Lucasey LC200C9F manual

Lucasey LC200C9F
  • Number of pages: 1
  • Filetype: PDF
Hex Head Bolt
Installation &
Pivot Tension
200mm Mounting Plate
Monitor Attaching Screws & Washers
Countersunk Wood Lag Screws
Apply Thread Locking Agent
Round Flange
Pivot Tension
Pivot Tension
Tilt Tension Adjustment
T#2093 & 2214
LC200CFA_Ins (7/12) ©2012 Lucasey Manufacturing Corporation, Oakland, California
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
8 ...
8 ...
1 ...
#14 x 2" Countersunk Tapping Screws (06-104122200)
Black Plastic Screw Caps (09-05975022)
1/2ml Tube HM128 Thread Locking Agent (09-01100025)
Hardware Kit
1. Remove the Hex Head Bolt from the LC200CFA
Pivot Point behind the 200mm Mounting Plate.
2. Attach the 200mm Mounting Plate to the monitor
with screws appropriate for your monitor. The correct
mounting screw size are specified by the monitor
manufacturer. An assortment of monitor attaching
hardware is available for standard monitor threaded
3. Attach the Round Flange to the counter top or
wood ceiling with the provided Countersunk
Lag Screws. If mounting to concrete, steel beams,
or through bolting, hardware kits can be ordered
4. Apply two drops of thread locking agent to the
LC200CFA pipe threads and thread pipe into the
Round Flange. Make sure the pipe is facing in the
direction desired once tight.
5. Lift the monitor with attached 200mm Mounting
Plate to the LC200CFA Pivot Point. Replace the
Hex Head Bolt removed in step 1 and tighten the
pivot point Bolt and Nut to the desired tension.
6. Check all three pivot points for the appropriate
tension to make the arms move in and out as
7. Adjust the monitor tilt tension.


Installation Hardware Kit (03-50400456)
6 ...
6 ...
6 ...
6 ...
6 ...
6 ...
4mm x 25mm Set Screws
5mm x 30mm Set Screws
6mm x 30mm Set Screws
4mm x 12mm Phillips Screws
5mm x 12mm Phillips Screws
6mm x 12mm Phillips Screws
12 ...
12 ...
12 ...
36 ...
18 ...
4mm Hex Nuts
5mm Hex Nuts
6mm Hex Nuts
5mm Flat Washers
1/4" Flat Washers
Lucasey LC200C9F

Need help?

Number of questions: 0

Do you have a question about the Lucasey LC200C9F or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Lucasey LC200C9F owners to properly answer your question.

View the manual for the Lucasey LC200C9F here, for free. This manual comes under the category Flat panel support and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Lucasey LC200C9F or do you need help? Ask your question here

Lucasey LC200C9F specifications

Brand Lucasey
Model LC200C9F
Product Flat panel support
Language English
Filetype PDF
Panel mounting interface 100 x 100,200 x 100,200 x 200 mm
Mounting type Ceiling
Maximum weight capacity 15.9 kg
Number of displays supported 1
Minimum VESA mount 100 x 100 mm
Maximum VESA mount 200 x 200 mm
Weight & dimensions
Weight 5700 g
Packaging data
Package weight 6400 g
Product colour Black
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Lucasey LC200C9F.

Is your question not listed? Ask your question here