Lorus NX04 manual

Lorus NX04
(1)
  • Number of pages: 2
  • Filetype: PDF
I

NSTRUCTION

M

ANUAL

CAL. NX04 (RD9 SERIES)
NRENX04
05-00
CHARACTERISTICS
1. Time/calendar display:
Analogue display: Hour, minutes and
seconds.
Digital display: Hour, minutes, seconds,
date and day of the week.
Fully automatic calendar: Calendar
adjusts automatically for odd and even months
including February of leap years from the
year 2000 to the end of 2050.
Time indication: Changeover between
12- and 24-hour indications is possible.
2. World time: The time of 27 cities in different
time zones throughout the world can be
displayed together with the time difference
between the selected city and your area.
Daylight saving time setting
3. Stopwatch: Measures up to 23 hours, 59
minutes and 59 seconds in 1/100 second
increments for the first hour and in 1-second
increments thereafter.
4. Regular alarm: The regular alarm can be
set to ring on a 24-hour basis.
5. Single-time alarm: The single-time alarm
can be set to ring only once at the designated
time. As it rings, it is automatically disengaged.
6. Demonstration function: Each mode is
displayed for 2 seconds in order.
7. Illuminating light: The light evenly illuminates
the display for easy viewing in the dark.
CROWN/BUTTONS AND DISPLAYS
Hour Minutes
BC
D
A
Seconds
Crown
Second
hand
Date
Day
Minute
hand
Hour
hand
WORLD TIME
mode
TIME/CALENDAR
mode
A
A
A
By pressing button “C” in the TIME/CALENDAR
mode, the SINGLE-TIME ALARM mode is shown.
With each press of button “D” in the TIME/
CALENDAR mode, the display changes over in
the following order.
HOW TO SET THE TIME/CALENDAR
Before setting the analogue time, be sure to
set the digital time.
DIGITAL TIME/CALENDAR SETTING
Minutes
1. Press button “A” to show the TIME/CALENDAR
mode.
2. Press button “A” for 2 to 3 seconds to show
the TIME/CALENDAR SETTING display.
* The world map and a city mark appear,
and the part of the map representing the
city flashes.
Once the time/calendar of your area is set in
the TIME/CALENDAR mode, the times of
the 27 cities covered in the WORLD TIME
mode will be set automatically.
C
B
A
D
Date
Day
Hour Seconds
City mark
Note: If the watch is left untouched in the
WORLD TIME mode, it will automati-
cally return to the TIME/CALENDAR
mode in 1 to 2 minutes.
TIME/CALENDAR
mode
SINGLE-TIME
ALARM mode
C
REGULAR ALARM
mode
STOPWATCH
mode
A
D
Time/calendar
display
Calendar
display
Blank display
D
D
The selection of the mode can be made in the
following order with each press of button “A”.
4. Press button “D” to set the flashing digits/
segments.
* Before setting the time/calendar, be sure
to select the city representing your area.
(For the city marks and cities they represent,
see “Time differences”)
* One digit is advanced with each press of
button “D”. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “D” pressed.
5. After all the adjustments are completed,
press button “A” to return to the TIME/
CALENDAR mode.
Seconds setting
When the seconds digits are flashing, press
button “D” in accordance with a time signal.
The seconds are reset to “00” and start immediately.
When the seconds count any number from
“30” to “59” and button “D” is pressed, one
minute is added and the seconds are immediately
reset to “00”.
3. Selection of the digits/segments to be adjusted
(flashing) is made in the following order by
pressing button “C”.
12-/24-hour indication setting
Changeover between 12- and 24-hour indications
is made alternately with each press of button
“D”.
Notes:
1. When setting the hour digits in the 12-hour
indication, check that AM/PM is properly
set. Only “PM” mark is displayed and there
is no indication for the AM setting. In the
24-hour indication, “24” is displayed.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the TIME/
CALENDAR SETTING display with the digits/
segments flashing, it will automatically return
to the TIME/CALENDAR mode in 1 to 2
minutes.
ANALOGUE TIME SETTING
City Seconds
→→
Hour
Year
12-/24-hour
indication
Date
Month
Minutes
Hour
hand
Crown
a b
Second hand
a : Normal position
b : Extended position
Minute
hand
1. Pull out the crown when the second hand is
at the 12 o’clock position.
2. Turn the crown to set the hour and minute
hands to the time shown in the digital display.
* When setting the minute hand, advance it 4
to 5 minutes ahead of the desired time and
then turn it back to the exact minute.
3. Push the crown back in to the normal position
when the second digits count “00” in the
digital display.
A convenient way of using the TIME/
CALENDAR mode
When you travel around different time zones,
the time and calendar of the place you visit
can easily be shown in the TIME/CALENDAR
mode.
1. Press button “A” for 2 to 3 seconds in the
TIME/CALENDAR mode to show the TIME/
CALENDAR SETTING display.
2. Press “D” repeatedly to select the city representing
the place you are visiting.
3. Press button “A” to return to the TIME/
CALENDAR mode, and then, adjust the hands
to the digital time.
HOW TO USE THE WORLD TIME
The times of 27 cities in different time zones
throughout the world can be displayed together
with the time difference between the selected
city and your area.
• Daylight saving time can be set for each
city.
Note: To display the times of the cities cov-
ered in the WORLD TIME mode prop-
erly, it is necessary to select the city
representing your area and set the cor-
rect time in the TIME/CALENDAR mode.
(See “ HOW TO SET THE TIME/CAL-
ENDAR”)
C
City mark
B
DA
Daylight saving
time mark
Time
difference
Selected
area
(flashing)
Time of the selected area
1. Press button “A” to show the WORLD TIME
mode.
2. Press button “C” or “D” to select the desired
city.
* With each press of button “C” and “D”, the
flashing segments of the map move rightward
and leftward, respectively.
* If a selected time zone has no city mark
set for the watch, “– – – – – –” will be
displayed in place of a city mark.
Displaying the daylight saving time
1. Press button “C” or “D” to select the desired
city.
2. Press button “A” for 2 to 3 seconds to show
the DAYLIGHT SAVING TIME SETTING display.
* A flashing “DST” mark appears.
3. With each press of button “D”, the standard
time and daylight saving time of the selected
city are alternately shown.
4. Press button “A” to return to the WORLD
TIME mode.
Notes:
1. When the daylight saving time is set for the
city selected in the TIME/CALENDAR mode,
the current time is advanced by one hour.
2. If the watch is left untouched in the DAYLIGHT
SAVING TIME SETTING display with the
daylight saving time mark flashing, it will
automatically return to the WORLD TIME
mode in 1 to 2 minutes.
Time differences
UTC = coordinated universal time
City
mark
City
name
Honolulu
Anchorage
Los Angeles
Denver
Chicago
New York
Caracas
Rio de Janeiro
London
Paris
Cairo
Jerusalem
Jeddah
Tehran
Dubai
Kabul
Karachi
Delhi
Dhaka
Yangon
Bangkok
Hong Kong
Tokyo
Adelaide
Sydney
Nouméa
Wellington
UTC ± (hours)
[standard time]
UTC ± (hours)
daylight
saving time
[
]
–11:00
–10:00
–09:00
–08:00
–07:00
–06:00
–05:00
–04:00
–03:00
–02:00
–01:00
+00:00
+00:00
+01:00
+02:00
+02:00
+03:00
+03:30
+04:00
+04:30
+05:00
+05:30
+06:00
+06:30
+07:00
+08:00
+09:00
+09:30
+10:00
+11:00
+12:00
–10:00
–09:00
–08:00
–07:00
–06:00
–05:00
–04:00
–03:00
–02:00
–01:00
+00:00
+01:00
+02:00
+03:00
+03:00
+04:00
+04:30
+05:00
+05:30
+06:00
+06:30
+07:00
+07:30
+08:00
+09:00
+10:00
+10:30
+11:00
+12:00
+13:00
* For the time zones with “*” mark in the table
above, “– – – – – –” will be displayed in place
of a city mark.
(–11)*
HNL
ANC
LAX
DEN
CHI
NYC
CCS
RIO
(–2)*
(–1)*
UTC
LON
PAR
CAI
JRS
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
HKG
TYO
ADL
SYD
NOU
WLG
Lorus NX04

Need help?

Number of questions: 0

Do you have a question about the Lorus NX04 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Lorus NX04 owners to properly answer your question.

View the manual for the Lorus NX04 here, for free. This manual comes under the category Watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Lorus NX04 or do you need help? Ask your question here

Lorus NX04 specifications

General
Brand Lorus
Model NX04
Product Watch
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Lorus NX04.

Is your question not listed? Ask your question here