LG 42LC4R manual

LG 42LC4R
7.8 · 2
PDF manual
 · 88 pages
English
manualLG 42LC4R

LCD TV

PLASMA TV

OWNER’S MANUAL

LCD TV MODELS
26LC4R
*
32LC4R
*
37LC4R
*
42LC4R
*
32LB9R
*
42LB9R
*
PLASMA TV MODELS
42PC5R
*
42PC5RV
*
42PC7R
*
50PC5R
*
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
26LC7R*
32LC7R*
37LC7R*
42LC7R*
ENGLISH

Manual

View the manual for the LG 42LC4R here, for free. This manual comes under the category televisions and has been rated by 2 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the LG 42LC4R or do you need help? Ask your question here

Index

Need help?

Do you have a question about the LG and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

LG 42LC4R specifications

Below you will find the product specifications and the manual specifications of the LG 42LC4R.

General
BrandLG
Model42LC4R
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the LG 42LC4R below.

What's the best viewing distance for my LG television?

The ideal viewing distance for your LG television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I switch between different models of LCD TVs?

To switch between different models of LCD TVs, follow these steps: 1. Identify the specific model of your LG 42LC4R TV. You can find this information on the label located on the back cover of the TV. 2. Use the remote control to access the menu options. Press the "Menu" button. 3. Navigate through the menu using the arrow buttons on the remote control. Look for the "Settings" or "Setup" option and select it. 4. Within the settings menu, locate the "Model Selection" or "TV Model" option. This option allows you to switch between different models of LCD TVs. 5. Select the desired model from the available options. Use the arrow buttons to scroll through the list and press the "OK" button to confirm your selection. 6. Once you have selected the desired model, the TV will automatically adjust its settings to match the selected model. By following these steps, you can easily switch between different models of LCD TVs on your LG 42LC4R television.

Why is the power/standby indicator on my LG 42LC4R TV not illuminating?

If the power/standby indicator on your LG 42LC4R TV is not illuminating, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the TV is properly connected to a working power outlet. Verify that the power cable is securely plugged in at both ends. 2. Test the remote control: Press the power button on the remote control to see if it turns on the TV. If the indicator still does not illuminate, try replacing the batteries in the remote control. 3. Check the TV settings: Access the TV menu using the remote control and navigate to the "Settings" or "Setup" option. Look for any power-related settings, such as "Power Saving Mode" or "Sleep Timer," and make sure they are not enabled. 4. Power cycle the TV: Disconnect the power cable from the TV and wait for about 1 minute. Then, reconnect the power cable and try turning on the TV again. 5. Contact customer support: If the power/standby indicator still does not illuminate after trying the above steps, it may indicate a hardware issue. Contact LG customer support for further assistance and possible repairs. By following these steps, you can troubleshoot the issue of the power/standby indicator not illuminating on your LG 42LC4R TV.

How does the Intelligent Eye feature work on my LG 42LC4R TV?

The Intelligent Eye feature on the LG 42LC4R TV adjusts the picture according to the surrounding conditions. Here's how it works: 1. Press the "Menu" button on the remote control to access the TV menu. 2. Navigate to the "Picture" or "Picture Settings" option using the arrow buttons on the remote control. 3. Select the "Intelligent Eye" option from the menu. This option may be available only on certain models, such as the 32/42LB9R*. 4. When the Intelligent Eye function is enabled, the TV automatically adjusts the picture settings based on the surrounding conditions. This ensures that the picture quality is optimized for the current environment. 5. The Intelligent Eye feature takes into account factors like ambient light and room brightness to adjust the contrast, brightness, and other picture settings accordingly. 6. If you prefer manual control over the picture settings, you can disable the Intelligent Eye feature and manually adjust the picture settings to your preference. By utilizing the Intelligent Eye feature, the LG 42LC4R TV can provide an enhanced viewing experience by automatically adapting the picture quality to suit the surrounding conditions.

What are the functions of the programme, volume, OK, menu, input, and power buttons on the remote control of my LG 42LC4R TV?

The remote control of the LG 42LC4R TV has several buttons with different functions. Here's what each button does: 1. Programme buttons: These buttons allow you to navigate through the available channels. Use the up and down arrows to switch between channels, and the left and right arrows to browse through the channel list. 2. Volume buttons: The volume buttons control the audio level of the TV. Press the "+" button to increase the volume and the "-" button to decrease it. 3. OK button: The OK button is used to confirm selections and access menu options. When navigating through the menu, use the arrow buttons to highlight an option, and then press OK to select it. 4. Menu button: Pressing the Menu button opens the TV menu. From here, you can access various settings and options to customize your viewing experience. 5. Input button: The Input button allows you to switch between different input sources, such as HDMI, AV, or USB. Press the Input button to cycle through the available input options. 6. Power button: The Power button turns the TV on or off. Press the Power button once to turn on the TV, and press it again to turn it off. By using these buttons on the remote control, you can navigate channels, adjust the volume, access the menu, switch input sources, and control the power of your LG 42LC4R TV.

Is the manual of the LG 42LC4R available in English?

Yes, the manual of the LG 42LC4R is available in English .

Is your question not listed? Ask your question here

No results