Makita UH5530 manual

Makita UH5530
7 · 1
PDF manual
 · 44 pages
English
manualMakita UH5530
2

Thank you for purchasing a MAKITA product!

Congratulations on choosing a MAKITA hedge trimmer!
We are confident that you will be satisfied with this modern
machine.
Models UH 4030, UH 4830, UH 5530 and UH 6330 are very
light and handy hedge trimmers, with high performance and
a good power-to-weight ratio.
The ergonomic design of the grips and controls make for
comfortable and untiring operation during extensive jobs. A
strain reliever is provided for the power cord at both ends.
The safety features of the UH 4030, UH 4830, UH 5530 and
UH 6330 hedge trimmers are state of the art and meet all
international standards. These features include hand guards
on both handles, 2-hand grip safeties and a quick-stop function.
In order to ensure the proper functioning and performance
of your new hedge trimmer, and to safeguard your own
personal safety, it is imperative that you read this instruc-
tion manual thoroughly before operation. Be especially
careful to observe all safety precautions! Failure to ob-
serve these precautions can lead to severe injury or
death!

Table of contents

EU Conformity Declaration................................................2
Packaging ............................................................................2
Symbols ...............................................................................2
Delivery inventory ..............................................................3
SAFETY PRECAUTIONS ....................................................3
General precautions........................................................3
Protective equipment ......................................................3
Putting into operation.................................................. 3-4
Extension power cord .....................................................4
Transport and storage ....................................................4
Maintenance....................................................................4
First aid ...........................................................................4
Working technique ..........................................................5
Tips on hedge-trimming.....................................................5
Environmental protection information.............................5
Technical data.....................................................................6
Designation of components ..............................................6
PUTTING INTO OPERATION..............................................7
Checking the blade brake ..............................................7
MAINTENANCE ...................................................................7
Cleaning and maintaining the cutter...............................7
Instructions for periodic maintenance.............................7
Trouble shooting ................................................................7
Service, spare parts and guarantee .................................8
Service centres (see enclosure)

EU Conformity Declaration

The undersigned, Junzo Asada and Rainer Bergfeld, as
authorized by DOLMAR GmbH, declare that the MAKITA
machines,
Type: UH 4030, UH 4830, UH 5530, UH 6330
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU guidelines:
EU Machine guideline 98/37/ EG
EU EMC guideline 89/336/ EWG (modified by 91/263/ EWG,
92/31/ EWG and 93/68/ EWG)
EU Low-voltage guideline 73/23/ EWG (modified by 93/68/
EWG)
The most important standards applied to properly meet the
requirements of the above EU guidelines were: EN 50144-1,
EN 50144-2-15, EN 55104, EN 55014, EN 61000-3-T2/-T3.
Hamburg, 6.12.1999
For DOLMAR GmbH
Junzo Asada Rainer Bergfeld
Managing Director Managing Director

Symbols

You will notice the following symbols on the hedge trimmer
and in the Instruction Manual:

Packaging

Your MAKITA hedge trimmer is delivered in a cardboard box
to protect it during shipping.
Cardboard is a basic raw material and is consequently
reuseable or suitable for recycling (waste paper recycling).

RE Y

STOP
RE Y
Read Instruction Manual and follow
all warnings and safety instructions!
Particular care and attention!
Forbidden!
Protect from rain and moisture!
Pull mains plug if power cord is damaged!
Pull mains plug!
Double protective insulation
Switch off motor!
Wear protective gloves!
Wear eye and hearing protection!
First aid
Recycling
CE-marking

Manual

View the manual for the Makita UH5530 here, for free. This manual comes under the category hedge trimmers and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Makita UH5530 or do you need help? Ask your question here

Need help?

Do you have a question about the Makita and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Makita UH5530 specifications

Below you will find the product specifications and the manual specifications of the Makita UH5530.

General
BrandMakita
ModelUH5530
Producthedge trimmer
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita UH5530 below.

How do I remove rust from my Makita hedge trimmer?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a hedge trimmer?

The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.

Is the manual of the Makita UH5530 available in English?

Yes, the manual of the Makita UH5530 is available in English .

Is your question not listed? Ask your question here

No results