Lorus Z016 manual

Lorus Z016
9.7 · 1
PDF manual
 · 2 pages
English
manualLorus Z016
CHARACTERISTICS
1. Digital time displays: Hour, Minute, Second,
Month, Date and day of the week.
2. Daily alarm: The alarm can be set to sound at
the designated time on a 24-hour basis.
3. Chime: The chime can be set to sound every
hour on the hour with a single beep.
4. Stopwatch: The stopwatch can measure up
to 23 hours 59 minutes and 59 seconds in
1/100-second increments for the first first 39
minutes and 59. 99 seconds, and in 1-second
increments thereafter. Lap time measurement
is available.
5. Illuminating light: The built-in electro-
luminescent (EL) backlight illuminates the
display for easy viewing in darkness.
DISPLAY AND BUTTON OPERATION
HOW TO SET NORMAL TIME
HOW TO SET ALARM TIME
1. From NORMAL TIME display, press and hold But-
ton S3 for 3 seconds to show the ALARM TIME
display.
2. Press Button S3 again to set the time and cal-
endar. The second digits start flashing.
3. Press Button S2 to set the second digits to “00.“
* When the second digits count any number
from 30” to 59, one minute is added.
4. Press Button S1 to move on to minutes setting.
The minute digits start flashing.
* Selection of the digits to be adjusted (flashing)
is made in the order below by pressing Button
S1 and then pressing Button S2 to be set.
* One digit (flashing) is increased with each
pressing of Button S2. To move the digits quick-
ly, keep the Button pressed.
5. After all adjustments are completed, press
But-
ton
S3 to return to the NORMAL TIME display.
NREZ016
8-2011
CAL. Z016 (R23 SERIES)
HOW TO DISPLAY MONTH/DATE
1. From NORMAL TIME display, press and hold But-
ton S3 for 3 seconds to show the ALARM TIME
display. The hour digits start flashing.
2. Press Button S2 to set hour digits.
3. Press Button S1 to move on to minutes setting.
4. Press Button S2 to set minute digits setting.
5. After all settings are completed, press Button
S3 to return to the NORMAL TIME display.
HOW TO SWITCH 12-HOUR/24-HOUR
FORMAT
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
NORMAL TIME
S2
PRESS
AND
HOLD
S2
S1
How to stop the alarm while sounding
The alarm sounds for 20 seconds at the designat-
ed time. To stop it manually while sounding, press
Button S2.
HOURS
DAY OF
THE WEEK
CHIME
SIGNAL
MINUTES SECONDS
ALARM
SIGNAL
MONTH/DATE
NORMAL TIME
MINUTES
SETTING
SECONDS
SETTING
Engagement/Disengagement of ALARM &
CHIME
* Press and hold Button S2, and then press But-
ton S1, the ALARM and CHIME can be en-
gaged or disengaged in the order below.
* The ALARM signal and/or CHIME signal appear
or disappear on the display accordingly.
1. Press and hold Button S1 or S2. Then press But-
ton S3 to switch the display.
* The time display format in either 12-hour indi-
cation or in 24-hour indication can be selected
alternately.
* Under the 12-hour indication format, "P" mark
appears in the afternoon, but no AM mark ap-
pears in the morning. Under the 24-hour indi-
cation format, no mark appears on the display.
S1
S2
S3
S4
AFTER-
NOON
S3
ALARM
S2
PRESS
PRESS
S1
S3
PRESS
S2
PRESS
PRESS
S1
HOURS
SETTING
S2
PRESS
PRESS
S1
MONTH
SETTING
S2
PRESS
DATE
SETTING
S2
PRESS
DAY OF WEEK
SETTING
S2
PRESS
S1
S2
12 HOUR
S3
24 HOUR
PRESS AND HOLD
S1
S2
OR
S3
PRESS
1. From NORMAL TIME display, press and hold But-
ton S1 to show the MONTH/DATE display.
2. While keeping Button S1 pressed, press Button
S2 to switch to the DATE/MONTH display.
3. Press Button S2 again to switch back to the
MONTH/DATE display.
* The display format in either DATE/MONTH in-
dication or in MONTH/DATE indication can be
selected alternately by pressing Button S2.
PRESS AND
HOLD
S1
S2
S1
NORMAL TIME
DATE/MONTH
S2
S2
ALARM MODE
HOURS
SETTING
S2
PRESS
PRESS
S1
S3
PRESS
MINUTES
SETTING
S2
PRESS
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
ALARM
ALARM &
CHIME ON
CHIME
SIGNAL
ALARM
SIGNAL
PRESS
S1
CHIME OFF
ALARM & CHIME
OFF
CHIME
OFF
PRESS AND
HOLD
S2
PRESS
S1
ALARM
OFF
PRESS AND
HOLD
S2
PRESS
S1
CHIME ON
CHIME
ON
PRESS AND
HOLD
S2
PRESS
S1
CHIME ON
ALARM ON
AFTER-
NOON
PRESS
PRESS
Start/Stop
Set
Mode
Light
* Press and hold Button S3 for 3 seconds to show
the ALARM TIME.
* Press and hold Button S1 to show the MONTH/
DATE or DATE/MONTH. Release Button S1 to re-
turn to the NORMAL TIME display.
* Press Button S3 at any time to return to the NOR-
MAL TIME display.
MODE
LIGHT
ST/STP
RESET
P
PRESS
AND
HOLD
MODE
LIGHT
ST/STP
RESET
P
S1
PRESS
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
PRESS
S1
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
S3
S2
S1
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
NORMAL TIME
S3
S3
PRESS
PRESS
AND
HOLD
S3
S2
S1
MODE
LIGHT
ST/STP
RESET
P
MODE
LIGHT
ST/STP
RESET
P
*
In NORMAL TIME display, press Button S4 to
il
luminate the display for approximately 3 sec-
onds.
PRESS
HOW TO USE EL BACKLIGHT
Note:
1. If your watch is not equipped with Button S4,
this function is not available.
2. The backlight of the watch employs an elec-
tro-luminescent (EL) light, which tends to lose
illuminating power after very long use.
3. The illumination provided by backlight may be
hard to see when viewed under direct sunlight.
* When the illuminating light becomes dim, re-
place the batteries with new ones.
MODE
LIGHT
ST/STP
RESET
P
S4

Manual

View the manual for the Lorus Z016 here, for free. This manual comes under the category Watches and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Lorus Z016 or do you need help? Ask your question here

Need help?

Do you have a question about the Lorus Z016 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Lorus Z016 owners to provide you with a good answer.

Number of questions: 0

Lorus Z016 specifications

Below you will find the product specifications and the manual specifications of the Lorus Z016.

General
Brand Lorus
Model Z016
Product Watch
Language English
Filetype User manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Lorus Z016 below.

Is your question not listed? Ask your question here

No results