Liebherr TP 1764-22 manual

Liebherr TP 1764-22
6.4 · 1
PDF manual
 · 14 pages
English
manualLiebherr TP 1764-22
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
u
Take the packaging material to an official collecting point.

4.6 Connecting the appliance

NOTICE
Failure to connect properly
Damage to the electronics.
u
Do not use a standalone inverter.
u
Do not use an energy saving plug.
WARNING
Failure to connect properly
Fire hazard.
u
Do not use an extension cable.
u
Do not use distributor blocks.
The type of current (alternating current) and voltage at the
installation site have to conform with the data on the type plate
(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping
current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency. It
must be outside the area of the rear of the appliance.
u
Check the electrical connection.
u
Plug in the power plug.

4.7 Switching on the appliance

u
Press On/Off button
Fig. 3 (1)
.
w
The appliance is switched on. The temperature display indi-
cates the set temperature.
w
If “DEMO” is displayed, demo mode is activated. Please
contact the after sales service.

5 Control

5.1 Brightness of the temperature

display

You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Setting the brightness
The brightness is adjustable between h 0 (minimum bright-
ness) and h 5 (maximum brightness).
u
Activate setting mode by pressing the SuperFrost* button
Fig. 3 (3)
/SuperCool* button
Fig. 3 (4)
for approx. 5 sec.
w
The Menu symbol is shown on the display,
Fig. 3 (5)
.
w
c flashes on the display.
u
Use the adjustment button,
Fig. 3 (2)
, to select h.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.
w
The display shows the last set brightness value.
u
Use the adjustment button,
Fig. 3 (2)
, to set the desired
value from h 0 to h 5.
u
Briefly confirm the newly set brightness value with the
SuperFrost* button
Fig. 3 (3)
/ SuperCool* button
Fig. 3 (4)
.
w
h flashes on the display.
w
The brightness is set.
u
After making the change, deactivate setting mode: Press the
On/Off button
Fig. 3 (1)
once.
w
The temperature display shows the temperature again.
If setting mode is already activated but you would like to keep
the old brightness value setting:
u
Press the On/Off button
Fig. 3 (1)
twice to deactivate setting
mode.
w
The temperature display shows the temperature again.

5.2 Child proofing

The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.2.1 Setting the child lock
To switch on the function:
u
Activate setting mode: press SuperFrost* button
Fig. 3 (3)
/
SuperCool* button
Fig. 3 (4)
for approx. 5 seconds.
w
The Menu symbol
Fig. 3 (5)
is shown on the display.
w
c flashes on the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.
w
c1 appears in the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.
w
The child lock symbol
Fig. 3 (7)
, lights up on the
display.
w
c flashes on the display.
w
The child lock function is switched on.
If setting mode is to be terminated:
u
Briefly press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The temperature display shows the temperature again.
To switch off the function:
u
Activate setting mode: press the SuperFrost* button
Fig. 3 (3)
/SuperCool* button
Fig. 3 (4)
for
approx. 5 seconds.
w
The Menu symbol
Fig. 3 (5)
is shown on the display.
w
c flashes on the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.
w
c0 appears in the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.
w
The child lock symbol
Fig. 3 (7)
goes out.
w
c flashes on the display.
w
The child lock function is switched off.
If setting mode is to be terminated:
u
Briefly press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The temperature display shows the temperature again.

5.3 Refrigerator compartment

The natural circulation of air in the refrigerator compartment
results in zones differing in temperature. It is coldest directly
above the vegetable drawers and at the rear wall. It is warmest
at the top front of the compartment and in the door.

Control

* Depending on model and options 7

Manual

View the manual for the Liebherr TP 1764-22 here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Liebherr TP 1764-22 or do you need help? Ask your question here

Need help?

Do you have a question about the Liebherr and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Liebherr TP 1764-22 specifications

Below you will find the product specifications and the manual specifications of the Liebherr TP 1764-22.

General
BrandLiebherr
ModelTP 1764-22 | TP 1764-22
Productrefrigerator
EAN4016803028772
LanguageEnglish
FiletypeUser manual (PDF)
Design
Appliance placementFreestanding
Product colorWhite
Door hingeRight
Reversible doorsYes
Control typeButtons
Built-in displayYes
Display typeLCD
Housing materialSteel
Shelves materialTempered glass
Built-in capabilityYes
Child lock-
Fridge
Fridge number of shelves/baskets3
Number of vegetable drawers2
Egg balconyYes
Bottle rackYes
Fridge net capacity119 L
Fridge gross capacity124 L
Automatic defrost (fridge)Yes
Fridge interior lightYes
Lamp typeLED
No Frost (fridge)-
Multi-Airflow system (fridge)-
Performance
Climate classSN-T
Noise level39 dB
Total net capacity137 L
Total gross capacity143 L
Other features
ThermostatYes
Ergonomics
Adjustable feetYes
Power
A+++
Connected load- W
Energy usage0.270 kWh/24h
Annual energy consumption99 kWh
Weight & dimensions
Width601 mm
Depth628 mm
Height850 mm
Freezer
Star rating4*
Freezer gross capacity19 L
Freezer net capacity18 L
Freezing capacity2 kg/24h
Ice cube trayYes
Freezer positionTop-placed
Storage time during power failure17 h
No Frost (freezer)-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Liebherr TP 1764-22 below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

What is the height of the Liebherr TP 1764-22?

The Liebherr TP 1764-22 has a height of 850 mm.

What is the width of the Liebherr TP 1764-22?

The Liebherr TP 1764-22 has a width of 601 mm.

What is the depth of the Liebherr TP 1764-22?

The Liebherr TP 1764-22 has a depth of 628 mm.

Is the manual of the Liebherr TP 1764-22 available in English?

Yes, the manual of the Liebherr TP 1764-22 is available in English .

Is your question not listed? Ask your question here

No results