
Do you have a question about the Marantz SR5023 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Marantz SR5023 owners to properly answer your question.




View the manual for the Marantz SR5023 here, for free. This manual comes under the category Receivers and has been rated by 3 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Marantz SR5023 or do you need help? Ask your question here

| Audio output channels | 2.0 channels |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| Power output per channel (1KHz@8 Ohm) | 80 W |
| Power output per channel (1KHz@6 Ohm) | 100 W |
| Total Harmonic Distortion (THD) | 0.08 % |
| Input sensitivity | 200 mV |
| Input impedance | 47000 Ω |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Frequency range | 10 - 50000 Hz |
| Audio (L/R) in | 6 |
| Audio (L/R) out | 1 |
| Headphone outputs | 1 |
| Speakers connectivity type | - |
| AM antenna ports quantity | 1 |
| FM antenna ports quantity | 1 |
| Ethernet LAN | ✗ |
| Wi-Fi | - |
| Supported radio bands | AM,FM |
| Radio Data System (RDS) | ✓ |
| RDS features | PS,PTY,RT |
| Auto digital tuning | ✓ |
| Preset stations quantity | 50 |
| Optical drive included | - |
| Card reader integrated | - |
| Display | LCD |
| Audio decoders | - |
| Equalizer | ✓ |
| Remote control included | ✓ |
| Product colour | Gold,Silver |
| Bass adjustment | ✓ |
| Treble adjustment | ✓ |
| Sleep timer | ✓ |
| Volume control | Rotary |
| Apple docking compatibility | iPod |
| Power consumption (typical) | 150 W |
| Power consumption (standby) | 0.4 W |
| Width | 440 mm |
| Depth | 367 mm |
| Height | 105 mm |
| Weight | 7800 g |
| Cables included | AC |
| Remote control type | RC002SR |
Below, you will find the most frequently asked questions about the Marantz SR5023.
Is your question not listed? Ask your question here
how can i play a set of two speakers on my SR 5023