Luxul XWR-1200 manual

Luxul XWR-1200
7.5 · 1
PDF manual
 · 8 pages
manualLuxul XWR-1200
Fo ld Fo ld Fo ld



Dual-Band AC1200 Gigabit Router
Dual-Band Wireless AC1200 Gigabit Router
Dual Band Antennas (2)
Ethernet Cable
Power Adapter


Physical Installation
The XWR-1200 Wireless Router is designed for simple and ecient installation.
For horizontal installation, install the rubber feet and position the XWR-1200
on a desk or other horizontal surface with adequate room around the device
for ventilation. For wall or ceiling mounting, simply follow the directions on the
included mounting pattern and use the mounting keyholes on the XWR-1200.


Connecting Antennas, Ethernet and Power
Antennas: Ensure all dual-band antennas are installed on the router.
INTERNET Connection: Connect the Ethernet cable from the modem/
router equipment provided by your Internet Service Provider (ISP) to the
black INTERNET port of the XWR-1200.
AC Power: Connect the included AC Adapter to the XWR-1200 first and then
to the AC outlet.


Preparing for Access
IP Addressing
The XWR-1200 default LAN IP address is The DHCP server on the
XWR-1200 is configured by default to create a 192.168.0.x network.
Both the default LAN IP address and subnet scheme can be changed. However
for hassle-free plug-and-play installation of other Luxul hardware, we recom-
mend you use the default IP address if possible.
If your client device is set to obtain an address automatically, no further config-
uration is required and you can skip to the next step, Access and Setup.
If your computer or device isnt set to obtain an IP address automatically,
you’ll need to set a temporary static IP address on that device. Set the IP
address of your computer to an address in the 192.168.0.X range, then
set the Gateway/Router address to (the default IP address of
the XWR-1200).
n NOTE: Visit to learn more about
changing your computer’s IP address and getting connected.


Access and Setup
Getting Connected
Connecting Via an Ethernet Device: Use an Ethernet cable to connect
your computer to one of the green XWR-1200 LAN ports. Ethernet is the
preferred method of connection.
Connecting Via a Wireless Device: Connect a wireless client device
to one of the XWR-1200 default wireless networks (Luxul1200 or
Luxul12005G). Both Wireless networks will run in Open security mode, so
a passphrase will not be required until wireless security is configured.
Open a web browser, enter, then log in to the router using the
default user name and password and proceed with configuration:
Default IP:
Username: admin
Password: admin
n NOTE: If another device on your network shares the
address, you’ll need to reassign that device a dierent IP
address to configure the XWR-1200.
n NOTE: Only devices that support the 5GHz frequency will see the
default Luxul12005G wireless network.
P: 801-822-5450
Technical Support
P: 801-822-5450 Option 3
LUX-QIG-XWR-1200-v8 04101704
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.

View the manual for the Luxul XWR-1200 here, for free. This manual comes under the category Routers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Luxul XWR-1200 or do you need help? Ask your question here

Need help?

Do you have a question about the Luxul and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Luxul owners to provide you with a good answer.

Number of questions: 0

XWR-1200 | XWR-1200-E
User manual (PDF)
WAN connection
Ethernet WAN
SIM card slot-
3G/4G USB modem compatibility-
Wireless LAN features
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1200 Mbit/s
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)866 Mbit/s
Ethernet LAN
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
SSID-based VLAN assignment
Number of guest networks (2.4 GHz)3
Number of guest networks (5 GHz)3
VPN tunnels quantity1
Port forwarding
Antenna designExternal
Transmit power30 dBmW
Detachable antenna(s)
Receive power1000 dBmW
Antennas quantity2
Power source typeAC
Output current2 A
Output voltage12 V
Power supply18 W
Product typeTabletop router
Product colourBlack
Indication light
LED indicatorsLAN, Power, System, USB, WAN
Operational conditions
Operating temperature (T-T)32 - 122 °C
Weight & dimensions
Width142 mm
Height38 mm
Weight450 g
Sustainability certificatesCE, RoHS
Management features
Number of data streams2x2
Reset button
Quality of Service (QoS) support
Mobile network
Ports & interfaces
Ethernet LAN (RJ-45) ports-
USB port
USB 2.0 ports quantity1
DC-in jack
Security algorithmsWPA, WPA-PSK, WPA2, WPA2-PSK
MAC address filtering
Guest access
DHCP client
DHCP server
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Luxul XWR-1200 below.

Is your question not listed? Ask your question here

No results