View the manual for the Makita 8391D here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Makita 8391D or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Makita 8391D.
| Brand | Makita |
| Model | 8391D |
| Product | not categorized |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita 8391D below.
To switch the lever and change the speed of the Makita 8391D, follow these steps: 1. Ensure that the tool is switched off. 2. Locate the speed change lever on the tool. It is labeled with numbers "1" and "2". 3. Slide the speed change lever to the "2" side for high speed or the "1" side for low speed, depending on your desired speed. 4. Make sure the speed change lever is fully set to the correct position before operating the tool. 5. Use the appropriate speed for your specific job requirements. It is important to note the following precautions: - Always set the speed change lever fully to the correct position. Operating the tool with the lever positioned halfway between the "1" and "2" sides may cause damage to the tool. - Do not use the speed change lever while the tool is running, as it may also cause damage. By following these steps and precautions, you can easily switch the lever and adjust the speed of the Makita 8391D to suit your needs.
To select the action mode on the Makita 8391D, follow these steps: 1. Locate the action mode changing ring on the tool. It is labeled with different modes. 2. To use the tool for rotation only, turn the ring so that the arrow on the tool body points towards the "m" mark on the ring. 3. To use the tool for rotation with hammering, turn the ring so that the arrow points towards the "on" mark on the ring. 4. To use the tool for rotation with clutch, turn the ring so that the arrow points towards the "mark" mark on the ring. 5. Make sure the ring is set correctly to your desired mode before operating the tool. It is important to note the following caution: - Always set the ring correctly to your desired mode. Operating the tool with the ring positioned halfway between the mode marks may cause damage to the tool. By following these steps and precautions, you can easily select the action mode on the Makita 8391D according to your work needs.
When using the speed change lever on the Makita 8391D, it is important to take the following precautions: 1. Ensure that the tool is switched off before making any adjustments. 2. Locate the speed change lever on the tool, which is labeled with numbers "1" and "2". 3. Slide the speed change lever to the "2" side for high speed or the "1" side for low speed, depending on your desired speed. 4. Always set the speed change lever fully to the correct position. Operating the tool with the lever positioned halfway between the "1" and "2" sides may cause damage to the tool. 5. Do not use the speed change lever while the tool is running, as it may also cause damage. 6. Use the appropriate speed for your specific job requirements. 7. Follow the recommended speed settings provided in the manual for different materials and applications. By following these precautions, you can safely and effectively use the speed change lever on the Makita 8391D.
When changing the action mode on the Makita 8391D, it is important to take the following precautions: 1. Ensure that the tool is switched off before making any adjustments. 2. Locate the action mode changing ring on the tool. It is labeled with different modes. 3. To use the tool for rotation only, turn the ring so that the arrow on the tool body points towards the "m" mark on the ring. 4. To use the tool for rotation with hammering, turn the ring so that the arrow points towards the "on" mark on the ring. 5. To use the tool for rotation with clutch, turn the ring so that the arrow points towards the "mark" mark on the ring. 6. Always set the ring correctly to your desired mode mark. Operating the tool with the ring positioned halfway between the mode marks may cause damage to the tool. By following these precautions, you can safely and effectively change the action mode on the Makita 8391D according to your work needs.
Yes, the manual of the Makita 8391D is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Makita and is the answer not in the manual?
Question and answer
Number of questions: 0