Liebherr CTEL 2531 manual

Liebherr CTEL 2531
8.2 · 2
PDF manual
 · 16 pages
English
manualLiebherr CTEL 2531
Risk of crushing:
-
Do not hold the hinge when opening and
closing the door. Fingers may get caught.
Symbols on the appliance:
This symbol may be located on the
compressor. It relates to the oil in the
compressor and makes reference to the
risk that: Swallowing or inhaling can be
fatal. This advice is only relevant to recy‐
cling. There is no danger in normal opera‐
tion.
This symbol is located on the compressor
and indicates the danger of flammable
materials. Do not remove the sticker.
This or a similar sticker may be located
on the rear of the appliance. This sticker
indicates that there are vacuum insulation
panels (VIP) or perlite panels in the door
and/or housing. This advice is only relevant
to recycling. Do not remove the sticker.
Please note the warning messages and other
specific advice in the other chapters:
DANGER
indicates an immediately
hazardous situation which will
lead to death or serious injuries if
it is not avoided.
WARNING indicates a hazardous situation
which may lead to death or serious
injuries if it is not avoided.
CAUTION indicates a hazardous situation
which may lead to minor or
moderate injuries if it is not
avoided.
NOTICE indicates a hazardous situation
which may lead to damage to
property if it is not avoided.
Note indicates useful instructions and
tips.

3 Controls and displays

3.1 Operating and control elements

Fig.3
(1)
Temperature control (2) SuperCool button

4 Putting into operation

4.1 Transporting the appliance

u
Transport the appliance only in suitable packaging.
u
Transport the appliance upright.
u
Do not transport the appliance on your own.

4.2 Installing the appliance

WARNING
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause
short circuits.
u
The appliance is designed for use in enclosed areas. Do
not operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
WARNING
Danger of fire due to incorrect positioning!
If the mains cable or plug touches the back of the appli‐
ance, the vibration can damage the mains cable or the plug
resulting in a short circuit.
u
Make sure the mains cable is not trapped under the appli‐
ance when you position the appliance.
u
Stand the appliance so that it is not touched by connec‐
tors or main cables.
u
Do not connect any appliances to sockets in the area of
the back of the appliance.
u
Do not place and operate multi-sockets/power distribu‐
tors and other electronic devices (such as halogen trans‐
formers) at the back of the appliances.
WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly,
but also flammable. The oil contained in the appliance
is flammable. Escaping coolant and oil can ignite if the
concentration is high enough and in contact with an
external heat source.
u
Do not damage the pipelines of the coolant circuit and
the compressor.
WARNING
Fire hazard and danger of damage!
u
Do not place appliances emitting heat e.g. microwaves,
toasters etc. on the appliance!
NOTICE
Covered vents!
Damage. Appliance can overheat, which can reduce the
service life of various parts of the appliance and lead to
operational impairments.
u
Always make sure there is good ventilation.
u
Always keep vents or ventilation grids in the appliance
housing and in the kitchen furniture (fully integrated
appliance) unobstructed.
NOTICE
Risk of damage due to condensate!
u
Do not install the appliance directly alongside a further
refrigerator/freezer.
Note
If multiple appliances are placed next to each other, allow a
distance of 100 mm between the appliances. Condensation
will build up between the side walls of the appliances if this
distance is not maintained.

Controls and displays

* Depending on model and options 5

Manual

View the manual for the Liebherr CTEL 2531 here, for free. This manual comes under the category refrigerators and has been rated by 2 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Liebherr CTEL 2531 or do you need help? Ask your question here

Need help?

Do you have a question about the Liebherr and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
L
Lal October 22, 2020

How to regulate the fridge temperature

E
EDAugust 22, 2019

MY FRIDGE DOOR HINGE HAS BROKEN

Liebherr CTEL 2531 specifications

Below you will find the product specifications and the manual specifications of the Liebherr CTEL 2531.

The Liebherr CTEL 2531 refrigerator is an energy-efficient and spacious appliance suitable for households of all sizes. With an energy usage of 0.512 kWh/24h and an annual energy consumption of 212 kWh, it ensures that your electricity bills remain low. Featuring a total net capacity of 234 L, this refrigerator offers ample space to store all your food items. The fridge net capacity of 190 L provides sufficient room for fresh fruits, vegetables, dairy products, and beverages. Meanwhile, the freezer net capacity of 44 L allows you to store frozen goods such as meat, ice cream, and frozen vegetables. With a noise level of 37 dB, the Liebherr CTEL 2531 operates quietly, allowing for a peaceful environment in your kitchen. Its AC input frequency of 50 Hz and current of 1.4 A ensure stable and reliable performance. The refrigerator's total gross capacity is 241 L, with a fridge gross capacity of 196 L and a freezer gross capacity of 45 L. This larger gross capacity provides additional storage options for your groceries and frozen items. Measuring at a height of 1401 mm, the Liebherr CTEL 2531 fits seamlessly into most kitchen spaces and can be easily accessed without any inconvenience. Overall, the Liebherr CTEL 2531 refrigerator is an energy-efficient and spacious appliance with a low noise level, offering ample storage for both fresh and frozen food items. Its reliable performance, combined with its durable construction, ensures that it will serve you well for years to come.

General
BrandLiebherr
ModelCTEL 2531 | CTEL 2531
Productrefrigerator
EAN4016803045991
LanguageEnglish
FiletypeUser manual (PDF)
Power
Energy usage0.512 kWh/24h
Annual energy consumption212 kWh
AC input voltage220 - 240 V
AC input frequency50 Hz
Current1.4 A
Connected load- W
Energy efficiency classF
Energy efficiency scaleA to G
Performance
Climate classSN-T
Noise level37 dB
Total net capacity234 L
Total gross capacity241 L
Minimum operating temperature10 °C
Maximum operating temperature43 °C
C
Fridge
Fridge net capacity190 L
Fridge gross capacity196 L
Super Cool functionNo
Fridge interior lightYes
Lamp typeLED
Automatic defrost (fridge)Yes
Multi-Airflow system (fridge)No
Fridge number of shelves/baskets3
Number of removable shelves2
Bottle rackYes
Can rackYes
Fridge door balconies3
Egg balconyYes
Number of vegetable drawers1
No Frost (fridge)No
Cooling systemStatic
Freezer
Freezer net capacity44 L
Freezer gross capacity45 L
Freezer positionTop-placed
Fast freeze functionNo
Multi-Airflow system (freezer)No
Star rating4*
Automatic defrost (freezer)No
Storage time during power failure22 h
Freezing capacity4 kg/24h
Freezer interior lightNo
Ice cube trayYes
Freezer number of shelves/baskets2
Freezer door balconies0
No Frost (freezer)Yes
Weight & dimensions
Height1401 mm
Width550 mm
Depth630 mm
Weight47900 g
Width with door open559 mm
Packaging data
Package height1454 mm
Package width567 mm
Package depth711 mm
Package weight51600 g
Design
Appliance placementFreestanding
Product colorSilver
Reversible doorsYes
Door hingeRight
Built-in displayNo
Control typeRotary
Shelves materialTempered glass
Housing materialSteel
Refrigerating mediumR600a
Refrigerating medium weight11 g
Number of compressors1
Fresh zone
Fresh zone compartmentNo
Ergonomics
Door open alarmNo
Temperature alarmNo
Cord length1.3 m
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Liebherr CTEL 2531 below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

What is the weight of the Liebherr CTEL 2531?

The Liebherr CTEL 2531 has a weight of 47900 g.

What is the height of the Liebherr CTEL 2531?

The Liebherr CTEL 2531 has a height of 1401 mm.

What is the width of the Liebherr CTEL 2531?

The Liebherr CTEL 2531 has a width of 550 mm.

What is the depth of the Liebherr CTEL 2531?

The Liebherr CTEL 2531 has a depth of 630 mm.

What energy label does the Liebherr CTEL 2531 have?

The Liebherr CTEL 2531 has energy label F.

What is the energy usage of Liebherr CTEL 2531?

Liebherr CTEL 2531 has an energy usage of 0.512 kWh/24h. This means it consumes a relatively low amount of energy compared to other refrigerators, making it an energy-efficient choice for users.

How much noise does the Liebherr CTEL 2531 produce?

The Liebherr CTEL 2531 has a noise level of 37 dB. With this low level of noise, users can enjoy a quiet environment in their kitchen without being disturbed by the refrigerator's operation.

What is the total net capacity of the Liebherr CTEL 2531?

The Liebherr CTEL 2531 has a total net capacity of 234 L. This is a decent capacity, providing users with ample storage space for their groceries and food items.

Can the doors of Liebherr CTEL 2531 be reversed?

Yes, the doors of Liebherr CTEL 2531 are reversible. This feature allows users to adjust the door opening direction according to their kitchen layout and personal preference.

Where can Liebherr CTEL 2531 be placed?

The Liebherr CTEL 2531 is designed to be freestanding, meaning it can be placed anywhere in the kitchen without the need for built-in installation. This provides users with flexibility in positioning the refrigerator.

How do I know if the Liebherr CTEL 2531 refrigerator is suitable for built-in installation?

To determine if the Liebherr CTEL 2531 refrigerator is suitable for built-in installation, follow these steps: 1. Check the manual for instructions on fitting the upper door. Set the upper door down on the center bearing block and insert the upper turn hinge in the door on the new hinge side. Screw in the upper bearing block tightly. 2. Review the section on insertion into a row of kitchen units. If you plan to install the refrigerator with kitchen units, ensure that the maximum depth of the kitchen units is 580 mm. The appliance can be positioned directly next to the kitchen cabinet, with a projection of 34 mm at the sides and 50 mm in the center. 3. Pay attention to the ventilation requirements. There should be a ventilation duct of at least 50 mm depth throughout the width of the stack cabinet at the back. The cross-section of the ventilation gap below the ceiling must be at least 300 cm2. Adequate air ventilation is essential to prevent overheating and ensure proper operation. 4. If installing the appliance with the hinges next to a wall, ensure that there is a minimum distance of 40 mm between the appliance and the wall. This corresponds to the projection of the handle when the door is open. By following these steps, you can determine if the Liebherr CTEL 2531 refrigerator is suitable for built-in installation.

How can I save energy while using the Liebherr CTEL 2531 refrigerator?

To save energy while using the Liebherr CTEL 2531 refrigerator, follow these steps: 1. Ensure good ventilation: Do not cover the ventilation holes or grids of the refrigerator. This allows for proper airflow and prevents the appliance from overheating. Avoid installing the refrigerator in direct sunlight, next to an oven, radiator, or similar heat sources. 2. Set the temperature appropriately: The energy consumption of the refrigerator depends on the installation conditions, such as the ambient temperature. A warmer ambient temperature can increase energy consumption. Set the temperature to the desired level, considering energy efficiency. 3. Optimize food storage: Sort your food properly to maximize energy efficiency. Keep all food properly packed and covered to prevent frost formation. Only take out the food for as long as necessary to avoid excessive warming. Allow warm food to cool down to room temperature before placing it in the refrigerator. Thaw frozen food in the refrigerator instead of using external methods. 4. Regularly defrost the appliance: If there is a thick layer of frost in the refrigerator, it is recommended to defrost the appliance. Excessive frost can increase energy consumption. 5. Clean the appliance: Dust deposits on the metal grid at the back of the refrigerator can increase energy consumption. For refrigerators with heat exchangers, it is advisable to dust the metal grid once a year. By following these steps, you can effectively save energy while using the Liebherr CTEL 2531 refrigerator.

How do I operate the controls and displays of the Liebherr CTEL 2531 refrigerator?

To operate the controls and displays of the Liebherr CTEL 2531 refrigerator, follow these steps: 1. Locate the temperature controller: The temperature controller is typically labeled and can be found on the front panel of the refrigerator. It allows you to adjust the temperature settings for the refrigerator compartment. 2. Set the desired temperature: Use the temperature controller to select the desired temperature for the refrigerator compartment. Turning the controller clockwise usually decreases the temperature, while turning it counterclockwise increases the temperature. 3. Find the Cool-Plus switch: The Cool-Plus switch is another control feature available on the refrigerator. It is used to activate a rapid cooling function, which can be helpful when storing large amounts of food or when the refrigerator has been opened frequently. 4. Use the Cool-Plus switch (optional): If you need to activate the rapid cooling function, locate the Cool-Plus switch and turn it on. This will temporarily lower the temperature inside the refrigerator to quickly cool down the stored items. By following these steps, you can easily operate the controls and displays of the Liebherr CTEL 2531 refrigerator.

How do I manually defrost the Liebherr CTEL 2531 refrigerator?

To manually defrost the Liebherr CTEL 2531 refrigerator, follow these steps: 1. Switch off the appliance: Turn off the refrigerator by pulling out the power plug or switching off the fuse. This ensures safety during the defrosting process. 2. Prepare a pan with hot water: Place a pan with hot water (not boiling) on a middle shelf of the freezer compartment. The hot water will help speed up the defrosting process. 3. Open the door and leave it open: Leave the door of the refrigerator open while defrosting. This allows the ice to melt and the water to drain away. 4. Remove detached pieces of ice: As the ice melts, remove any detached pieces of ice from the freezer compartment. You can use a sponge or cloth to pick up the defrost water if necessary. 5. Clean the appliance: Once the defrosting process is complete, clean the refrigerator compartment. Use a mild cleaning agent and a soft cloth to clean the interior surfaces. Avoid using sharp objects or abrasive cleaning agents that may damage the appliance. By following these steps, you can manually defrost the Liebherr CTEL 2531 refrigerator and ensure its optimal performance.

What should I do if the Liebherr CTEL 2531 refrigerator is not cooling properly?

If the Liebherr CTEL 2531 refrigerator is not cooling properly, follow these steps: 1. Check if the refrigerator is switched on: Ensure that the appliance is properly connected to the power supply and turned on. If not, switch on the refrigerator. 2. Verify the door closure: Make sure that the refrigerator door is fully closed. A partially open or improperly closed door can lead to inadequate cooling. Close the door properly and check if it seals tightly. 3. Ensure proper ventilation: Check if the ventilation grille at the back of the refrigerator is clear and not blocked by any objects. Adequate ventilation is necessary for proper cooling. Remove any obstructions and ensure proper airflow around the appliance. 4. Adjust the temperature settings: Verify that the temperature settings are correctly set. The recommended temperature for the refrigerator compartment is typically between 2°C and 8°C. Adjust the temperature if necessary. 5. Clean the condenser coils: Over time, dust and debris can accumulate on the condenser coils, affecting the cooling efficiency. Clean the condenser coils using a soft brush or vacuum cleaner to remove any dirt or dust buildup. If the issue persists after following these steps, it is recommended to contact the after-sales service for further assistance.

How do I know if the Liebherr CTEL 2531 refrigerator is suitable for built-in installation?

To determine if the Liebherr CTEL 2531 refrigerator is suitable for built-in installation, follow these steps: 1. Check the manual for instructions on fitting the upper door. Set the upper door down on the center bearing block and insert the upper turn hinge in the door on the new hinge side. Screw in the upper bearing block tightly. 2. Review the section on insertion into a row of kitchen units. If you plan to install the refrigerator with kitchen units, ensure that the maximum depth of the kitchen units is 580 mm. The appliance can be positioned directly next to the kitchen cabinet, with a projection of 34 mm at the sides and 50 mm in the center. 3. Pay attention to the ventilation requirements. There should be a ventilation duct of at least 50 mm depth throughout the width of the stack cabinet at the back. The cross-section of the ventilation gap below the ceiling must be at least 300 cm2. Adequate air ventilation is essential to prevent overheating and ensure proper operation. 4. If installing the appliance with the hinges next to a wall, ensure that there is a minimum distance of 40 mm between the appliance and the wall. This corresponds to the projection of the handle when the door is open. By following these steps, you can determine if the Liebherr CTEL 2531 refrigerator is suitable for built-in installation.

How can I save energy while using the Liebherr CTEL 2531 refrigerator?

To save energy while using the Liebherr CTEL 2531 refrigerator, follow these steps: 1. Ensure good ventilation: Do not cover the ventilation holes or grids of the refrigerator. This allows for proper airflow and prevents the appliance from overheating. Avoid installing the refrigerator in direct sunlight, next to an oven, radiator, or similar heat sources. 2. Set the temperature appropriately: The energy consumption of the refrigerator depends on the installation conditions, such as the ambient temperature. A warmer ambient temperature can increase energy consumption. Set the temperature to the desired level, considering energy efficiency. 3. Optimize food storage: Sort your food properly to maximize energy efficiency. Keep all food properly packed and covered to prevent frost formation. Only take out the food for as long as necessary to avoid excessive warming. Allow warm food to cool down to room temperature before placing it in the refrigerator. Thaw frozen food in the refrigerator instead of using external methods. 4. Regularly defrost the appliance: If there is a thick layer of frost in the refrigerator, it is recommended to defrost the appliance. Excessive frost can increase energy consumption. 5. Clean the appliance: Dust deposits on the metal grid at the back of the refrigerator can increase energy consumption. For refrigerators with heat exchangers, it is advisable to dust the metal grid once a year. By following these steps, you can effectively save energy while using the Liebherr CTEL 2531 refrigerator.

How do I operate the controls and displays of the Liebherr CTEL 2531 refrigerator?

To operate the controls and displays of the Liebherr CTEL 2531 refrigerator, follow these steps: 1. Locate the temperature controller: The temperature controller is typically labeled and can be found on the front panel of the refrigerator. It allows you to adjust the temperature settings for the refrigerator compartment. 2. Adjust the temperature: Use the temperature controller to set the desired temperature for the refrigerator compartment. Turning the controller clockwise will lower the temperature, while turning it counterclockwise will increase the temperature. 3. Find the Cool-Plus switch: The Cool-Plus switch is another control feature of the refrigerator. It is usually located near the temperature controller. 4. Activate the Cool-Plus function: The Cool-Plus switch enables a rapid cooling function in the refrigerator compartment. To activate this feature, simply toggle the switch to the "On" position. This can be useful when you need to quickly cool down newly added groceries or beverages. By following these steps, you can easily operate the controls and displays of the Liebherr CTEL 2531 refrigerator.

How do I manually defrost the Liebherr CTEL 2531 refrigerator?

To manually defrost the Liebherr CTEL 2531 refrigerator, follow these steps: 1. Switch off the appliance: Ensure that the refrigerator is switched off and unplugged from the power source. 2. Prepare for defrosting: Remove all food items from the freezer compartment and transfer them to a temporary storage location to keep them frozen. 3. Speed up the defrosting process: Place a pan with hot water (not boiling) on a middle shelf of the freezer compartment. This will help speed up the defrosting process. 4. Open the door and wait: Leave the door of the refrigerator open while defrosting. This allows the ice to melt and water to drain away. You can use a sponge or cloth to remove any detached pieces of ice. 5. Collect defrost water: If necessary, collect the defrost water several times using a sponge or cloth. This will prevent water from overflowing and causing a mess. 6. Clean the appliance: Once the defrosting process is complete, clean the interior of the refrigerator using a mild detergent and warm water. Avoid using abrasive cleaning agents or sharp objects that could damage the appliance. By following these steps, you can manually defrost the Liebherr CTEL 2531 refrigerator and ensure its proper functioning.

What should I do if the Liebherr CTEL 2531 refrigerator is not cooling properly?

If the Liebherr CTEL 2531 refrigerator is not cooling properly, follow these steps: 1. Check the door: Ensure that the refrigerator door is properly closed. If the door is not closed tightly, it can lead to inadequate cooling. Make sure there are no obstructions preventing the door from closing properly. 2. Verify ventilation: Ensure that the ventilation grille at the back of the refrigerator is clear and not blocked. Proper ventilation is essential for the refrigerator to cool effectively. 3. Adjust temperature settings: Check the temperature settings of the refrigerator. Make sure the temperature is set to the desired level and not too high. Adjust the temperature if necessary. 4. Clean the condenser coils: Over time, dust and debris can accumulate on the condenser coils, affecting the cooling performance. Clean the condenser coils using a soft brush or vacuum cleaner to remove any buildup. 5. Monitor usage: Avoid opening the refrigerator door frequently or leaving it open for extended periods. Excessive opening and prolonged open-door time can impact cooling efficiency. Be mindful of how often and how long the door is open. If the issue persists after following these steps, it is recommended to contact the after-sales service for further assistance.

Is the manual of the Liebherr CTEL 2531 available in English?

Yes, the manual of the Liebherr CTEL 2531 is available in English .

Is your question not listed? Ask your question here

No results