Magnat Monitor Supreme 200 manual

Magnat Monitor Supreme 200
8.2 · 4
PDF manual
 · 44 pages
English
manualMagnat Monitor Supreme 200
MONITOR SUPREME 2000
MONITOR SUPREME 1000
MONITOR SUPREME 800
MONITOR SUPREME 200
MONITOR SUPREME 100
MONITOR SUPREME CENTER 250
BEDIENUNGSANLEITUNG/GARANTIEURKUNDE
OWNER’S MANUAL/WARRANTY DOCUMENT
MODE D’EMPLOI/CERTIFICAT DE GARANTIE

Manual

View the manual for the Magnat Monitor Supreme 200 here, for free. This manual comes under the category speakers and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Magnat Monitor Supreme 200 or do you need help? Ask your question here

Need help?

Do you have a question about the Magnat and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Magnat Monitor Supreme 200 specifications

Below you will find the product specifications and the manual specifications of the Magnat Monitor Supreme 200.

The Magnat Monitor Supreme 200 is a bookshelf speaker designed to deliver high-quality audio performance. Equipped with a 175 mm woofer and a 25 mm tweeter, it offers a balanced sound experience with a wide range of frequencies. With a power output of 90W RMS and an impedance of 4Ω, this speaker can handle considerable audio levels without distortion. Its sensitivity rating of 91 dB ensures that even subtle details in the audio are reproduced clearly. The Magnat Monitor Supreme 200 features a 2.0 channel audio output, providing stereo sound for an immersive listening experience. Despite its compact size, it is capable of producing a peak music power output of 180W, allowing for dynamic and impactful sound. With a crossover frequency of 3500Hz, this speaker effectively separates the audio signals between the woofer and tweeter to ensure each driver operates within its optimal frequency range. This results in accurate and precise sound reproduction. Measuring 210 x 280 x 355 mm and weighing 6200g, the Magnat Monitor Supreme 200 is compact and lightweight, making it suitable for placement on bookshelves or desktops. However, it does not come with remote control functionality. Constructed with durability in mind, this speaker is made with premium materials to withstand the demands of long-term use. It offers a reliable and consistent audio performance that is sure to enhance any listening experience.

General
BrandMagnat
ModelMonitor Supreme 200 | 144 7022
Productspeaker
EAN4018843470214, 4018843470221, 4018843470238, 4018843470245
LanguageEnglish
FiletypeUser manual (PDF)
Other features
TypeBookshelf
Dimensions (WxDxH)210 x 280 x 355 mm
Loudspeakers
Woofer diameter175 mm
Tweeter diameter25 mm
Audio output channels2.0 channels
Audio
RMS rated power90 W
Impedance4 Ω
Sensitivity91 dB
Peak Music Power Output (PMPO)180 W
Crossover frequency3500 Hz
Frequency range34 - 38000 Hz
Performance
Product colorWalnut
Remotely operatedNo
Weight & dimensions
Weight6200 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Magnat Monitor Supreme 200 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the Magnat Monitor Supreme 200?

The Magnat Monitor Supreme 200 has a weight of 6200 g.

What is the RMS rated power of the Magnat Monitor Supreme 200?

The RMS rated power of the Magnat Monitor Supreme 200 is 90 W. This means that the speaker has a decent power output, allowing for loud and clear audio playback.

How large are the woofers in the Magnat Monitor Supreme 200?

The woofers in the Magnat Monitor Supreme 200 have a diameter of 175 mm. This size ensures a good bass response and enhances the overall audio experience.

What is the sensitivity of the Magnat Monitor Supreme 200?

The sensitivity of the Magnat Monitor Supreme 200 is 91 dB. This indicates that the speaker can deliver loud sound levels with a relatively low input power, making it suitable for various environments.

Does the Magnat Monitor Supreme 200 have a remote control?

No, the Magnat Monitor Supreme 200 does not have a remote control. This means that the user will have to manually adjust settings or volume directly on the speaker.

What are the dimensions of the Magnat Monitor Supreme 200?

The dimensions of the Magnat Monitor Supreme 200 are 210 x 280 x 355 mm (width x depth x height). These compact dimensions make it suitable for bookshelf placement and ensure easy integration into any room setup.

How do I connect the Magnat Monitor Supreme 200 speaker to my amplifier or receiver?

To connect the Magnat Monitor Supreme 200 speaker to your amplifier or receiver, follow these steps: 1. Use a good quality loudspeaker connection cable with a cross-section of at least 2.5 mm² for lengths up to 3 meters, or at least 4 mm² for lengths above 3 meters. You can purchase these cables from an audio dealer. 2. Before connecting or disconnecting the loudspeaker cables, always turn off the amplifier or receiver to prevent any impairment of sound quality. 3. Place the Magnat Monitor Supreme 200 speaker in its planned position and cut the cable to the right length. Ensure that the cables for both channels are exactly the same length. 4. Strip 10-15 mm of insulation from the ends of the cables. Twist the ends and insert them into the terminals of the speaker. Tighten the terminal screws firmly to secure the connection. 5. To ensure proper sound reproduction, it is important to connect the cables in phase. Connect the black negative terminals (-) of the speaker to the negative (-) terminals on the amplifier, and the red positive (+) speaker terminals to the positive (+) amplifier terminals. Some speaker cables have a colored strip or ridge in the insulation to help identify the correct polarity. 6. Double-check all your connections before switching on the system. Ensure that the terminal screws are tight and there are no short circuits caused by stray wire filaments, as this could potentially damage your amplifier. By following these steps, you can successfully connect the Magnat Monitor Supreme 200 speaker to your amplifier or receiver and enjoy high-quality sound reproduction.

What type of loudspeaker connection cables should I use with the Magnat Monitor Supreme 200 speaker?

To ensure optimal performance with the Magnat Monitor Supreme 200 speaker, it is recommended to use high-quality loudspeaker connection cables. Follow these guidelines when selecting the cables: 1. Choose loudspeaker connection cables with a cross-section of at least 2.5 mm² for cable lengths up to 3 meters. For lengths above 3 meters, use cables with a cross-section of at least 4 mm². The cross-section refers to the thickness of the cable, which affects the conductivity and overall sound quality. 2. Look for cables that are specifically designed for audio applications. These cables are typically made of high-quality copper or oxygen-free copper (OFC) conductors, which minimize signal loss and interference. 3. Consider the insulation material of the cables. Opt for cables with insulation that provides good protection against external interference and ensures durability. 4. Pay attention to the connectors on the cables. Ensure that they are compatible with the speaker terminals and the amplifier or receiver connections. Common connector types include banana plugs, spade connectors, and bare wire connections. By selecting high-quality loudspeaker connection cables with the appropriate cross-section, insulation, and connectors, you can optimize the performance of your Magnat Monitor Supreme 200 speaker and enjoy accurate and immersive sound reproduction.

How do I position the Magnat Monitor Supreme 200 speaker for optimal sound experience in stereo mode?

To position the Magnat Monitor Supreme 200 speaker for optimal sound experience in stereo mode, follow these steps: 1. Place the speakers and the listening position to form an equilateral triangle. This means that the left and right speakers should be the same distance from the listening position. This configuration ensures harmonious and natural music reproduction. 2. Maintain a clear line of sight between the loudspeakers and the listening position. Avoid any sound-absorbing or reflecting obstacles that could distort the sound. 3. For Monitor Supreme tower loudspeakers, position them at least 20 cm away from the rear wall and at least 30 cm from the side walls. This prevents excessive emphasis of the bass range. 4. For Monitor Supreme 200 and 100 shelf loudspeakers, aim for a free-standing placement. Keep a distance of at least 10 cm from the sides and rear walls or items. Position the tweeters at ear height for optimal sound projection. 5. If you have Monitor Supreme 2000, 1000, or 800 speakers with spikes, use the supplied spikes to isolate them from the supporting surface. This helps prevent unpleasant resonance effects. Screw the spikes into the threaded bushes on the bottom of the speaker. By following these steps, you can position the Magnat Monitor Supreme 200 speaker correctly in stereo mode and achieve an optimal sound experience.

Where should I place the Magnat Monitor Supreme 200 speaker as a front or rear loudspeaker?

To place the Magnat Monitor Supreme 200 speaker as a front or rear loudspeaker, follow these steps: 1. For front loudspeaker placement, position the Magnat Monitor Supreme 200 speakers at ear height on the left and right sides of your listening area. This ensures optimal sound projection and imaging. 2. Maintain a distance of at least 20 cm from the rear wall to prevent excessive bass emphasis and allow for proper sound dispersion. 3. For rear loudspeaker placement, position the Magnat Monitor Supreme 200 speakers at ear height or slightly above on the left and right sides of your listening area. This creates an immersive surround sound experience. 4. Aim to maintain a balanced sound field by positioning the rear speakers symmetrically with respect to the listening position. 5. Consider the distance from the television or screen when placing the front loudspeakers. Ensure that the speakers are not obstructing the view or causing any interference. By following these steps, you can properly position the Magnat Monitor Supreme 200 speaker as a front or rear loudspeaker and enhance your audio experience in both stereo and surround sound setups.

What are the specifications of other models in the Monitor Supreme series, such as Monitor Supreme 2000, Monitor Supreme 1000, Monitor Supreme 800, Monitor Supreme 100, and Monitor Supreme Center 250?

The specifications of other models in the Magnat Monitor Supreme series are as follows: 1. Magnat Monitor Supreme 800: - Full Name: Magnat Monitor Supreme 800 - EAN Codes: 4018843470832, 4018843708096 2. Magnat Monitor Supreme 102: - Full Name: Magnat Monitor Supreme 102 - EAN Code: 4018843480138 3. Magnat Monitor Supreme 202: - Full Name: Magnat Monitor Supreme 202 - EAN Code: 4018843480220 4. Magnat Monitor Supreme 802: - Full Name: Magnat Monitor Supreme 802 - EAN Code: 4018843808390 5. Magnat Monitor Supreme 100: - Full Name: Magnat Monitor Supreme 100 - EAN Codes: 4018843470139, 4018843471037, 4018843701394 Please note that the specifications provided are specific to each model in the Magnat Monitor Supreme series.

Is the manual of the Magnat Monitor Supreme 200 available in English?

Yes, the manual of the Magnat Monitor Supreme 200 is available in English .

Is your question not listed? Ask your question here

No results