LevelOne FCS-1158 manual

LevelOne FCS-1158
6.8 · 1
PDF manual
 · 110 pages
English
manualLevelOne FCS-1158

25

How to Set and Enable Tours

Once a preset point is created, the Touring Control page tab appears. Click the Touring
Control page tab to configure the Preset Tour. A Preset Tour directs the camera to cycle
through a sequence of preset points and stay on each preset point for a specific time.
To set or modify a tour, do the following:
1. On Select a Preset Point, select a tour and then click Edit Tour.
2. Select a preset point from the list, set the duration (sec) of how long the camera will stay
in that point and the pan/tilt speed (the bigger the number, the faster the speed), and then
click .
3. On the Preset Points, the preset points added to the Tour are listed.
To change the sequence of preset points, click the (first / up /
down / last) icons.
Duration
Pan/Tilt Speed

Manual

View the manual for the LevelOne FCS-1158 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the LevelOne FCS-1158 or do you need help? Ask your question here

Need help?

Do you have a question about the LevelOne and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

LevelOne FCS-1158 specifications

Below you will find the product specifications and the manual specifications of the LevelOne FCS-1158.

The LevelOne FCS-1158 is an indoor IP security camera with a bullet form factor, designed for ceiling or wall mounting. With Wide Dynamic Range (WDR) and day/night mode capabilities, it provides clear and detailed imagery at a maximum resolution of 2592 x 1944 pixels, equating to 5 megapixels. The camera supports various video formats, including RAW, and offers noise reduction for improved image quality. LED indicators for power status are present for easy monitoring. This security camera is suitable for indoor surveillance networks, offering a reliable and cost-effective solution. It supports multiple graphic resolutions, ranging from 320 x 240 to 2592 x 1944 pixels, along with various video modes such as 240p, 480p, 720p, and 1080p. Additionally, the LevelOne FCS-1158 features 802.3af standard PoE for power and data transmission via a single Cat.5 cable, enhancing convenience and efficiency in installation. Overall, the LevelOne FCS-1158 is a practical choice for indoor security monitoring, providing high-quality images and easy setup with its PoE capability and versatile mounting options.

General
BrandLevelOne
ModelFCS-1158 | FCS-1158
Productsecurity camera
EAN4015867206386
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeIP security camera
Placement supportedIndoor
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Connectivity technologyWired
CertificationCF/FCC
Design
Form factorBullet
Product colorBlack, Grey
Mounting typeCeiling/wall
LED indicatorsPower
Country of originTaiwan
Video
Maximum resolution2592 x 1944 pixels
Total megapixels5 MP
Video formats supportedRAW
Video compression formatsH.264, H.265, M-JPEG
Supported graphics resolutions320 x 240,640 x 480 (VGA),800 x 600 (SVGA),1280 x 720 (HD 720),1280 x 960,1920 x 1080 (HD 1080),2048 x 1536 (QXGA),2592 x 1944
Supported video modes240p, 480p, 720p, 1080p
Noise reductionYes
3D NR (Noise Reduction)Yes
Gain control typeAuto
Frame rate30 fps
Image quality adjustmentBrightness, Contrast, Sharpness
Full HDYes
Camera
Minimum illumination0.05 lx
Field of view (FOV) angle89.1 °
White balanceAuto
Camera shutter typeElectronic
Camera shutter speed1/5 ~ 1/16000 s
Adjustment shutter speedAuto/Manual
Image sensor
Sensor typeCMOS
Number of sensors-
Optical sensor size1/1.8 "
Progressive scanYes
Lens system
Number of lenses1
Focal length range3.6 - 10 mm
Minimum aperture number1.5
Maximum aperture number2.8
Security
Video motion detectionYes
Storage
Card reader integratedYes
Compatible memory cardsMicroSDHC, MicroSDXC
Built-in HDDNo
Maximum memory card size64 GB
Night vision
Night visionYes
Network
Wi-FiNo
Ethernet LANYes
BluetoothNo
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
Quality of Service (QoS) supportYes
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, IPv6, Bonjour
Networking standardsIEEE 802.3af
Ports & interfaces
Ethernet LAN (RJ-45) ports1
InterfaceRJ-45
Terminal block portYes
RS-422 ports1
RS-485 ports1
Composite video out1
BNC output ports1
Audio
Audio input channels1 channels
Audio output channels1 channels
Audio formats supportedG.711
Built-in microphoneYes
Weight & dimensions
Width58 mm
Depth62 mm
Height125 mm
Weight360 g
Package width200 mm
Package depth90 mm
Package height200 mm
Package weight735 g
Package typeBox
Logistics data
Master (outer) case width405 mm
Master (outer) case length367 mm
Master (outer) case height405 mm
Master (outer) case weight11760 g
Quantity per master (outer) case16 pc(s)
Harmonized System (HS) code85258900
Power
Power source typeDC, PoE
Power consumption (typical)7 W
DC output current0.6 A
DC output voltage12
Power consumption (Power over Ethernet (PoE))12.95 W
Power over Ethernet (PoE)Yes
Management features
Web browserYes
Reset buttonYes
Operational conditions
Operating temperature (T-T)10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
System requirements
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Packaging content
Number of cameras1
Resource CDYes
Technical details
IrisYes
Number of video streams2
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the LevelOne FCS-1158 below.

What is the weight of the LevelOne FCS-1158?

The LevelOne FCS-1158 has a weight of 360 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What certifications does the LevelOne FCS-1158 have?

The LevelOne FCS-1158 has the following certifications: CF/FCC.

What is the height of the LevelOne FCS-1158?

The LevelOne FCS-1158 has a height of 125 mm.

What is the width of the LevelOne FCS-1158?

The LevelOne FCS-1158 has a width of 58 mm.

What is the depth of the LevelOne FCS-1158?

The LevelOne FCS-1158 has a depth of 62 mm.

Does the LevelOne FCS-1158 support Wide Dynamic Range (WDR)?

Yes, the LevelOne FCS-1158 supports Wide Dynamic Range (WDR), which means it can capture clear images even in challenging lighting conditions, making it a great choice for indoor security monitoring.

What is the maximum resolution of the LevelOne FCS-1158?

The LevelOne FCS-1158 has a maximum resolution of 2592 x 1944 pixels, providing users with high-quality, detailed footage for surveillance purposes.

Does the LevelOne FCS-1158 have Noise Reduction features?

Yes, the LevelOne FCS-1158 has both Noise Reduction and 3D NR (Noise Reduction), ensuring that users can enjoy crisp and clear video recordings with minimal interference from background noise.

What type of mounting does the LevelOne FCS-1158 support?

The LevelOne FCS-1158 supports ceiling/wall mounting, giving users flexibility in how they choose to install and position the security camera.

What video formats are supported by the LevelOne FCS-1158?

The LevelOne FCS-1158 supports RAW video format, along with various graphics resolutions ranging from 320 x 240 to 2592 x 1944, allowing users to customize their video settings to suit their surveillance needs.

How can I adjust the compression settings of the video stream to reduce bandwidth and storage consumption?

To adjust the compression settings of the LevelOne FCS-1158 security camera's video stream for reducing bandwidth and storage consumption, follow these steps: 1. Access the Compression section in the camera's settings to define the compression settings of video stream 1 and stream 2. 2. Choose the appropriate compression method (H.264 or MJPEG) based on your requirements. 3. Set the Video Max Bit Rate to define the upper limit of the bitrate for H.264 compression. 4. Adjust the Video Bit Rate under CBR mode to specify the average bit rate for more accurate storage estimations. 5. Select the Quality level (High, Medium, or Low) for H.264 compression or define the quality with a numeric scale for MJPEG compression. 6. Optionally, adjust the GOP length under VBR mode to control the occurrence rate of I-frames, which can help minimize bandwidth and storage consumption in static scenes. 7. Remember to press Apply after making any changes to save them.

How can I enable or disable individual motion detection regions on the camera?

To enable or disable individual motion detection regions on the LevelOne FCS-1158 security camera, follow these steps: 1. Each of the 3 motion detection regions can be enabled or disabled individually. For example, you can enable region 1 while disabling regions 2 and 3. Disabled regions will not appear on the video display. 2. You can move the motion detection region anywhere on the field of view by dragging the top of the motion detection rectangle. Regions can even overlap if desired. 3. Adjust the size of the region by dragging the lower right corner of the motion detection rectangle. The maximum size can be as big as the whole screen. 4. Set the sensitivity level to distinguish actual moving targets from background movements. Higher sensitivity detects smaller shifts, while lower sensitivity allows faster movements without triggering alarms. 5. Find the right balance in sensitivity settings to avoid false alarms and detect actual intrusions effectively. The default sensitivity level is 70 on a scale of 0-100.

What is the purpose of sensitivity in motion detection, and how does it help distinguish actual moving targets from background movements?

Sensitivity in motion detection helps distinguish actual moving targets, such as people or vehicles, from background movements like leaves waving in the wind. A higher sensitivity level means that the camera requires a smaller shift in the object's position to trigger an alarm. For example, if an object moves only 1-3 pixels during two video frames, a camera with high sensitivity will still trigger an alarm, while a camera with low sensitivity will ignore such small motion. Think of sensitivity as a reversed speed limit: the lower the sensitivity, the faster objects can move undetected. The key is to find a balance where sensitivity is high enough to detect real intrusions but not so high that it triggers false alarms. The default sensitivity level for the LevelOne FCS-1158 camera is 70 on a scale of 0-100.

What are the three modes available for Day/Night control, and how does each mode function in terms of switching between day mode (color) and night mode (black/white)?

1. The LevelOne FCS-1158 security camera offers three modes for Day/Night control: Auto, Day, and Night. 2. In Auto mode, the camera automatically switches between day mode (color) and night mode (black/white based on the exposure level set by the user. 3. In Day mode, the camera remains in day mode (color) regardless of the exposure level. 4. In Night mode, the camera stays in night mode (black/white) regardless of the exposure level. 5. For cameras with built-in IR LED, there are two modes for IR LED Control: Auto and Disabled. 6. In Auto mode, the IR LED turns on automatically when switching from day to night and turns off when switching from night to day. 7. Zoom cameras with adaptive IR profile adjust the IR LED power based on zoom level in Auto mode. 8. Fixed and vari-focal lens cameras with adaptive IR profile can manually set the IR LED Strength Level from 1 to 10 for brightness control.

Is the manual of the LevelOne FCS-1158 available in English?

Yes, the manual of the LevelOne FCS-1158 is available in English .

Is your question not listed? Ask your question here

No results