Ledlenser NEO4 manual

Ledlenser NEO4
7.3 · 2
PDF manual
 · 2 pages
English
manualLedlenser NEO4

NEO4/NEO6R

8
6
Ledlenser GmbH & Co. KG
Kronenstr. 5-7 • 42699 Solingen • Germany
Phone +49 212/5948-0 Fax +49 212/5948-200
info@ledlenser.com
Hold
8sec
Power
3xBlink
+
O
+
O
Hold
8sec
NEO4/NEO6R_V.01
28.11.2017
1J12A0198
www.ledlenser.com
O
9
10
Hold
5sec
run time
light output
run time
light output
Energy Saving Mode Constant Current Mode
1xBlink
2xBlink
2.
1.
7
-
+
-
+
-
+
5sec
NEO4NEO6R
4.
5.
3.

Manual

View the manual for the Ledlenser NEO4 here, for free. This manual comes under the category torches and has been rated by 2 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Ledlenser NEO4 or do you need help? Ask your question here

Need help?

Do you have a question about the Ledlenser and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ledlenser NEO4 specifications

Below you will find the product specifications and the manual specifications of the Ledlenser NEO4.

The Ledlenser NEO4 is a headband flashlight designed for night running, offering a waterproof feature up to 1 meter and a shockproof capability up to the same distance. Constructed with polycarbonate (PC) material, this lightweight torch weighs 66 grams (excluding battery) and features an on/off switch controlled by buttons. Equipped with a single LED lamp, the NEO4 provides a minimum light output of 20 lumens, ensuring visibility during nighttime activities. Additionally, LED indicators are incorporated into the design for user convenience. The virtually non-glare optics and swivel-mounted headlamp of the Ledlenser NEO4 provide optimal lighting for safe and efficient night running. The torch's Constant Current Mode ensures a consistent level of illumination throughout your route. This high-quality design offers a reliable lighting solution for outdoor activities, with a focus on functionality and durability. The Ledlenser NEO4 is a practical choice for individuals seeking a dependable headband flashlight for nighttime use.

General
BrandLedlenser
ModelNEO4 | 500914
Producttorch
EAN4058205010375
LanguageEnglish
FiletypeUser manual (PDF)
Design
Flashlight typeHeadband flashlight
Product colorBlue, Grey, White
Housing materialPolycarbonate (PC)
Control typeButtons
On/off switchYes
LED indicatorsYes
Features
WaterproofYes
Waterproof up to1 m
Operating temperature (T-T)-20 - 40 °C
ShockproofYes
Shockproof up to1 m
International Protection (IP) codeIP57
Technical details
Weight (excluding battery)66 g
Lighting
Lamp typeLED
Lamps quantity1 lamp(s)
Light output (min)20 lm
Light output (max)240 lm
Color temperature7500 K
Light beam distance (min)10 m
Light beam distance (max)30 m
Number of power levels3
Light colorWhite
Color Rendering Index (CRI)70
Weight & dimensions
Weight100 g
Head diameter70 mm
Packaging data
Package width100 mm
Package depth120 mm
Package height65 mm
Package weight199 g
Package typeHanging box
Power
Number of batteries supported3
Battery typeAAA
Battery technologyAlkaline
Battery life (max)40 h
Battery life (boost mode)3 h
Battery voltage1.5 V
Rechargeable batteryNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ledlenser NEO4 below.

What is the weight of the Ledlenser NEO4?

The Ledlenser NEO4 has a weight of 100 g.

Is the Led Lenser NEO4 a headband flashlight?

Yes, the Led Lenser NEO4 is a headband flashlight. This means that it is designed to be worn on the head, providing hands-free lighting for the user.

Is the Led Lenser NEO4 waterproof?

Yes, the Led Lenser NEO4 is waterproof. It can withstand being submerged in water up to a depth of 1 meter. This feature makes it suitable for outdoor activities in wet conditions.

Is the housing material of the Led Lenser NEO4 made of Polycarbonate (PC)?

Yes, the housing material of the Led Lenser NEO4 is made of Polycarbonate (PC). This material is known for its durability and impact resistance, ensuring that the flashlight can withstand everyday use and occasional drops.

Does the Led Lenser NEO4 have buttons for control?

Yes, the Led Lenser NEO4 has buttons for control. This allows for easy and convenient operation of the flashlight, giving the user the ability to switch between different modes and adjust settings.

How far can the light beam of the Led Lenser NEO4 reach?

The light beam distance of the Led Lenser NEO4 can reach a minimum of 10 meters and a maximum of 30 meters. This provides a decent range of illumination, making it suitable for various tasks and activities in both indoor and outdoor settings.

How do I switch between different power modes on the Led Lenser NEO4 torch?

To switch between different power modes on the Led Lenser NEO4 torch, follow these steps: 1. Press and hold the power button for approximately 1 second to turn on the torch. 2. Once the torch is turned on, press the power button again to cycle through the different power modes. 3. Each press of the power button will switch the torch to a different power mode. 4. Continue pressing the power button until you reach the desired power mode. 5. The available power modes may include energy-saving mode, constant current mode, and different light outputs. 6. To turn off the torch, press and hold the power button for approximately 5 seconds. By following these steps, you can easily switch between different power modes on the Led Lenser NEO4 torch.

Why is the Led Lenser NEO4 torch not turning on?

If the Led Lenser NEO4 torch is not turning on, you can try the following steps: 1. Check the battery: Ensure that the batteries are properly inserted into the torch and that they have enough charge. If the batteries are low or depleted, replace them with fresh 1.5V AAA batteries. 2. Check the battery contacts: Make sure that the battery contacts inside the torch are clean and free from any dirt or corrosion. If there is any buildup, gently clean the contacts using a soft cloth or cotton swab. 3. Press and hold the power button: Sometimes, the torch may require a longer press of the power button to turn on. Press and hold the power button for approximately 5 seconds to see if the torch powers on. 4. Check for any damage: Inspect the torch for any visible damage, such as a cracked lens or loose parts. If there is any damage, it may be necessary to contact the manufacturer for further assistance. If the torch still does not turn on after following these steps, it is recommended to contact Led Lenser customer support for further troubleshooting or to inquire about warranty options.

How long does the battery of the Led Lenser NEO4 torch last on different power modes?

The Led Lenser NEO4 torch has different power modes that affect the battery life. Unfortunately, the specific battery life for each power mode is not mentioned in the available manual. However, the manual does mention two power modes: Energy Saving Mode and Constant Current Mode. To switch between power modes, you can follow these steps: 1. Press and hold the power button for approximately 1 second to turn on the torch. 2. Once the torch is turned on, press the power button again to cycle through the different power modes. 3. Each press of the power button will switch the torch to a different power mode. 4. Continue pressing the power button until you reach the desired power mode. While the manual does not provide exact battery life information for each power mode, it is generally expected that the Energy Saving Mode will provide a longer battery life compared to the Constant Current Mode. The actual battery life may vary depending on factors such as battery quality, usage patterns, and environmental conditions.

What are the dimensions and weight of the Led Lenser NEO4 torch?

The dimensions and weight of the Led Lenser NEO4 torch are not explicitly mentioned in the available manual. However, based on the information provided in the manual, we can infer that the NEO4 torch is compact and lightweight. Unfortunately, the specific dimensions and weight are not provided in the manual. It is recommended to refer to the product packaging or contact Led Lenser customer support for accurate information regarding the dimensions and weight of the NEO4 torch. Please note that the information provided is based on the available manual and may not cover all aspects of the product's dimensions and weight.

Can I use rechargeable batteries with the Led Lenser NEO4 torch?

Yes, you can use rechargeable batteries with the Led Lenser NEO4 torch. The manual mentions that the NEO4 torch uses 1.5V AAA batteries. Rechargeable AAA batteries are typically 1.2V, which is slightly lower than the standard alkaline batteries. However, rechargeable batteries should still work with the NEO4 torch. To use rechargeable batteries with the NEO4 torch, follow these steps: 1. Ensure that you have fully charged rechargeable AAA batteries available. 2. Open the battery compartment of the NEO4 torch according to the instructions in the manual. 3. Insert the fully charged rechargeable AAA batteries into the battery compartment, following the correct polarity (+/-) indicated. 4. Close the battery compartment securely. 5. Press and hold the power button for approximately 1 second to turn on the torch. 6. The NEO4 torch should now be powered on and ready to use with the rechargeable batteries. By following these steps, you can use rechargeable batteries with the Led Lenser NEO4 torch for a more sustainable and cost-effective power source.

Is the manual of the Ledlenser NEO4 available in English?

Yes, the manual of the Ledlenser NEO4 is available in English .

Is your question not listed? Ask your question here

No results