steel. This ensures durability and provides a high level of security compared to safes made of other materials.

What are the interior dimensions of the Master Lock X055ML?

The interior dimensions of the Master Lock X055ML are 346 x 220 x 216 mm. This provides enough space for storing valuable items such as documents, jewelry, or electronic devices.

Does the Master Lock X055ML have a combination lock?

Yes, the Master Lock X055ML features a combination lock. This eliminates the need to carry a key and ensures that only authorized individuals can access the contents of the safe.

How do I reset the user code on the Master Lock X055ML safe?

To reset the user code on the Master Lock X055ML safe, follow these steps: 1. Open the safe using the master key. 2. Locate the reset button on the inside of the safe door. 3. Press and hold the reset button for 5 seconds until you hear a beep sound. 4. Release the reset button. 5. Enter a new user code of your choice using the keypad. 6. Confirm the new user code by entering it again. 7. Close the safe door and test the new user code to ensure it is working properly. If you encounter any issues during the process, such as an invalid code or the safe not responding, try the following troubleshooting steps: - Wait for a minute and then retry entering the code. - If the digital keypad is not responding, check the battery. Install four new AA alkaline batteries if needed. - If you forget the user code or encounter any other problems, refer to the manual or contact Master Lock customer support for further assistance. Please note that these instructions are specific to the Master Lock X055ML safe and may vary for other models.

Why is the digital combination not working on my Master Lock X055ML safe?

The digital combination on your Master Lock X055ML safe may not be working due to the following reasons: 1. Low Battery Power: If the battery power is low, the digital lock may become unresponsive. To resolve this, install four new AA size alkaline batteries. You can access the battery compartment by removing the battery compartment cover located on the inside of the door. 2. Invalid Code: If you hear 5 beeps and see a yellow LED light after entering your code, it indicates that the code is invalid. Wait for one minute and retry your code. If the issue persists, open the safe using the override key. If you continue to experience difficulties with the digital combination, please refer to the troubleshooting section in the manual or contact Master Lock customer support for further assistance.

How do I change the batteries on the Master Lock X055ML safe?

To change the batteries on your Master Lock X055ML safe, follow these steps: 1. Locate the battery compartment cover on the inside of the safe door. 2. Use a screwdriver or a coin to rotate the battery compartment cover counterclockwise until it is fully open. 3. Remove the old batteries from the battery compartment and dispose of them properly. 4. Insert four new AA size alkaline batteries into the battery compartment, ensuring the correct polarity (+/-) alignment. 5. Close the battery compartment cover by rotating it clockwise until it is securely fastened. 6. Test the functionality of the safe by entering your code and opening the door. 7. If the safe does not respond or the digital display is dim, check the battery installation and ensure the batteries are fully charged. 8. If you continue to experience issues with the batteries or the safe's functionality, refer to the troubleshooting section in the manual or contact Master Lock customer support for further assistance.

What should I do if I forget the override key for my Master Lock X055ML safe?

If you forget the override key for your Master Lock X055ML safe, you can follow these steps to regain access: 1. Contact Master Lock Customer Support: Reach out to Master Lock customer support and provide them with the necessary information, such as the safe's model number and serial number. They will guide you through the process of obtaining a new override key. 2. Provide Proof of Ownership: Master Lock may require you to provide proof of ownership, such as a purchase receipt or other documentation, to ensure the security of the safe. 3. Follow the Instructions: Once you receive the new override key from Master Lock, carefully follow the instructions provided to use the key and open the safe. It is important to note that the process of obtaining a new override key may vary depending on your location and specific circumstances. Contacting Master Lock customer support is the recommended course of action to ensure a smooth resolution to the issue.

Why is the bolt-down kit not fitting properly on my Master Lock X055ML safe?

If the bolt-down kit is not fitting properly on your Master Lock X055ML safe, you can follow these steps to troubleshoot the issue: 1. Check Compatibility: Ensure that the bolt-down kit you are using is specifically designed for the Master Lock X055ML safe. Using a kit that is not compatible may result in improper fitting. 2. Verify Correct Alignment: Make sure that the holes on the safe and the holes on the bolt-down kit align properly. Misalignment can prevent the kit from fitting securely. 3. Adjust Hole Placement: If the holes do not align, check if the bolt-down kit allows for adjustable hole placement. Some kits have multiple hole options to accommodate different safe models. Adjust the hole placement as needed to achieve proper alignment. 4. Use Correct Tools: Ensure that you are using the appropriate tools to install the bolt-down kit. Follow the instructions provided with the kit and use the recommended tools for installation. 5. Seek Professional Assistance: If you have followed the above steps and the bolt-down kit still does not fit properly, consider seeking professional assistance. Contact Master Lock customer support or consult a locksmith who specializes in safe installations for further guidance. By following these steps, you can troubleshoot and address the issue of the bolt-down kit not fitting properly on your Master Lock X055ML safe.

How do I reset the user code on the Master Lock X055ML safe?

To reset the user code on the Master Lock X055ML safe, follow these steps: 1. Open the safe using the master key. 2. Press the reset button located on the inside of the safe door. 3. Enter a new user code of your choice using the keypad. 4. Press the reset button again to confirm the new code. 5. Close the safe door and test the new user code to ensure it is working properly. If you encounter any issues during the process, such as an invalid code or the safe not responding, try the following troubleshooting steps: 1. Wait for a minute and then retry entering the code. 2. If the issue persists, open the safe using the master key and check the battery. If the battery is low, replace it with four new AA alkaline batteries. 3. If the problem still persists, refer to the troubleshooting section of the manual or contact customer support for further assistance. Please note that these instructions are specific to the Master Lock X055ML safe and may vary for other models.

What should I do if the safe does not unlock with the key?

If the Master Lock X055ML safe does not unlock with the key, follow these steps to troubleshoot the issue: 1. Check the battery level: If the electronic lock does not respond when you try to unlock it with the key, it may be due to low battery power. Install four new AA alkaline batteries to ensure sufficient power. 2. Use the master key: If the electronic lock still does not unlock with the key, use the master key provided with the safe to open it. Insert the master key into the designated slot and turn it clockwise to unlock the safe. 3. Contact customer support: If neither of the above steps resolves the issue, it is recommended to contact Master Lock customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for repair or replacement if necessary. Please note that these steps are specific to the Master Lock X055ML safe and may vary for other models.

How do I change the batteries in the digital combination lock of the Master Lock X055ML safe?

To change the batteries in the digital combination lock of the Master Lock X055ML safe, follow these steps: 1. Open the safe door. 2. Locate the battery compartment cover on the inside of the door. 3. Slide the battery compartment cover in the direction indicated to remove it. 4. Remove the old batteries from the compartment. 5. Install four new AA size alkaline batteries into the compartment, following the polarity markings (+/-) to ensure proper installation. 6. Slide the battery compartment cover back into place. 7. Close the safe door. Please note that it is important to use only AA size alkaline batteries and avoid using rechargeable batteries or mixing old and new batteries. If you encounter any issues after changing the batteries, refer to the troubleshooting section of the manual or contact customer support for further assistance. These instructions are specific to the Master Lock X055ML safe and may vary for other models.

What should I do if the safe door does not close properly?

If the Master Lock X055ML safe door does not close properly, follow these steps to address the issue: 1. Check for any obstructions: Ensure that there are no objects or debris blocking the safe door from closing fully. Remove any items that may be obstructing the door. 2. Inspect the door hinges: Examine the hinges of the safe door for any signs of damage or misalignment. If the hinges are damaged or misaligned, contact customer support for further assistance. 3. Adjust the door alignment: If the door appears to be misaligned, gently push or pull the door to realign it with the safe body. Ensure that the door is properly aligned with the locking mechanism. 4. Lubricate the door hinges: Apply a small amount of lubricant, such as graphite powder or silicone spray, to the hinges of the safe door. This can help improve the smoothness of the door movement. 5. Test the door closure: Close the safe door and check if it closes securely and locks properly. If the issue persists, refer to the troubleshooting section of the manual or contact customer support for further assistance. Please note that these steps are specific to the Master Lock X055ML safe and may vary for other models.

How do I secure the Master Lock X055ML safe to the floor?

To secure the Master Lock X055ML safe to the floor, follow these steps: 1. Choose a suitable location: Select a secure and accessible location on the floor where you want to install the safe. 2. Mark the hole locations: Place the safe in the desired position and use a pencil or marker to mark the hole locations on the floor through the pre-drilled holes in the safe's base. 3. Prepare the floor: Clear any debris or obstructions from the marked hole locations on the floor. 4. Drill pilot holes: Use a suitable drill bit to drill pilot holes into the marked locations on the floor. The size of the drill bit should match the size of the anchor bolts provided with the safe. 5. Insert anchor bolts: Insert the anchor bolts into the pilot holes, ensuring they are flush with the floor. 6. Secure the safe: Place the safe over the anchor bolts and align the holes in the safe's base with the anchor bolts. Use a wrench or socket set to tighten the nuts onto the anchor bolts, securing the safe to the floor. 7. Test the stability: Once the safe is securely fastened to the floor, test its stability by gently shaking or applying pressure to ensure it is firmly anchored. Please note that these steps are specific to the Master Lock X055ML safe and may vary for other models.

Is the manual of the Master Lock X055ML available in English?

Yes, the manual of the Master Lock X055ML is available in English .

Is your question not listed? Ask your question here

No results