Linksys LAPAC1750C manual

Linksys LAPAC1750C
9.5 · 1
PDF manual
 · 138 pages
English
manualLinksys LAPAC1750C
92
Status
DisabledCluster function is disabled.
ActiveCluster function is enabled and master is active.
Active (Backup Master)Cluster function is enabled and backup master
is active.
Inactive (Cannot reach the master)Cluster function is enabled but it's
inactive because device cannot reach the master.
Member Number
Number of the members active in the cluster. If an access point joins the
cluster but is powered off or cannot reach the master, it is not counted.
Location (Optional)
Where the access point is physically located; for example, Reception.
Length is from 0 to 32 bytes.
Cluster Name
Name of the cluster for the LAP device to join; for example, “lab cluster”.
All access points with the same cluster name belong to the same
cluster. Length of this value is from 4 to 32 bytes and special
characters are allowed. This is a mandatory field if the cluster function
is turned on.
Backup Master
When an access point works as a cluster slave, it can be enabled as a
backup master. When master gets offline, it will take the role of master.
When the backup master begins to work, it will send advertisements
and slaves will send keep-alive and report sessions to it. When
shareable settings are modified in it, it will share them to all slaves.
When master gets online again, this backup master AP will stop the
master function and let original master AP take over master role.

Manual

View the manual for the Linksys LAPAC1750C here, for free. This manual comes under the category access points and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Linksys LAPAC1750C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Linksys and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Linksys LAPAC1750C specifications

Below you will find the product specifications and the manual specifications of the Linksys LAPAC1750C.

The Linksys LAPAC1750C is an access point that provides wireless connectivity for multiple devices within a network. It operates on both the 2.4GHz and 5GHz bands, offering speeds of up to 450 Mbps and 1300 Mbps respectively. The access point is suitable for small to medium-sized businesses or homes with high network traffic. Equipped with MU-MIMO technology, the LAPAC1750C can handle multiple users simultaneously, improving overall network efficiency. It also features beamforming technology, which helps to focus signal strength towards connected devices for a more stable connection. With its sleek design, the LAPAC1750C can be easily mounted on walls or ceilings to optimize wireless coverage. It also comes with Power over Ethernet (PoE) support, allowing for flexible placement without the need for additional power outlets. Overall, the Linksys LAPAC1750C is a reliable and high-performance access point that can enhance the connectivity and productivity of any network.

General
BrandLinksys
ModelLAPAC1750C | LAPAC1750C
Productaccess point
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Linksys LAPAC1750C below.

Is the manual of the Linksys LAPAC1750C available in English?

Yes, the manual of the Linksys LAPAC1750C is available in English .

Is your question not listed? Ask your question here

No results