Whatsapp
Mail
Facebook
Need help?
Number of questions: 1Do you have a question about the Lexmark CX410 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Lexmark CX410 owners to properly answer your question.
Index
- Contents
- Safety information
- ❯ Learning about the printer
- ❯ Understanding the printer control panel
- ❯ Setting up and using the home screen applications
- ❯ Additional printer setup
- ❯ Installing internal options
- ❯ Installing hardware options
- Attaching cables
- ❯ Setting up the printer software
- ❯ Networking
- Preparing to set up the printer on an Ethernet network
- Preparing to set up the printer on a wireless network
- Connecting the printer using the Wireless Setup Wizard
- Connecting the printer to a wireless network using Wi-Fi Protected Setup
- Connecting the printer to a wireless network using the Embedded Web Server
- Preparing to set up the printer on an Ethernet network
- ❯ Verifying printer setup
- ❯ Loading paper and specialty media
- ❯ Paper and specialty media guide
- ❯ Printing
- ❯ Copying
- ❯ Making copies
- Copying photos
- ❯ Copying on specialty media
- Creating a copy shortcut using the printer control panel
- ❯ Customizing copy settings
- Copying to a different size
- Making copies using paper from a selected tray
- Copying different paper sizes
- Copying on both sides of the paper (duplexing)
- Reducing or enlarging copies
- Adjusting copy quality
- Collating copies
- Placing separator sheets between copies
- Copying multiple pages onto a single sheet
- Copying to a different size
- ❯ Placing information on copies
- ❯ Canceling a copy job
- ❯ Understanding the copy options
- ❯ E-mailing
- ❯ Faxing
- ❯ Setting up the printer to fax
- ❯ Sending a fax
- ❯ Creating shortcuts
- ❯ Customizing fax settings
- ❯ Canceling an outgoing fax
- ❯ Holding and forwarding faxes
- ❯ Understanding the fax options
- ❯ Scanning
- ❯ Understanding printer menus
- ❯ Saving money and the environment
- ❯ Securing the printer
- ❯ Maintaining the printer
- ❯ Managing the printer
- Finding advanced networking and administrator information
- Checking the virtual display
- Setting up e-mail alerts
- Viewing reports
- Configuring supply notifications from the Embedded Web Server
- Modifying confidential print settings
- Copying printer settings to other printers
- Restoring factory default settings
- Finding advanced networking and administrator information
- ❯ Clearing jams
- Avoiding jams
- Understanding jam messages and locations
- [x]-page jam, clear standard bin [203.xx]
- [x]-page jam, open front door to clear fuser [202.xx]
- [x]-page jam, open front door [20y.xx]
- [x]-page jam, open front door to clear duplex [23y.xx]
- [x]-page jam, open tray [x] [24y.xx]
- [x]-page jam, clear manual feeder [251.xx]
- [x]-page jam, clear multipurpose feeder [250.xx]
- [x]-page jam, open automatic feeder top cover. [28y.xx]
- Avoiding jams
- ❯ Troubleshooting
- ❯ Understanding the printer messages
- Adjusting color
- Change [paper source] to [custom type name]
- Change [paper source] to [custom string]
- Change [paper source] to [paper type] [paper size]
- Close door
- Close flatbed cover and load originals if restarting job [2yy.xx]
- [Color] cartridge low [88.xy]
- [Color] cartridge nearly low [88.xy]
- [Color] cartridge very low, [x] estimated pages remain [88.xy]
- Complex page, some data may not have printed [39]
- Configuration change, some held jobs were not restored [57]
- Defective flash detected [51]
- Disk full [62]
- Disk must be formatted for use in this device
- Error reading USB drive. Remove USB.
- Error reading USB hub. Remove hub.
- Incompatible tray [x] [59]
- Incorrect paper size, open [paper source] [34]
- Insert Tray [x]
- Insufficient memory for Flash Memory Defragment operation [37]
- Insufficient memory, some Held Jobs were deleted [37]
- Insufficient memory to collate job [37]
- Insufficient memory to support Resource Save feature [35]
- Insufficient memory, some held jobs will not be restored [37]
- Load [paper source] with [custom type name]
- Load [paper source] with [custom string]
- Load [paper source] with [paper size]
- Load [paper source] with [paper type] [paper size]
- Load Manual Feeder with [custom string]
- Load Manual Feeder with [custom type name]
- Load Manual Feeder with [paper size]
- Load Manual Feeder with [paper type] [paper size]
- Maintenance kit low [80.xy]
- Maintenance kit nearly low [80.xy]
- Maintenance kit very low, [x] estimated pages remain [80.xy]
- Memory full [38]
- Network [x] software error [54]
- Not enough free space in flash memory for resources [52]
- Non-Lexmark [color] [supply type], see User's Guide [33.xy]
- Reinstall missing or unresponsive [color] cartridge [31.xy]
- Reinstall missing or unresponsive [type] imaging kit [31.xy]
- Reload printed pages in Tray [x]
- Remove packaging material, [area name]
- Remove paper from standard output bin
- Replace [color] cartridge, 0 estimated pages remain [88.xy]
- Replace [color] cartridge, printer region mismatch [42.xy]
- Replace [type] imaging kit, 0 estimated pages remain [84.xy]
- Replace all originals if restarting job.
- Remove defective disk [61]
- Replace defective [color] cartridge [31.xy]
- Replace defective [type] imaging kit [31.xy]
- Replace jammed originals if restarting job.
- Replace maintenance kit, 0 estimated pages remain [80.xy]
- Replace missing [color] cartridge [31.xy]
- Replace missing [type] imaging kit [31.xy]
- Replace missing waste toner bottle [82.xy]
- Replace unsupported [color] cartridge [32.xy]
- Replace unsupported [type] imaging kit [32.xy]
- Replace waste toner bottle [82.xy]
- Restore held jobs?
- Scanner automatic feeder cover open
- Scanner disabled by admin [840.01]
- Scanner disabled. Contact system administrator if problem persists. [840.02]
- Scanner jam, remove all originals from the scanner [2yy.xx]
- Scanner jam, remove jammed originals from the scanner [2yy.xx]
- Some held jobs were not restored
- SMTP server not set up. Contact system administrator.
- Standard network software error [54]
- Standard USB port disabled [56]
- Supply needed to complete job
- Too many flash options installed [58]
- Too many trays attached [58]
- [Type] imaging kit low [84.xy]
- [Type] imaging kit nearly low [84.xy]
- [Type] imaging kit very low, [x] estimated pages remain [84.xy]
- Unformatted flash detected [53]
- Waste toner bottle nearly full [82.xy]
- Weblink server not set up. Contact system administrator.
- Adjusting color
- ❯ Solving printer problems
- ❯ Solving print problems
- ❯ Printing problems
- Confidential and other held jobs do not print
- Error message about reading the flash drive appears
- Incorrect characters print
- Job prints from the wrong tray or on the wrong paper
- Large jobs do not collate
- Multiple-language PDF files do not print
- Printing slows down
- Print jobs do not print
- Print job takes longer than expected
- Tray linking does not work
- Unexpected page breaks occur
- Confidential and other held jobs do not print
- ❯ Print quality problems
- Characters have jagged or uneven edges
- Clipped pages or images
- Gray background on prints
- Horizontal voids appear on prints
- Incorrect margins on prints
- Paper curl
- Print irregularities
- Print is too dark
- Print is too light
- Printer is printing blank pages
- Printer is printing solid black pages
- Repeating defects appear on prints
- Shadow images appear on prints
- Skewed print
- Streaked horizontal lines appear on prints
- Streaked vertical lines appear on prints
- Toner fog or background shading appears on prints
- Toner rubs off
- Toner specks appear on prints
- Transparency print quality is poor
- Uneven print density
- Vertical voids appear on prints
- Characters have jagged or uneven edges
- ❯ Color quality problems
- ❯ Printing problems
- ❯ Solving copy problems
- ❯ Solving fax problems
- ❯ Solving scanner problems
- ❯ Solving home screen applications problems
- Embedded Web Server does not open
- Contacting customer support
- ❯ Understanding the printer messages
- ❯ Notices
- Product information
- Edition notice
- GOVERNMENT END USERS
- Licensing notices
- Trademarks
- Noise emission levels
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Product disposal
- Static sensitivity notice
- ENERGY STAR
- Temperature information
- Laser notice
- Laser advisory label
- ❯ Power consumption
- Regulatory notices for electromagnetic compatibility
- Federal Communications Commission (FCC) compliance information statement
- 日本の VCCI 規定
- European Community (EC) directives conformity
- Regulatory notices for telecommunication terminal equipment
- Notice to users of the US telephone network: FCC requirements
- Notice to users of the Canadian telephone network
- Industry Canada (Canada)
- Notice to users of the New Zealand telephone network
- Japanese telecom notice
- Notice to Users in the European Union
- Regulatory notices for wireless products
- Modular component notice
- Exposure to radio frequency radiation
- Notice to users in the European Union
- STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...
- Patent acknowledgment
- Product information
- Index
About the Lexmark CX410
View the manual for the Lexmark CX410 here, for free. This manual comes under the category Printers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Lexmark CX410 or do you need help? Ask your question here
Related product manuals
Frequently Asked Questions
Below, you will find the most frequently asked questions about the Lexmark CX410.
What is the best way to remove jammed paper from my printer?
It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.
How come my printer does not accept original cartridges?
Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.
How come my prints are of poor quality?
There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.
What is the difference between a laser printer and an inkjet printer?
A laser printer prints with a toner and an inkjet printer prints with ink.
How come my inkjet printer has black stripes?
In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.
What does DPI stand for?
DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.
Is the manual of the Lexmark CX410 available in English?
Yes, the manual of the Lexmark CX410 is available in English .
Is your question not listed? Ask your question here
When printing a customer's invoice with their signature the copy comes out with the signature line blacked out. How can we turn off that feature?