Linksys LAPAC1750C manual

Linksys LAPAC1750C
9.5 · 1
PDF manual
 · 138 pages
English
manualLinksys LAPAC1750C
120

RADIUS Server Configuration

If using WPA2-Enterprise mode, the RADIUS server on your network must be configured as
follows:
It must provide and accept certificates for user authentication.
There must be a client login for the wireless access point itself.
The wireless access point will use its default name as its client login name. (However, your
RADIUS server may ignore this and use the IP address instead.)
The Shared Key, set on the Security screen of the access point, must match the Shared
Secret value on the RADIUS server.
Encryption settings must be correct.

802.1x Server Setup (Windows 2000 Server)

This section describes using Microsoft Internet Authentication Server as the RADIUS server,
since it is the most common RADIUS server available that supports the EAP-TLS authentication
method.
The following services on the Windows 2000 Domain Controller (PDC) are also required.
dhcpd
dns
rras
webserver (IIS)
RADIUS Server (Internet Authentication Service)
Certificate Authority

Windows 2000 Domain Controller Setup

1.
Run dcpromo.exe from the command prompt.
2.
Follow all of the default prompts, ensure that DNS is installed and enabled during
installation.

Services Installation

1.
Select the Control Panel > Add/Remove Programs.
2.
Click Add/Remove Windows Components from the left side.
3.
Ensure that the following components are selected.
Certificate ServicesAfter enabling this, you will see a warning that the computer
cannot be renamed and joined after installing certificate services. Select Yes to
select certificate services and continue

Manual

View the manual for the Linksys LAPAC1750C here, for free. This manual comes under the category access points and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Linksys LAPAC1750C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Linksys and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Linksys LAPAC1750C specifications

Below you will find the product specifications and the manual specifications of the Linksys LAPAC1750C.

The Linksys LAPAC1750C is an access point that provides wireless connectivity for multiple devices within a network. It operates on both the 2.4GHz and 5GHz bands, offering speeds of up to 450 Mbps and 1300 Mbps respectively. The access point is suitable for small to medium-sized businesses or homes with high network traffic. Equipped with MU-MIMO technology, the LAPAC1750C can handle multiple users simultaneously, improving overall network efficiency. It also features beamforming technology, which helps to focus signal strength towards connected devices for a more stable connection. With its sleek design, the LAPAC1750C can be easily mounted on walls or ceilings to optimize wireless coverage. It also comes with Power over Ethernet (PoE) support, allowing for flexible placement without the need for additional power outlets. Overall, the Linksys LAPAC1750C is a reliable and high-performance access point that can enhance the connectivity and productivity of any network.

General
BrandLinksys
ModelLAPAC1750C | LAPAC1750C
Productaccess point
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Linksys LAPAC1750C below.

Is the manual of the Linksys LAPAC1750C available in English?

Yes, the manual of the Linksys LAPAC1750C is available in English .

Is your question not listed? Ask your question here

No results