Makita HR2630T manual

Makita HR2630T
7.2 · 1
PDF manual
 · 16 pages
English
manualMakita HR2630T
2
ENGLISH (Original instructions)

SPECIFICATIONS

Model HR2631F
HR2631FT
HR2641 HR2320T HR2630 HR2630T
Concrete 26 mm 23 mm 26 mm
Core bit 68 mm
Diamond core bit (dry type)
80 mm 70 mm 80 mm
Steel 13 mm
Capacities
Wood 32 mm
No load speed 0 - 1,200 min
-1
0 - 1,100
min
-1
0 - 1,200 min
-1
Blows per minute 0 - 4,600 min
-1
0 - 4,500
min
-1
0 - 4,600 min
-1
Overall length 361 mm 385 mm 422 mm 380 mm 361 mm 385 mm
Net weight 2.9 kg 3.1 kg 2.9 kg 2.8 kg 3.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7

Symbols

The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model HR2631F, HR2631FT, HR2641
Sound pressure level (L
pA
) : 90 dB (A)
Sound power level (L
WA
) : 101 dB (A)
Uncertainty (K) : 3 dB (A)
Model HR2320T, HR2630, HR2630T
Sound pressure level (L
pA
) : 91 dB (A)
Sound power level (L
WA
) : 102 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model HR2631F
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 12.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling function with side grip
Vibration emission (a
h,Cheq
) : 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2

Manual

View the manual for the Makita HR2630T here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Makita HR2630T or do you need help? Ask your question here

Need help?

Do you have a question about the Makita and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Makita HR2630T specifications

Below you will find the product specifications and the manual specifications of the Makita HR2630T.

The Makita HR2630T is a versatile drill machine designed for various applications. With the ability to perform drilling, hammer drilling, and chiseling, this tool offers flexibility and convenience. Its reversible function allows for easy removal of screws or fasteners. Equipped with an adjustable speed feature, users have control over the drilling process, enabling them to work at their preferred pace. The quick release system enables the effortless and quick change of accessories, enhancing efficiency during tasks. The Makita HR2630T features a soft grip handle, providing comfort and reducing fatigue during extended use. This design element ensures a secure grip, enhancing user safety and precision. Powered by an AC power source, this drill machine offers a reliable and consistent performance. With an input power of 800 W, it provides ample power for various drilling tasks. The rated speed of 1200 RPM enables efficient drilling and ensures a smooth operation. When it comes to drilling capacity, the Makita HR2630T demonstrates its capabilities. It can drill a maximum diameter of 26 mm in concrete, making it suitable for a range of construction and renovation projects. With a maximum drilling diameter of 13 mm in steel and 32 mm in wood, this drill machine offers versatility and adaptability to different materials. Overall, the Makita HR2630T is a well-designed and functional drill machine. Its features, including the adjustable speed, quick release system, and soft grip handle, contribute to its ease of use and user comfort. With its reliable power source and impressive drilling capacity, this tool is ideal for both professional use and DIY projects.

General
BrandMakita
ModelHR2630T | HR2630T
Productdrill machine
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Features
DrillingYes
Hammer drillingYes
ChiselingYes
Chuck type-
ReverseYes
Adjustable speedYes
Quick release systemYes
Soft gripYes
Product colorBlack, Blue
Power
Power sourceAC
Input power800 W
Performance
Rated speed (max)1200 RPM
Drilling diameter in concrete (max)26 mm
Drilling diameter in steel (max)13 mm
Drilling diameter in wood (max)32 mm
Weight & dimensions
Battery weight3500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita HR2630T below.

How do I remove rust from my Makita drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Can you explain how to properly assemble and disassemble the drill chuck?

To assemble the drill chuck, insert the bit into the chuck, then tighten the chuck by turning it clockwise until secure. To disassemble, hold the drill chuck with one hand while using the other hand to rotate it counterclockwise until it loosens and can be removed.

What is the recommended drilling capacity for this drill machine?

The maximum drilling capacity for the Makita HR2630T drill machine is 26 millimeters (mm) in concrete, 32 mm in wood, and 13 mm in steel. Ensure not to exceed these limits for optimal performance and avoiding damage.

How can I switch between hammering and drilling modes on this drill machine?

To switch between hammering and drilling modes, locate the mode selector switch on the side of the drill machine. Slide it to the left for hammering mode, to the right for drilling mode. Ensure the machine is turned off when making this adjustment.

How can I adjust the depth stop for drilling at a specific depth?

To adjust the depth stop, first, locate the depth adjustment knob at the base of the drill machine. Loosen the knob, slide the depth stop rod to the desired depth, then tighten the knob to secure the depth stop in place. This allows you to consistently drill at the desired depth.

How can I minimize dust and debris while using this drill machine?

To minimize dust and debris, the Makita HR2630T drill machine is equipped with a dust extraction system. Ensure the dust extraction nozzle is properly connected to a dust extraction unit or a vacuum cleaner. This will help to efficiently collect dust and debris generated during drilling, providing a cleaner workspace.

Does the Makita HR2630T have a hammer drilling function?

Yes, the Makita HR2630T has a hammer drilling function. This means that it can effectively drill into harder materials such as concrete, providing versatility for different project needs.

Can the Makita HR2630T perform chiseling tasks?

Yes, the Makita HR2630T can perform chiseling tasks. This feature allows users to not only drill holes but also chip away at surfaces when necessary, making it a practical tool for various applications.

Does the Makita HR2630T have a reverse function?

Yes, the Makita HR2630T has a reverse function. This feature is beneficial as it allows users to easily remove jammed drill bits or screws, enhancing overall convenience and efficiency during the drilling process.

Is the speed adjustable on the Makita HR2630T?

Yes, the Makita HR2630T has an adjustable speed feature. This allows users to customize the drilling speed according to the specific material and task at hand, ensuring precise and accurate results.

Does the Makita HR2630T have a quick release system?

Yes, the Makita HR2630T is equipped with a quick release system. This feature enables users to swiftly and effortlessly change drill bits, optimizing productivity and minimizing downtime during projects.

Is the manual of the Makita HR2630T available in English?

Yes, the manual of the Makita HR2630T is available in English .

Is your question not listed? Ask your question here

No results