Lenco Concerto DIR-2000 manual

Lenco Concerto DIR-2000
9.7 · 2
PDF manual
 · 204 pages
English
manualLenco Concerto DIR-2000
171
1
Función en espera
2
Ir al menú principal
3
Botón de menú
4
Reproductor de
música: Retroceder a
la pista
5
Reproductor de
música:
Reproducir/Pausa
6
Configurar tono
7
Botón de cursor hacia
arriba
8
Botón de cursor hacia
la izquierda
9
Confirma la selección
10
Botón de cursor hacia
la derecha
11
Botón de cursor hacia
abajo
12
Sueño y función
retardo
13
Repetir/cambiar lista
de reproducción
14
Fijar la Alarma
15
Reproductor de
música: Avanzar a la
pista
16
Reproductor de
música: Detener
17
Subir el volumen
18
Bajar el volumen
19
Enciende y apaga el
altavoz

Manual

View the manual for the Lenco Concerto DIR-2000 here, for free. This manual comes under the category radios and has been rated by 2 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Lenco Concerto DIR-2000 or do you need help? Ask your question here

Need help?

Do you have a question about the Lenco and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
N
NKJuly 22, 2020

Is there any user control of the tone? Bass/treble or an equaliser via the remote perhaps?

Lenco Concerto DIR-2000 specifications

Below you will find the product specifications and the manual specifications of the Lenco Concerto DIR-2000.

General
BrandLenco
ModelConcerto DIR-2000
Productradio
EAN8711902034780
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Lenco Concerto DIR-2000 below.

What is the difference between FM and AM?

FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

How can I best clean my radio?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I connect the Lenco Concerto DIR-2000 radio to my wireless network?

To connect the Lenco Concerto DIR-2000 radio to your wireless network, follow these steps: 1. Make sure your wireless network is active and working properly. 2. On the Lenco Concerto DIR-2000 radio, navigate to the settings menu. This can usually be done by pressing the "Menu" or "Settings" button on the radio's control panel. 3. In the settings menu, look for the "Network" or "Wi-Fi" option and select it. 4. The radio will scan for available wireless networks. Once the scan is complete, a list of networks will be displayed on the screen. 5. Select your wireless network from the list. If your network is password-protected, you will be prompted to enter the network password. Use the radio's control panel or remote to enter the password. 6. After entering the password, confirm the connection. The radio will attempt to connect to the wireless network. 7. Wait for the radio to establish a connection with the network. This may take a few moments. 8. Once the connection is established, the radio will display a confirmation message or an indicator that it is connected to the network. 9. You can now enjoy streaming music and other online features on the Lenco Concerto DIR-2000 radio through your wireless network. Note: The exact steps may vary slightly depending on the specific model and firmware version of the Lenco Concerto DIR-2000 radio.

Why is the Lenco Concerto DIR-2000 radio not connecting to the internet?

To troubleshoot why the Lenco Concerto DIR-2000 radio is not connecting to the internet, you can follow these steps: 1. Check if the WLAN (Wi-Fi) function is enabled on the radio. This can usually be done through the settings menu. 2. Try setting a static IP address on the radio. This can be done in the network settings. Make sure to enter the correct IP address, subnet mask, gateway, and DNS server information. 3. Activate the DHCP function on your router and try connecting the radio again. DHCP assigns IP addresses automatically, which can help establish a network connection. 4. Check if the firewall on your network is activated. If it is, make sure to configure it to allow access to the radio. Consult your router's manual or contact your internet service provider for assistance with firewall settings. 5. Reboot your router. Sometimes, restarting the router can resolve connectivity issues. If the above steps do not resolve the issue, it is recommended to consult the Lenco Concerto DIR-2000 radio's manual or contact Lenco customer support for further assistance.

How do I stream music from my smartphone to the Lenco Concerto DIR-2000 radio using Bluetooth?

To stream music from your smartphone to the Lenco Concerto DIR-2000 radio using Bluetooth, follow these steps: 1. Turn on the Bluetooth function on your smartphone. This can usually be done through the settings menu or by swiping down from the top of the screen and tapping on the Bluetooth icon. 2. On the Lenco Concerto DIR-2000 radio, press the "Menu" or "Settings" button to access the settings menu. 3. In the settings menu, look for the "Bluetooth" option and select it. 4. The radio will enter Bluetooth pairing mode and start searching for available devices. 5. On your smartphone, select the Lenco Concerto DIR-2000 radio from the list of available devices. The radio may be listed as "Lenco Concerto DIR-2000" or a similar name. 6. If prompted, enter a pairing code or PIN. This is usually a four-digit number, such as "0000" or "1234". Follow the on-screen instructions on your smartphone to complete the pairing process. 7. Once the pairing is successful, you can start playing music on your smartphone. The audio will be streamed to the Lenco Concerto DIR-2000 radio via Bluetooth. Note: The exact steps may vary slightly depending on the operating system and version of your smartphone. Make sure to consult your smartphone's user manual or contact the manufacturer for specific instructions if needed.

Why is the Bluetooth connection between my device and the Lenco Concerto DIR-2000 radio unstable?

If the Bluetooth connection between your device and the Lenco Concerto DIR-2000 radio is unstable, you can try the following steps to troubleshoot the issue: 1. Make sure that your device and the radio are within close proximity to each other. Bluetooth connections have a limited range, typically around 10 meters, so ensure that there are no obstacles or interference between the two devices. 2. Check if there are any other Bluetooth devices nearby that may be causing interference. Other devices operating on the same frequency can disrupt the Bluetooth connection. Move away from other devices or turn them off temporarily to see if it improves the stability. 3. Ensure that both your device and the radio have sufficient battery power. Low battery levels can affect the Bluetooth connection quality. Charge both devices if necessary. 4. Restart both your device and the radio. Sometimes, a simple restart can resolve connectivity issues. 5. If possible, update the firmware or software on both your device and the radio. Manufacturers often release updates to improve Bluetooth performance and stability. 6. If the issue persists, try unpairing and re-pairing your device with the radio. Delete the existing Bluetooth pairing on both devices and go through the pairing process again. If the above steps do not resolve the issue, it is recommended to consult the Lenco Concerto DIR-2000 radio's manual or contact Lenco customer support for further assistance.

Why am I not able to receive any FM radio stations on the Lenco Concerto DIR-2000 radio?

If you are not able to receive any FM radio stations on the Lenco Concerto DIR-2000 radio, you can try the following troubleshooting steps: 1. Check the FM aerial connection. Ensure that the aerial is properly connected to the radio and positioned correctly for optimal reception. Adjust the position of the aerial if needed. 2. Move the radio to a different location. Sometimes, the radio's position can affect the reception. Try placing the radio in a different area, away from any obstructions or interference. 3. Rescan for FM stations. In the radio's settings menu, look for the option to rescan or search for FM stations. Select this option to initiate a new scan and see if any stations are detected. 4. Check the local FM coverage. It is possible that there may be limited FM coverage in your area. Consult the manual or contact your local radio station to verify the availability of FM stations in your location. If the issue persists, it is recommended to consult the Lenco Concerto DIR-2000 radio's manual or contact Lenco customer support for further assistance.

Is the manual of the Lenco Concerto DIR-2000 available in English?

Yes, the manual of the Lenco Concerto DIR-2000 is available in English .

Is your question not listed? Ask your question here

No results