Lexmark M1242 manual

Lexmark M1242
6.4 · 1
PDF manual
 · 140 pages
English
manualLexmark M1242

Federal Communications Commission (FCC) compliance information

statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment
o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult your point of purchase or service representative for additional suggestions.
The manufacturer is not responsible for radio or television interference caused by using other than
recommended cables or by unauthorized changes or
modifications
to this equipment. Unauthorized changes
or
modifications
could void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing
device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach
or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a
violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–3000
E-mail: regulatory@lexmark.com

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux
équipements pouvant causer des interférences NMB-003.
Notices 132

Manual

View the manual for the Lexmark M1242 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Lexmark M1242 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Lexmark and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Lexmark M1242 specifications

Below you will find the product specifications and the manual specifications of the Lexmark M1242.

General
BrandLexmark
ModelM1242 | 36S0251
Productprinter
EAN0734646659802
LanguageEnglish
FiletypeUser manual (PDF)
Design
Built-in displayYes
DisplayOLED
Product colorGrey, White
Color displayNo
Market positioningHome & office
TouchscreenNo
CertificationBlue Angel RAL-UZ-171, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, NOM, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, TED, GOST-R, SII, TER
Display number of lines- lines
Printing
ColorNo
Print speed (black, normal quality, A4/US Letter)40 ppm
Time to first page (black, normal)6.25 s
Maximum resolution1200 x 1200 DPI
Duplex printingYes
Print technologyLaser
Duplex printing modeAuto
Performance
Internal memory512 MB
Maximum internal memory512 MB
Built-in processorYes
Processor frequency1000 MHz
Sound pressure level (printing)55 dB
Features
Maximum duty cycle100000 pages per month
Printing colorsBlack
Page description languages-
Maximum cartridge yield (black)21000 pages
Average cartridge yield (black)3000 pages
Number of print cartridges1
Recommended duty cycle1000 - 10000 pages per month
Input & output capacity
Total input capacity300 sheets
Maximum input capacity900 sheets
Total output capacity150 sheets
Maximum output capacity150 sheets
Paper handling
Paper tray media typesCard stock, Envelopes, Plain paper, Transparencies
ISO A-series sizes (A0...A9)A4, A5, A6
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal
JIS B-series sizes (B0...B9)B5
Envelopes sizes7 3/4, 9,10
Maximum ISO A-series paper sizeA4
Paper tray media weight (imperial)16 - 32 lbs
Multi-Purpose Tray media weight (imperial)16 - 58 lbs
Network
Ethernet LANYes
Wi-FiNo
Network readyYes
Cabling technology10/100/1000Base-T(X)
Mobile printing technologies-
Management protocolsHTTP, HTTPs (SSL/TLS), SNMPv1, SNMPv2c, SNMPv3, WINS, IGMP, APIPA, DHCP, ICMP, DNS DDNS mDNS ARP NTP Telnet Finger
Security algorithmsIPSec, LEAP, MD5, MSCHAPv2, PEAP, SNMPv3, SSL/TLS, TTLS
Ethernet LAN data rates10,100,1000 Mbit/s
Ports & interfaces
Standard interfacesEthernet, USB 2.0
USB connectorUSB Type-B
USB 2.0 ports quantity1
Operational conditions
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Operating altitude0 - 5000 m
Weight & dimensions
Height260 mm
Width399 mm
Depth374 mm
Weight14000 g
Packaging content
ManualYes
Power
Power consumption (printing)- W
System requirements
Mac operating systems supportedMac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Linux operating systems supportedDebian 7.0, Debian 8.0, Fedora 23, Fedora 24, Red Hat Enterprise Linux WS 6.0, Red Hat Enterprise Linux WS 7.0, SuSE Linux 10, SuSE Linux 12.0, Ubuntu 16.04
Windows operating systems supportedWindows 10, Windows 7, Windows 7 Enterprise x64, Windows 8, Windows 8 Enterprise x64, Windows 8.1, Windows 8.1 x64
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Lexmark M1242 below.

What is the weight of the Lexmark M1242?

The Lexmark M1242 has a weight of 14000 g.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

What certifications does the Lexmark M1242 have?

The Lexmark M1242 has the following certifications: Blue Angel RAL-UZ-171, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, NOM, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, TED, GOST-R, SII, TER.

How many cartridges can be placed in the Lexmark M1242?

1 cartridges can be placed in the Lexmark M1242.

What is the height of the Lexmark M1242?

The Lexmark M1242 has a height of 260 mm.

What is the width of the Lexmark M1242?

The Lexmark M1242 has a width of 399 mm.

What is the depth of the Lexmark M1242?

The Lexmark M1242 has a depth of 374 mm.

Is the manual of the Lexmark M1242 available in English?

Yes, the manual of the Lexmark M1242 is available in English .

Is your question not listed? Ask your question here

No results