Linksys LAPAC1750C manual

Linksys LAPAC1750C
9.5 · 1
PDF manual
 · 138 pages
English
manualLinksys LAPAC1750C
43
Untagged
VLAN
Enables or disables VLAN tagging. If enabled (default), traffic from the
LAN port is untagged when the following conditions are met: 1) VLAN
ID is equal to Untagged VLAN ID and 2) untagged traffic can be
accepted by LAN port. If disabled, traffic from the LAN port is always
tagged and only tagged traffic can be accepted from LAN port.
By default all traffic on the access point uses VLAN 1, the default
untagged VLAN. All traffic will be untagged until you disable the
untagged VLAN, change the untagged traffic VLAN ID, or change the
VLAN ID for a SSID.
Untagged
VLAN ID
Specifies a number between 1 and 4094 for the untagged VLAN ID.
The default is 1. Traffic on the VLAN that you specify in this field is
not be tagged with a VLAN ID when forwarded to the network.
Untagged VLAN ID field is active only when untagged VLAN is
enabled.
VLAN 1 is the default for both untagged VLAN and management
VLAN.
Management
VLAN
The VLAN associated with the IP address you use to connect to the
access point. Provide a number between 1 and 4094 for the
Management VLAN ID. The default is 1.
IPv4/v6
IP Settings
Select Automatic Configuration or Static IP Address.
IP Address
Enter an unused IP address from the address range used on your LAN.
Subnet Mask
Enter the subnet mask for the IP address above.
Default
Gateway
Enter the gateway for the IP address above.
Primary DNS
Enter the DNS address.
Secondary
DNS
Optional. If entered, this DNS will be used if the Primary DNS does not
respond.

Manual

View the manual for the Linksys LAPAC1750C here, for free. This manual comes under the category access points and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Linksys LAPAC1750C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Linksys and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Linksys LAPAC1750C specifications

Below you will find the product specifications and the manual specifications of the Linksys LAPAC1750C.

The Linksys LAPAC1750C is an access point that provides wireless connectivity for multiple devices within a network. It operates on both the 2.4GHz and 5GHz bands, offering speeds of up to 450 Mbps and 1300 Mbps respectively. The access point is suitable for small to medium-sized businesses or homes with high network traffic. Equipped with MU-MIMO technology, the LAPAC1750C can handle multiple users simultaneously, improving overall network efficiency. It also features beamforming technology, which helps to focus signal strength towards connected devices for a more stable connection. With its sleek design, the LAPAC1750C can be easily mounted on walls or ceilings to optimize wireless coverage. It also comes with Power over Ethernet (PoE) support, allowing for flexible placement without the need for additional power outlets. Overall, the Linksys LAPAC1750C is a reliable and high-performance access point that can enhance the connectivity and productivity of any network.

General
BrandLinksys
ModelLAPAC1750C | LAPAC1750C
Productaccess point
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Linksys LAPAC1750C below.

Is the manual of the Linksys LAPAC1750C available in English?

Yes, the manual of the Linksys LAPAC1750C is available in English .

Is your question not listed? Ask your question here

No results