Makita 9564PCV manual

Makita 9564PCV
5.6 · 1
PDF manual
 · 20 pages
English
manualMakita 9564PCV

2 ENGLISH

SPECIFICATIONS

Model: 9564PC
9564PCV
9565PC
9565PCV
9566PC
9566PCV
Applicable grinding wheel Max. wheel diameter 115 mm 125 mm 150 mm
Max. wheel thickness 7.2 mm 6.4 mm
Applicable cut-o󰀨 wheel Max. wheel diameter 115 mm 125 mm 150 mm
Max. wheel thickness 3.2 mm 3.0 mm
Applicable wire wheel brush Max. wheel diameter 115 mm 125 mm
Max. wheel thickness 20 mm
Spindle thread M14 or 5/8″ (country specic)
Max. spindle length 23 mm
No load speed (n
0
) / Rated speed (n) 12,000 min
-1
10,000 min
-1
Overall length 307 mm
Net weight 2.4 - 3.5 kg 2.5 - 2.9 kg
Safety class
/II
Due to our continuing program of research and development, the specications herein are subject to change

without notice.

Specications may di󰀨er from country to country.

The weight may di󰀨er depending on the attachment(s). The lightest and heaviest combinations, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.
Wear safety glasses.
Always operate with two hands.
Do not use the wheel guard for cut-o󰀨
operations.
DOUBLE INSULATION
Only for EU countries
Due to the presence of hazardous compo-
nents in the equipment, used electrical and
electronic equipment may have a negative
impact on the environment and human
health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and its adaptation to national law,
used electrical and electronic equipment
should be collected separately and
delivered to a separate collection point
for municipal waste, operating in accor-
dance with the environmental protection
regulations.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.

Intended use

The tool is intended for grinding, sanding, wire brush-

ing, hole cutting and cutting of metal and stone materi-

als without the use of water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Manual

View the manual for the Makita 9564PCV here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Makita 9564PCV or do you need help? Ask your question here

Need help?

Do you have a question about the Makita and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Makita 9564PCV specifications

Below you will find the product specifications and the manual specifications of the Makita 9564PCV.

General
BrandMakita
Model9564PCV
Productgrinder
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita 9564PCV below.

Is the manual of the Makita 9564PCV available in English?

Yes, the manual of the Makita 9564PCV is available in English .

Is your question not listed? Ask your question here

No results