LigoWave MACH 5 manual

LigoWave MACH 5
6.3 · 1
PDF manual
 · 4 pages
English
manualLigoWave MACH 5

iPoll 3

Wireless Internet service provider Linkfor, operating in Belgogrod region, is a client of LigoWave‘s distributor in Russia - WMD.
Linkfor has over 3300 commercial clients in total and 345 of those clients are connected with LigoWave devices.
Linkfor recently set up a network with 72 CPEs connected to LigoDLB 5 -90 base-station with an integrated dual-polarized 90
degree sector antenna. The base station comes with a 18 dBi dual-polarized 90° sector antenna. All of the CPEs used for this
network were LigoDLB 5 – 15s. The devices were operating in iPoll 3 mode. LigoWave’s iPoll 3 PTMP (point-to-multipoint) pro-
prietary protocol is an innovative solution to eliminate transmission congestion and close cluster interference created in PTMP
wireless installations.
The throughput was measured to be between 55 and 60 Mbps with all 72 CPEs connected. Linkfor offers the following plans for
their customers: 8 Mbps, 6 Mbps and 4 Mbps. The distribution of clients with different speed plans was set as follows: 8 Mbps
for 10% of clients, 6 Mbps for 20% of clients and 4Mbps for 70% of clients.
Stats
Firmware version APCPE.QM-1.v7.54-DEVEL.17819
Mode Access point (iPoll 3)
Channel width 20 MHz
Number of connected CPEs 72 (LigoDLB 5-15)
CPE distances 10% - 2.5-3 km/1.5-1.8 miles
50% - 3-4 km/1.8-2.4 miles
40% - 4-5 km/2.4-3 miles
Customer service Internet access

The distribution of speed plans

10 %
20 %
70 %
8 Mbps 6 Mbps 4 Mbps
COPYRIGHT ©2016 LIGOWAVE

CASE STUDY

View the manual for the LigoWave MACH 5 here, for free. This manual comes under the category Access points and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the LigoWave MACH 5 or do you need help? Ask your question here

Need help?

Do you have a question about the LigoWave and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other LigoWave owners to provide you with a good answer.

Number of questions: 0

General
LigoWave
MACH 5 | LIGODBL MACH 5
Access Point
English
User manual (PDF)
Features
Maximum data transfer rate300 Mbit/s
Bandwidth5.85 GHz
Ethernet LAN data rates10,100 Mbit/s
Wi-Fi data rate (max)300 Mbit/s
2.4 GHz
5 GHz
Frequency band5.150 - 5.850 GHz
Modulation16-QAM,64-QAM,BPSK,OQPSK
Receiver sensitivity-97 - -75
Quality of Service (QoS) support
Transmitting power29 dBmW
Operating modesAccess Point (AP),WDS
Networking standardsIEEE 802.11a,IEEE 802.11n
Channel bandwidth40 MHz
Maximum outdoor range30000 m
Performance
High power
Protocols
Management protocolsHTTP(S) GUI, SSH, SNMP read, WNMS, Telnet
Supported network protocolsIPv6
DHCP client
DHCP server
Design
CertificationFCC, IC, CE
Product colourWhite
PlacementCeiling,In-wall,Wall,Window
Internal-
LED indicatorsLAN,Power,WLAN
International Protection (IP) codeIP67
Ports & interfaces
Ethernet LAN (RJ-45) ports-
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity0
Security
Security algorithmsWPA2-EAP,WPA2-PSK
Packaging content
AC adapter included
PoE adapter included
Weight & dimensions
Width387 mm
Height80 mm
Depth379 mm
Weight3300 g
Operational conditions
Operating relative humidity (H-H)-40 - 65 %
Storage relative humidity (H-H)0 - 90 %
Power
AC input voltage100 - 240 V
Power consumption (max)4.5 W
Power over Ethernet (PoE)
Antenna
Antennas quantity1
Antenna gain level (max)23 dBi
Antenna featuresIntegrated antenna
Management features
Web-based management
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the LigoWave MACH 5 below.

Is your question not listed? Ask your question here

No results