Introduction The Marshall reputation has been built upon many things, but our longevity
comes mainly as a result of the continual relevance of the concepts behind the
design and build of our amplifiers. Added to this are solid workmanship , r eliability ,
stylish looks, and abov e all – gr eat tone.
One of the most versatile Marshalls e ver made , the Lead and Bass 50 watt combo , was offered for
sale through Mail Order from 1973 thr ough 1976. Its original model number was the 2100 and was a
re volution in its day , combining one channel from a bass amp and one fr om a lead amp . Produced in fairly
low numbers, these combos are now much sought after for their simplicity of operation and superb natural
valve tone. The continual fascination and love that many guitarists show for our vintage amplification is a
testament to just how rele vant and important these models still are toda y .
Achieving the beautifully organic and vibrant overdriv e which is their trademark, can onl y be done in one wa y – crank’em
up! The result is pure majestic tone , unclutter ed by unnecessar y circuitry . With solos this produces a big, round, warm
sustain, full of classic character . With chor d work you get a bark and percussiv e attack with a natural sounding break up,
which allows each note to ring out in a glorious musical crunch.
Like all Marshalls re-issues the 1987X-PW Lead and Bass Fifty Combo is as faithful as possible to the originals in terms of
construction and tone. Hand-crafted in the UK these superb units feature finger -jointed cabinets of bir ch plyw ood, hand-welded
chassis’ s, hand-wired transformers, potentiometers and valv e bases and the highest quality PCBs and components.
1. PO WER SWITCH
This is the On/Off switch for mains power to the
amplifier .
Note: Please ensure the amplifier is s witched off and
unplugged from the mains electricity supply whenever it
is moved.
2. ST ANDBY SWITCH
The Standby Switch is used in conjunction with the
Po wer Switch (item 1) to ‘warm up’ the amplifier before
use and to prolong the life of the output valves.
When powering up the amplifier alwa ys engage the
Po wer Switch first, leaving the Standby switch on
‘Standby’. This allows the application of the voltage
requir ed to heat the valves to their correct operating
temperature. After appr oximately two minutes the
valves will ha ve reached the corr ect operating
temperature and the Standby Switch can be engaged.
In order to prolong valve life , the Standb y Switch alone
should also be used to turn the amplifier on and off
during breaks in a performance. Also, when switching
off, alwa ys disengage the Standby Switch prior to the
main Power Switch.
3. INICA T OR
The Indicator will light up when your amplifier is
receiving the corr ect mains power and is switched on. It
will not be lit when the amplifier is switched off and/or
is not receiving mains pow er .
4. PRESENCE CONTROL
This control operates in the 1987X-PW’ s pow er section
and adds high frequencies to your sound b y altering the
power amplifier’ s negativ e feedback. T urning this contr ol
clockwise adds more edge and ‘sparkle’ to your sound,
making it crisper and more cutting.
5. BASS CONTROL
This adjusts the bottom end, turning it clockwise
increases the amount of low frequencies in the sound.
6. MIDDLE CONTROL
This adjusts the level of those all-impor tant mid-range
frequencies. T urning it clockwise increases the mids and
fattens your sound, giving it more punch. T urning it
anticlockwise reduces the mids.
7. TREBLE CONTROL
This adjusts the top-end. T urning it clockwise incr eases
the amount of high frequencies (treble) present in the
sound, making your tone brighter .
Note: The following four controls - PRESENCE (item
4), B ASS (item 5), MIDDLE (item 6) & TREBLE (item 7) -
are all shar ed, meaning that they all w ork on both
Channel I and Channel II. The T reble, Middle and Bass
controls are highly interactive and altering one control
can change the way the other two behave. For this
reason, experimentation is recommended.
Paul’ s Pr eferred settings, as shown on the panel abov e:
P = 6, B = 10, M = 10, T = 4, VI = 2,VII = 0
8. V OLUME I
This controls the overall output level of Channel I,
turning it clockwise increases the volume. This is the
1987 super -lead channel and is voiced for a higher treble
response than Channel II.
9. V OLUME II
This controls the overall output level of Channel II,
turning it clockwise increases the volume level. This is
the 1986 super -bass channel and is voiced for a 'bass',
flatter response.
10. HIGH SENSITIVITY INPUT FOR
CHANNEL I
This is the ‘high sensitivity’ guitar input for Channel I –
the “Lead” channel is the brighter of the two channels -
and is the most commonly used input. Alwa ys use a high
quality screened guitar lead.
11. LO W SENSITIVITY INPUT FOR
CHANNEL I
This is the ‘low sensitivity’ guitar input for Channel I. It is
6dB lower in volume than the ‘high sensitivity’ input and
has a darker sound as well due to its significantl y low er
input impedance .
12. HIGH SENSITIVITY INPUT FOR
CHANNEL II
This is the ‘high sensitivity’ guitar input for Channel II,
the so-called ‘Bass’ channel.
13. LO W SENSITIVITY INPUT FOR
CHANNEL II
This is the ‘low sensitivity’ guitar input for Channel II. It
is 6dB lower in volume than the ‘high sensitivity’ input
and has a darker sound as well due to its significantly
lower input impedance .
P erformance Note: Bridging or ‘jumping’
the tw o channels
Because both Channels of the 1987X-PW ha ve the
same number of gain stages (two) and are therefor e in
phase with each other , it is possible to bridge them
together (‘slaving’, ‘jumping’, ‘linking’ or ev en ‘daisy-
chaining’) and use them both at the same time. Doing
this enables you to expand upon the amp’ s tonal
possibilities by mixing the two channels together .
The most common way of doing this is to plug your
guitar into the top (high sensitivity) input of Channel I
and then run a short ‘jumper’ guitar cable (i.e. a
screened cable) fr om the Channel I’ s bottom (low
sensitivity) input to the top (high sensitivity) input of
Channel II. (fig. 1)
The ‘rev erse’ is also possible – namely plugging y our
guitar into Channel II’ s top input and then running the
‘jumper’ cable from Channel II’ s bottom input to
Channel I’ s top input. This less common appr oach can
yield some interesting tonal variations. (fig. 2)
From Jim Marshall I would personally like to congratulate you for
choosing this incredibly special amplifier from
Marshall - the Lead and Bass 1987X-PW .
As you ha ve heard the 2100 was initially launched in
1973 and has been the work-horse of many a guitarist
seeking the best of both lead and bass worlds. The
warm yet attacking tone cr eated fr om these amps
pro ved extremely popular with the emerging generation
of guitarists and, I’m pleased to sa y , means that the Lead
and Bass 50 is still held in high regar d toda y . One
guitarist who fa vours the 2100 just happens to be one
of the most respected and influential singer/songwriters
of recent times - Paul W eller .
I feel very for tunate to ha ve enjoyed many years of
friendship and associations with some of the
most talented guitarists in living memor y . The
fact that an ar tist of Paul’ s calibr e chooses a
Marshall is a ver y humbling feeling indeed. So
to celebrate both our long standing musical
partnership and Paul’ s 50th birthday , I ask ed
the Marshall team to create a special Limited Edition amplifier based on the
2100 Lead and Bass 50 Combos. In response the y ha ve produced an amp
brimming full of vintage tone and style, indicative of the ‘Mod Father’ himself.
Apart fr om our love of music, both Paul and m yself ar e committed to
raising money for very w or th y causes. In purchasing this amplifier you
ha ve ensured a substantial donation will be made by Marshall to the
Childline charity . Offering help and advice to children who need it
most, Childline is a vital ser vice to the young and one which we are
proud to suppor t.
All 50 of the 1987X-PW amplifiers ha ve been hand-built in the UK
by our highly skilled staff on the Marshall factory floor . Their
attention to detail, craftsmanship and exacting standards ha ve
been the foundation on which Marshall’ s reputation has been
built, so you can rest assur ed that your 1987X-PW will stand the
test of time.
I sincerely hope that your ne w amplifier brings you years of
guitar playing pleasure and enjoyment. W elcome to the famil y .
Y ours Sincerely
Dr Jim Marshall OBE
Fig. 1 Fig. 2
1 2 3 4 5 6 7 8 9 11
10 12 13
The Lead Bass Fifty has been my main amp for the last ten years or so, nothing comes close to it, till now “
”
photo
©
Lawr ence W atson
Need help?
Do you have a question about the Marshall and is the answer not in the manual?
Question and answer
Number of questions: 0