Makita EN4951SH manual

Makita EN4951SH
8.4 · 1
PDF manual
 · 196 pages
English
manualMakita EN4951SH

MM4 POLE HEDGE

TRIMMER

EN4951SH

Model EN4951SH is a short shaft petrol pole hedge trimmer

powered by 25.4cc 4-stroke engine, with angle adjustable

head.

TECHNICAL SPECIFICATIONS

Engine 4-stroke
Cubic Capacity 25.4 cc
Blade Length 49 cm
Max Branch Diameter 21.5 mm
Horsepower 1.03 hp
Fuel Tank Capacity 0.6 litres
Power Rating 0.77 kW
Strokes per Minute 4,200 spm
Overall Length 2,050 mm
No Load Speed 10,000 rpm
Cutting RPM 7000 rpm
Net weight 6.6 kg
Noise sound pressure 90.2 dB(A)
Noise sound power 102.2 dB(A)
Noise K factor 1.0 dB(A)
Vibration: Left Handle (Front grip) 8.0 m/sec²
Vibration: Right Handle (Rear grip) 8.0 m/sec²
Vibration K factor 1.4 m/sec²
Link to product - www.makitauk.com

USER BENEFITS

Environmentally friendly and cost saving 25.4cc 4-
Stroke engine. Low noise and clean exhaust emission.
Low running costs
Multi-position engine lubrication system enables the
engine to be inclined to any angle even during
continuous operation.
Angle adjustable hedge trimmer head: 13 angle
settings through 135°
45° tilt-up to 90° tilt-down from the horizontal position
180° foldable for easy transport and storage
Built-in clutch works to stop the blade motion even if
the throttle lever is touched while 180° folding.
Recoil starter with automatic decompression
Diaphragm carburetor
Primer Pump
Compact & Lightweight
Short-shaft provides greater manoeuvrability
2x comfortable hand grips
EN4951SHEN4951SHEN4951SHEN4951SH - MM4 POLE HEDGE TRIMMER
Page 1(2)
www.makitauk.com
5-1-2021

Manual

View the manual for the Makita EN4951SH here, for free. This manual comes under the category hedge trimmers and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Makita EN4951SH or do you need help? Ask your question here

Need help?

Do you have a question about the Makita and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Makita EN4951SH specifications

Below you will find the product specifications and the manual specifications of the Makita EN4951SH.

General
BrandMakita
ModelEN4951SH | EN4951SH
Producthedge trimmer
EAN0088381695046
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Technical details
Blade typeDouble blade
Cutting thickness (max)21.5 mm
Blade size490 mm
Features
Fuel tank capacity0.6 L
Engine displacement25.4 cm³
Weight & dimensions
Width223 mm
Depth2100 mm
Height241 mm
Weight6600 g
Power
Power sourceGasoline
Engine power770 W
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita EN4951SH below.

How do I remove rust from my Makita hedge trimmer?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a hedge trimmer?

The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Makita EN4951SH?

The Makita EN4951SH has a weight of 6600 g.

What is the height of the Makita EN4951SH?

The Makita EN4951SH has a height of 241 mm.

What is the width of the Makita EN4951SH?

The Makita EN4951SH has a width of 223 mm.

What is the depth of the Makita EN4951SH?

The Makita EN4951SH has a depth of 2100 mm.

Is the manual of the Makita EN4951SH available in English?

Yes, the manual of the Makita EN4951SH is available in English .

Is your question not listed? Ask your question here

No results