Master Lock LFW205TWC manual

Master Lock LFW205TWC
9.7 · 1
PDF manual
 · 60 pages
English
manualMaster Lock LFW205TWC
2
ENGLISH

Your Master Lock Product

Your Master Lock product has a number of features to keep your
important documents and valuables protected including:
Water Protection UL Classified
Fire Protection
Digital Media
Protection

Loud Audible Alarm

THE LOUD AUDIBLE ALARM ALERTS YOU WHEN:

The safe is picked up
or moved
There is an attempt
to pry the door open
The wrong combination
is entered 5 times

Using Your Master Lock

Alarm Safe

Preparing Your Safe for First Time Use
1
2
3
Remove lock out screw indicated by the
yellow tag on the inside of the door
of the safe.
Remove battery compartment from
inside door and insert 4 AAA alkaline
batteries. DO NOT use rechargeable
batteries or any other type of non-
alkaline battery. Do not mix old and
new batteries. Do not mix alkaline and
standard batteries.
Replace battery compartment.
Using Your Safe
1
2
3
Touch the keypad to wake up the safe.
Enter the 5 digit factory code found on
the back of this owner’s manual.
Turn handle to open safe.
IMPORTANT: Test your code several times before putting
valuables inside.
IMPORTANT: If you exert too much force on the handle,
the handle will move without moving the bolts. When this
happens, you will hear a ’click.’ DO NOT be alarmed.
This feature is designed to protect the bolts from being
over powered by force. Simply exert force in the opposite
direction (lifting up) until the handle clicks back
into place.
1
Close and lock the door of your safe.
Touch the keypad to wake up the safe.
Press: “0” – “PROG” – “9
The alarm indicator will blink every
10 seconds to indicate the alarm has
been activated.
IMPORTANT: Like a home alarm system, the alarm must
be set each time you lock your safe to activate the
audible alert. In the event your alarm is not activated
and 5 wrong code attempts are entered, the safe will
go into delay mode for 2 minutes. No alarm will go off
when moved, jarred or with attempted forced entry.
2

Thank you for choosing Master Lock to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Water/Fire Resistant Alarm Safe

Setting the Alarm

Turning off the Alarm
If the loud audible alarm on your safe has been triggered:
1
2
Touch the keypad to wake up the safe.
Enter a valid code.
NOTE: You will need to enter your code again to open the safe.
NOTE: The Factory Code (FC) or User Code (UC) must be
entered to program safe settings. A secondary code cannot
be used.
Changing Alarm Sensitivity
You can change the level of sensitivity on your safe alarm from a scale
of zero “0” to “5”. Zero “0” being the least sensitive only responding
to incorrect codes and “5” being the most sensitive to slight
movement of the safe.
1
2
Touch the keypad to wake up the safe.
Press: “0” – “PROG” – “PROG” – (FC)OR(UC)3
Then press 0”, “1”, “2”, “3”, “4 OR 5 to program your
desired sensitivity.
3
Changing Length of Alarm
You may also change the length of which your alarm will sound once
triggered from 01 to 99 minutes.
1
2
Touch the keypad to wake up the safe.
Press: “0” – “PROG” – “PROG” – (FC)OR(UC)4
Then press any number between 01 and 99 to indicate the
number of minutes you would like your alarm to sound
once triggered.
3

Audible Alarm

Features

The safe is jolted,
hit or jarred
3
FACTORY CODE (FC): The safe will ALWAYS unlock using this 5
digit code (found on the back of this owner’s manual). This code
cannot be deleted or changed.
USER CODE (UC): A 5 digit programmable code of your choosing
that can be changed or deleted.
SECONDARY CODE (SC): A 5 digit programmable code of your
choosing that can be changed or deleted. Can only be
programmed after a user code has been activated.

Programmable Codes

Your Master Lock safe comes with 3 types of codes for
accessing your safe. For more information on programming
these codes see the “Programming Safe Features” section of
this owner’s manual.

Manual

View the manual for the Master Lock LFW205TWC here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Master Lock LFW205TWC or do you need help? Ask your question here

Need help?

Do you have a question about the Master Lock and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Master Lock LFW205TWC specifications

Below you will find the product specifications and the manual specifications of the Master Lock LFW205TWC.

General
BrandMaster Lock
ModelLFW205TWC | LFW205TWC
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Master Lock LFW205TWC below.

Is the manual of the Master Lock LFW205TWC available in English?

Yes, the manual of the Master Lock LFW205TWC is available in English .

Is your question not listed? Ask your question here

No results