Linksys LAPAC1750C manual

Linksys LAPAC1750C
9.5 · 1
PDF manual
 · 138 pages
English
manualLinksys LAPAC1750C
48
Wireless
Mode
Select the desired option for radio 1:
G only - allow connection by 802.11G wireless stations only.
N only - allow connection by 802.11N wireless stations only.
B/G-Mixed - allow connection by 802.11B and G wireless
stations only.
B/G/N-Mixed (Default) - allow connections by 802.11N,
802.11B and 802.11G wireless stations.
Select the desired option for radio 2:
N/A-Mixed - allow connection by 802.11A and N wireless
stations only.
N only - allow connection by 802.11N wireless stations only.
AC only - allow connection by 802.11AC wireless stations
only.
A/N/AC-Mixed - allow connection by 802.11A, 802.11N and
802.11AC wireless stations.
Wireless
Channel
Select wireless channel of the radio.
If Auto is selected, the access point will select the best
available channel when device boots up.
If you experience lost connections and/or slow data
transfers,
experiment with manually setting different channels to see
which is the best.
SSID Settings
SSID Name
Enter the desired SSID Name. Each SSID must have a unique
name. The name includes 1 to 32 characters
Broadcast
Enable or disable the broadcast of the SSID.
When the access point does not broadcast its SSID, the
network name is not shown in the list of available networks on
a client station. Instead, you must enter the exact network
name manually into the wireless connection utility on the
client so that it can connect.
Isolation
Enable or disable isolation among clients of the SSID. If
enabled, wireless clients cannot communicate with others in
the same SSID.
It’s disabled by default.

Manual

View the manual for the Linksys LAPAC1750C here, for free. This manual comes under the category access points and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Linksys LAPAC1750C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Linksys and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Linksys LAPAC1750C specifications

Below you will find the product specifications and the manual specifications of the Linksys LAPAC1750C.

The Linksys LAPAC1750C is an access point that provides wireless connectivity for multiple devices within a network. It operates on both the 2.4GHz and 5GHz bands, offering speeds of up to 450 Mbps and 1300 Mbps respectively. The access point is suitable for small to medium-sized businesses or homes with high network traffic. Equipped with MU-MIMO technology, the LAPAC1750C can handle multiple users simultaneously, improving overall network efficiency. It also features beamforming technology, which helps to focus signal strength towards connected devices for a more stable connection. With its sleek design, the LAPAC1750C can be easily mounted on walls or ceilings to optimize wireless coverage. It also comes with Power over Ethernet (PoE) support, allowing for flexible placement without the need for additional power outlets. Overall, the Linksys LAPAC1750C is a reliable and high-performance access point that can enhance the connectivity and productivity of any network.

General
BrandLinksys
ModelLAPAC1750C | LAPAC1750C
Productaccess point
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Linksys LAPAC1750C below.

Is the manual of the Linksys LAPAC1750C available in English?

Yes, the manual of the Linksys LAPAC1750C is available in English .

Is your question not listed? Ask your question here

No results