View the manual for the Makita HP1640 here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Makita HP1640 or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Makita HP1640.
The Makita HP1640 is a drill machine designed for a variety of drilling applications. With a chuck type of Key, it allows for easy and secure bit changes. The idle speed reaches a maximum of 2800 RPM, providing sufficient power for efficient drilling tasks. This drill machine is equipped with hammer drilling capabilities, making it suitable for use on concrete surfaces. The maximum drilling diameter in concrete is 16 mm, allowing for the creation of large holes. For steel surfaces, the maximum drilling diameter is 13 mm, while for wood surfaces, it can drill up to 30 mm in diameter. Featuring an input power of 680 W, the Makita HP1640 offers a reliable and robust performance. Measuring 72 mm in width, 303 mm in depth, and 222 mm in height, the compact design allows for easy handling and maneuverability in tight spaces. Despite its compact size, it weighs 2000 g, providing stability and control during operation. The drill machine is powered by an AC power source, ensuring a constant supply of energy for consistent performance. With its key chuck type, it offers a secure grip on the drill bits, preventing any slippage during operation. The Makita HP1640 is a durable and efficient tool suitable for professionals and DIY enthusiasts alike.
| Brand | Makita |
| Model | HP1640 | HP1640 |
| Product | drill machine |
| EAN | 0088381096614 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Chuck type | Key |
| Hammer drilling | Yes |
| Idle speed (max) | 2800 RPM |
| Screw diameter (max) | 13 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 16 mm |
| Drilling diameter in wood (max) | 30 mm |
| Input power | 680 W |
| Power source | AC |
| Width | 72 mm |
| Depth | 303 mm |
| Height | 222 mm |
| Weight | 2000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita HP1640 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Makita HP1640 has a weight of 2000 g.
The Makita HP1640 has a height of 222 mm.
The Makita HP1640 has a width of 72 mm.
The Makita HP1640 has a depth of 303 mm.
To attach the drill bit, locate the chuck key and insert it into the chuck. Turn the chuck key clockwise until the jaws are wide open. Insert the drill bit into the chuck and tighten it by turning the chuck key counterclockwise. To detach the drill bit, simply reverse the process.
The Makita HP1640 has a maximum drilling capacity of 16 millimeters in concrete, 30 millimeters in wood, and 13 millimeters in steel. This information is crucial to ensure you don't exceed the drill's capabilities while working with different materials.
The Makita HP1640 features variable speed control. To adjust the speed, locate the speed control dial on the side of the machine. Turn it clockwise to increase the speed and counterclockwise to decrease it. Match the speed to the material you're working with to achieve optimal results.
The depth stop allows you to control the drilling depth. To set it, rotate the depth stop rod near the back of the drill until the desired depth is aligned with the mark on the rod. Once set, the drill will automatically stop when it reaches the set depth, preventing overdrilling.
Regular maintenance and cleaning are essential for optimal performance. After each use, wipe the drill with a clean cloth to remove any dust or debris. Check and clean the ventilation slots to prevent overheating. Additionally, periodically inspect the carbon brushes and replace them if worn out. Proper maintenance prolongs the drill's lifespan.
Yes, the Makita HP1640 has a key chuck. This means that the user will need to use a key to tighten and loosen the drill bits.
The maximum idle speed of the Makita HP1640 is 2800 RPM. This high speed allows for fast and efficient drilling.
The Makita HP1640 can handle a maximum screw diameter of 13 mm. This means it is well-suited for a wide range of screw sizes.
Yes, the Makita HP1640 is capable of hammer drilling. This feature is useful for drilling into tough materials like concrete.
The Makita HP1640 has a maximum drilling diameter of 30 mm in wood. This is a decent size, allowing for various woodworking applications.
Yes, the manual of the Makita HP1640 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Makita and is the answer not in the manual?
Question and answer
Number of questions: 0