View the manual for the Lescha BELLE RPC 60/80 here, for free. This manual comes under the category vibration plates and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Lescha BELLE RPC 60/80 or do you need help? Ask your question here
| Brand | Lescha |
| Model | BELLE RPC 60/80 |
| Product | vibration plate |
| EAN | 5031403403674 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Lescha BELLE RPC 60/80 below.
To troubleshoot if the engine of the Lescha BELLE RPC 60/80 vibration plate does not start, follow these steps: 1. Check the fuel level and ensure the fuel tap is open. 2. If the engine is cold, close the choke. 3. If the engine is flooded, for Honda engines, open the choke, fully open the throttle, and pull the recoil starter until the engine fires. For Hatz engines, move the speed control to stop, pull the recoil starter 5 times, then repeat the start procedure. 4. If the engine still does not start, it may indicate a major fault, and you should contact an agent or Altrad Belle for assistance.
To address the issue of the unit of the Lescha BELLE RPC 60/80 vibration plate not moving, follow these steps: 1. Compact each layer individually when there are multiple layers to be compacted on top of each other. 2. Set the throttle to idle to stop the compactor from vibrating. 3. Refer to the relevant start/stop procedure to stop the engine.
To troubleshoot if the engine of the Lescha BELLE RPC 60/80 vibration plate does not start, follow these steps: 1. Check the fuel level and ensure the fuel tap is open. 2. If the engine is cold, close the choke. 3. If the engine is flooded, for Honda engine, open the choke, fully open the throttle, and pull the recoil starter until the engine fires. For Hatz engine, move the speed control to stop, pull the recoil starter 5 times, then repeat the start procedure. 4. If the engine still does not start, it may indicate a major fault. Contact the agent or Altrad Belle for assistance. Ensure to perform these steps carefully to resolve the issue with the engine not starting on your Lescha BELLE RPC 60/80 vibration plate.
To address the issue of the unit not moving when using the Lescha BELLE RPC 60/80 vibration plate, follow these steps: 1. Check the power source and ensure the vibration plate is properly plugged in. 2. Verify that the power switch is turned on and the unit is receiving power. 3. Inspect the control settings to ensure they are correctly adjusted for operation. 4. Examine the vibration plate for any obstructions or blockages that may be preventing movement. 5. Check the condition of the vibration plate's motor and drive belt for any signs of damage. 6. If the issue persists, contact customer support for further assistance.
Yes, the manual of the Lescha BELLE RPC 60/80 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Lescha and is the answer not in the manual?
Question and answer
Number of questions: 0