View the manual for the Makita JV0600J here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Makita JV0600J or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Makita JV0600J.
| Brand | Makita |
| Model | JV0600J | JV0600J |
| Product | saw |
| EAN | 88381640947, 0088381640947 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 650 W |
| Output power | 380 W |
| Cable length | 4 m |
| Power source | AC |
| No-load stroke rate | 3100 spm |
| Cutting depth in wood | 90 mm |
| Cutting depth in steel | 10 mm |
| Dust extraction | Yes |
| Orbital action | Yes |
| Tool-free blade change | Yes |
| Dust blower | Yes |
| Product color | Black, Blue |
| Orbital action settings | 3 |
| Bevel adjustment | Yes |
| Bevel capacity (max) | 45 ° |
| Width | 77 mm |
| Depth | 236 mm |
| Height | 199 mm |
| Weight | 2400 g |
| Carrying case | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita JV0600J below.
The Makita JV0600J has a weight of 2400 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
The Makita JV0600J has a height of 199 mm.
The Makita JV0600J has a width of 77 mm.
The Makita JV0600J has a depth of 236 mm.
Yes, the Makita JV0600J offers a tool-free blade change feature, making it convenient and easy for users to switch out blades without any additional tools required.
The Makita JV0600J has 3 orbital action settings, providing users with versatility and the option to customize the cutting action based on their specific needs.
Yes, the Makita JV0600J comes with a carrying case, allowing users to safely transport and store the saw when not in use.
The Makita JV0600J has a maximum bevel capacity of 45°, giving users the flexibility to make angled cuts up to this degree.
Yes, the Makita JV0600J is equipped with a dust blower, helping to keep the cutting area clear of debris for improved visibility and accuracy during operation.
To ensure that the blade is securely installed in the blade holder of the Makita JV0600J saw before operation, follow these steps: 1. Clean out any chips or foreign matter adhering to the blade and/or blade holder to prevent insufficient tightening of the blade. 2. Use only B type blades to ensure proper installation and avoid serious personal injury. 3. Before installing the blade, make sure the blade clamp lever is in the released position. 4. Insert the blade (teeth facing forward) into the blade holder until it latches, ensuring the lever moves to the fixed position by itself. 5. Pull the blade lightly to confirm it does not fall off during operation. 6. If the lever does not move to the fixed position by itself, do not press it manually; instead, ensure the back edge of the blade fits into the roller. 7. To remove the blade, push the lever forward as far as it will go for safe release.
When making bevel cuts with the Makita JV0600J saw, follow these precautions: 1. Ensure the tool is switched off and unplugged before tilting the tool base. 2. Loosen the bolt on the back of the base using the hex wrench. 3. Adjust the base to the desired bevel angle between 0° and 45°. 4. Tighten the bolt to secure the base in place. 5. Always hold the base flush with the workpiece during cutting to prevent blade breakage. 6. Advance the tool slowly when cutting curves to avoid slanted surfaces and blade breakage. 7. Use the front flush cuts method by sliding the base back and securing it with the bolt. 8. For cutouts, either bore a starting hole or perform plunge cutting without a starting hole. 9. To finish edges, lightly run the blade along the cut edges for trimming or adjustments.
Yes, the manual of the Makita JV0600J is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Makita and is the answer not in the manual?
Question and answer
Number of questions: 0