View the manual for the Makita 6337D here, for free. This manual comes under the category screw machines and has been rated by 3 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Makita 6337D or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Makita 6337D.
The Makita 6337D is a screw machine designed for use in various applications. It features a compact and ergonomic design, making it easy to handle and operate. The machine is powered by a rechargeable battery, providing cordless convenience for users. Equipped with a powerful motor, the Makita 6337D offers reliable performance and efficiency when driving screws. It has a variable speed control feature, allowing users to adjust the speed based on the task at hand. Additionally, the machine has a forward and reverse function, further enhancing its versatility. The Makita 6337D is constructed with durable materials, ensuring its longevity and resistance to wear and tear. It also has a built-in LED light to illuminate the work area, enabling users to work in low-light conditions with ease. Overall, the Makita 6337D is a practical and reliable screw machine that can be utilized for a variety of projects. Its cordless design and user-friendly features make it a convenient tool for both professionals and DIY enthusiasts.
| Brand | Makita |
| Model | 6337D |
| Product | screw machine |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Makita 6337D below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of screw machine, it is therefore wise to wear hearing protection to be sure.
To properly install or remove a driver bit or drill bit in the Makita 6337D screw machine, follow these steps: 1. Switch off the tool and remove the battery cartridge before starting any work. 2. Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. 3. Place the bit in the chuck as far as it will go. 4. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck. 5. To remove the bit, hold the ring and turn the sleeve counterclockwise. 6. When not in use, store the driver bit in the bit holders. 7. For drilling operations, use wood drills with a guide screw for wood and make an indentation with a center-punch for metal. 8. Always use cutting lubricant when drilling metals and avoid excessive pressure on the tool. 9. Remember to replace carbon brushes regularly and use only identical replacements. 10. For maintenance or repairs, consult Makita Authorized Service Centers.
When drilling in metal with the Makita 6337D screw machine, follow these precautions to prevent slipping of the bit and ensure safety: 1. Make an indentation with a center-punch and hammer at the drilling point to prevent the bit from slipping when starting the hole. 2. Use a cutting lubricant while drilling metal, except for iron and brass which should be drilled dry. 3. Avoid excessive pressure on the tool, as it can damage the bit and decrease performance. 4. Hold the tool firmly when the bit begins to break through the workpiece to handle the force exerted. 5. Use the reversing switch to back out a stuck bit, but ensure to hold the tool firmly to prevent abrupt movement. 6. Secure small workpieces in a vise or hold-down device for stability during drilling. 7. Allow the tool to rest for 15 minutes if the battery cartridge discharges before continuing with a fresh battery.
Yes, the manual of the Makita 6337D is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Makita and is the answer not in the manual?
Question and answer
Number of questions: 0