View the manual for the Makita 6501 here, for free. This manual comes under the category screw machines and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Makita 6501 or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Makita 6501.
| Brand | Makita |
| Model | 6501 | 6501 |
| Product | screw machine |
| EAN | 0088381003001 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Chuck type | Key |
| Hammer drilling | - |
| Idle speed (max) | 4500 RPM |
| Drilling diameter in steel (max) | 6.5 mm |
| Drilling diameter in wood (max) | 9 mm |
| Cable length | 2 m |
| AC input voltage | 120 V |
| Input power | 230 W |
| Power source | AC |
| Yes |
| Weight | 900 g |
| Depth | 206 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita 6501 below.
The Makita 6501 has a weight of 900 g.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of screw machine, it is therefore wise to wear hearing protection to be sure.
The Makita 6501 has a depth of 206 mm.
Yes, the manual of the Makita 6501 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Makita and is the answer not in the manual?
Question and answer
Number of questions: 0