Linksys LAPAC1750C manual

Linksys LAPAC1750C
9.5 · 1
PDF manual
 · 138 pages
English
manualLinksys LAPAC1750C
45
Duplex Mode
Select the duplex mode of the ethernet port. Available only when
Auto Negotiation is disabled. The option can be Half or Full (default).
Operational
Duplex Mode
Displays the current duplex mode of the ethernet port.
Flow Control
Enable or disable flow control of the ethernet port.
802.1x Supplicant
802.1x
Supplicant
Enable if your network requires this access point to use 802.1X
authentication in order to operate.
Authentication
This feature supports following two kinds of authentication:
Authentication via MAC Address
Select this if you want to use MAC Address for authentication.
The access point uses lowercase MAC address for Name and
Password, like xxxxxxxxxxxx.
Authentication via Name and Password
Select this if you want to use name and password for
authentication.
Name - Enter the login name. The name includes 1 to 63
characters. Special characters are allowed.
Password - Enter the desired login password. The password
includes 4 to 63 characters. Special characters are allowed.
Discovery Settings
Bonjour
Enable if administrator wants the access point to be discovered by
Bonjour enabled devices automatically. If VLAN is enabled, the
discovery packets will be sent out via management VLAN only. The
access point supports http and https services.
LLDP
Enable if administrator wants the access point to be discovered by
switch by LLDP protocol. Information such as product name, device
name, firmware version, IP address, MAC address and so on will be
advertised.
LLDP-MED
Enable if administrator wants the access point to be discovered by
switch by LLDP-MED protocol. Information such as product name,
device name, firmware version, IP address, MAC address and so on
will be advertised.

Manual

View the manual for the Linksys LAPAC1750C here, for free. This manual comes under the category access points and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Linksys LAPAC1750C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Linksys and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Linksys LAPAC1750C specifications

Below you will find the product specifications and the manual specifications of the Linksys LAPAC1750C.

The Linksys LAPAC1750C is an access point that provides wireless connectivity for multiple devices within a network. It operates on both the 2.4GHz and 5GHz bands, offering speeds of up to 450 Mbps and 1300 Mbps respectively. The access point is suitable for small to medium-sized businesses or homes with high network traffic. Equipped with MU-MIMO technology, the LAPAC1750C can handle multiple users simultaneously, improving overall network efficiency. It also features beamforming technology, which helps to focus signal strength towards connected devices for a more stable connection. With its sleek design, the LAPAC1750C can be easily mounted on walls or ceilings to optimize wireless coverage. It also comes with Power over Ethernet (PoE) support, allowing for flexible placement without the need for additional power outlets. Overall, the Linksys LAPAC1750C is a reliable and high-performance access point that can enhance the connectivity and productivity of any network.

General
BrandLinksys
ModelLAPAC1750C | LAPAC1750C
Productaccess point
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Linksys LAPAC1750C below.

Is the manual of the Linksys LAPAC1750C available in English?

Yes, the manual of the Linksys LAPAC1750C is available in English .

Is your question not listed? Ask your question here

No results