View the manual for the Makita JV0600 here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Makita JV0600 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Makita JV0600.
The Makita JV0600 is a corded jigsaw that is designed for cutting a variety of materials such as wood, metal, and plastics. It features a powerful 6.5-amp motor that provides ample cutting power for various applications. The saw has a variable speed control dial that allows users to adjust the cutting speed based on the material being cut. The Makita JV0600 has a tool-less blade change system that makes swapping out blades quick and easy. It also has a built-in dust blower that helps keep the cutting line clear of debris for more precise cuts. The jigsaw has a lightweight and ergonomic design, making it comfortable to use for extended periods. Additionally, the saw has a large trigger switch for easy operation and a lock-on button for continuous operation. The Makita JV0600 also has a die-cast aluminum base for added durability and stability while cutting. Overall, the Makita JV0600 is a reliable and versatile tool for various cutting tasks.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita JV0600 below.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
To prevent splintering when making cuts with the Makita JV0600 saw, follow these steps: 1. Install the rip fence: When cutting circles or arcs with a radius of 170 mm or less, insert the rip fence into the rectangular hole on the side of the base with the fence guide facing up. Insert the circular guide pin through one of the two holes on the fence guide and secure it with the threaded knob. Slide the rip fence to the desired cutting radius and tighten the bolt to secure it in place. 2. Use the anti-splintering device: For splinter-free cuts, you can use the optional anti-splintering device. Install it by moving the tool base all the way forward and fitting it from the back of the tool base. If you are using the cover plate, install the anti-splintering device onto the cover plate. 3. Trim edges: To trim edges or make dimensional adjustments, lightly run the blade along the cut edges. 4. Use a suitable coolant for metal cutting: When cutting metal, always use a suitable coolant (cutting oil) to prevent significant blade wear. Alternatively, you can grease the underside of the workpiece instead of using a coolant. 5. Connect to a vacuum cleaner: For clean cutting operations, you can connect the tool to a Makita vacuum cleaner. Insert the hose of the vacuum cleaner into the hole at the rear of the tool. By following these steps, you can achieve clean and splinter-free cuts with the Makita JV0600 saw.
To install the cover plate on the Makita JV0600 saw for cutting decorative veneers and plastics, follow these steps: 1. Start by ensuring that the tool is switched off and unplugged for safety. 2. Locate the rectangular hole on the side of the base of the saw. 3. Insert the rip fence into the rectangular hole with the fence guide facing up. 4. Take the circular guide pin and insert it through one of the two holes on the fence guide. 5. Screw the threaded knob onto the pin to secure it in place. 6. Slide the rip fence to the desired cutting radius and tighten the bolt to secure it. 7. Move the tool base all the way forward. 8. If you have the optional anti-splintering device, fit it onto the cover plate and install it from the back of the tool base. 9. Fit the cover plate on the back of the tool base. 10. The cover plate is now installed and ready to use for cutting decorative veneers and plastics. Remember to always use appropriate blades (No. B-17, B-18, B-26, or B-27) when cutting circles or arcs. And note that the anti-splintering device cannot be used when making bevel cuts. For more detailed instructions or maintenance, it is recommended to consult the Makita JV0600 saw manual or contact a Makita Authorized Service Center.
To perform regular maintenance tasks on the Makita JV0600 saw, follow these steps: 1. Clean the saw after each use: Remove any debris, sawdust, or residue from the blade, base, and other parts of the saw. Use a brush or compressed air to clean hard-to-reach areas. 2. Check the blade condition: Inspect the blade for any signs of damage, such as chips or dullness. Replace the blade if necessary to ensure clean and efficient cuts. 3. Lubricate moving parts: Apply a few drops of lubricating oil to the pivot points, gears, and other moving parts of the saw. This helps to reduce friction and prolong the lifespan of the saw. 4. Check the power cord: Regularly inspect the power cord for any signs of damage or wear. If you notice any issues, replace the cord to prevent electrical hazards. 5. Adjust the cutting action: The Makita JV0600 saw offers orbital and straight line cutting actions. Adjust the cutting action according to the material you are cutting. Refer to the manual for guidance on selecting the appropriate cutting action. 6. Use a suitable coolant for metal cutting: When cutting metal, always use a suitable coolant (cutting oil) to prevent blade wear. Alternatively, you can grease the underside of the workpiece instead of using a coolant. By following these maintenance tasks regularly, you can ensure the optimal performance and longevity of your Makita JV0600 saw.
Yes, the manual of the Makita JV0600 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Makita and is the answer not in the manual?
Question and answer
Number of questions: 0