Makita 6501 manual

Makita 6501
9.1 · 1
PDF manual
 · 8 pages
English
manualMakita 6501
2
ENGLISH (Original instructions)

SPECIFICATIONS

Model 6501
Steel 6.5 mm
Capacities
Wood 9 mm
No load speed (min
-1
) 4,500
Overall length 206 mm
Net weight 0.9 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5

Symbols

The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE032-1
Intended use
The tool is intended for drilling in wood, metal and
plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG104-2
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 77 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
ENG202-3
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-14
For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
High Speed Drill
Model No./ Type: 6501
are of series production and
Conforms to the following European Directives:
2006/42/EC

Manual

View the manual for the Makita 6501 here, for free. This manual comes under the category screw machines and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Makita 6501 or do you need help? Ask your question here

Need help?

Do you have a question about the Makita and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Makita 6501 specifications

Below you will find the product specifications and the manual specifications of the Makita 6501.

General
BrandMakita
Model6501 | 6501
Productscrew machine
EAN0088381003001
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Features
Chuck typeKey
Hammer drilling-
Performance
Idle speed (max)4500 RPM
Drilling diameter in steel (max)6.5 mm
Drilling diameter in wood (max)9 mm
Power
Cable length2 m
AC input voltage120 V
Input power230 W
Power sourceAC
Technical details
Yes
Weight & dimensions
Weight900 g
Depth206 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita 6501 below.

What is the weight of the Makita 6501?

The Makita 6501 has a weight of 900 g.

How do I remove rust from my Makita screw machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a screw machine?

The amount of sound varies a lot per brand and type of screw machine, it is therefore wise to wear hearing protection to be sure.

What is the depth of the Makita 6501?

The Makita 6501 has a depth of 206 mm.

Is the manual of the Makita 6501 available in English?

Yes, the manual of the Makita 6501 is available in English .

Is your question not listed? Ask your question here

No results