Kubota SCL1000 manual

Kubota SCL1000
8.2 · 4
PDF manual
 · 82 pages
English
manualKubota SCL1000
Section 5: Maintenance & Lubrication
SCL1000 Stand-on Compact Loader 725-137MK6/30/21
53

Table of Contents

Check Coolant Level
!

WARNING

To avoid serious injury or death:
The following procedure should be performed with the
machine on a flat, level surface, the loader arms completely
lowered and the machine turned off. Use all the appropriate
personal protective equipment when performing maintenance.
Refer to Figure 5-14:
1. Open the waist cushion. See “Opening & Closing
the Waist Cushion” on page 48.
2. Check to see that the coolant level is between the
“FULL” and “LOW” marks of recovery tank (#1).
3. If coolant needs to be added to recovery tank (#1),
open up the control panel. See “Opening & Closing
the Control Panel” on page 48. Remove recovery
tank lid (#2). Use a clean funnel if necessary.

When the coolant level drops due to evaporation,

add water only up to the full level.

In case of leakage, add anti-freeze and water in the

specified mixing ratio up to the full level.
4. Replace recovery tank lid (#2).
NOTE: For better accuracy, allow for the machine to
cool down sufficiently if it has been in operation.
NOTE: Coolant may evaporate over a long period
of time. However, if coolant level goes down
significantly in a short period of time, it is likely
because of one of the following:
Improper refill in which bubbles that are not bled
out initially have worked their way up to the
recovery tank and coolant has sufficiently
resupplied the radiator to fill the voids.
Leaks should be identified and fixed immediately.
Overheating in which the coolant has expanded
enough to fill the recovery tank and even overflow
out of the overflow hose. When everything cools
down, the coolant level in the recovery tank draws
back down, possibly below the "low" line on the
recovery tank. In this case the overheating
problem needs to be fixed immediately.
IMPORTANT: Do not over fill the recovery tank. Fill
only to the “FULL” line on the tank.
IMPORTANT: Do not fill the recovery tank with dirty
or salty water.
Coolant Level Fill
Figure 5-14
Check Grease Points
!

WARNING

To avoid serious injury or death:
The following procedure should be performed with the
machine on a flat, level surface, the loader arms completely
lowered and the machine turned off.
Refer to “Lubrication Points” on page 70
In general, the machine should be greased daily. It is also
good practice to grease the machine immediately after it
has been washed and at the end of the day if it has been
exposed to water while operating.
1. Locate the machine’s grease zerks and wipe them
clean with a rag. See “Lubrication Points” on page
70 for grease zerk locations.
2. One by one, with a grease gun, pump grease into the
grease zerks until you see excess grease ooze out
(Typically 3-4 pumps).
3. Wipe away excess grease with a rag.
2
72970
1
Overflow Hose
IMPORTANT: Replace missing or damaged grease
zerks immediately.

View the manual for the Kubota SCL1000 here, for free. This manual comes under the category lawnmowers and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Kubota SCL1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Kubota and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
IsraelOctober 20, 2023

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in
zoom-in
View photo

The Kubota SCL1000 is a lawnmower designed for efficient mowing of large areas. It features a powerful engine that provides reliable performance and ensures smooth operation. The lawnmower is equipped with a wide cutting deck, allowing for quick and efficient mowing, reducing the time required to complete the task. The SCL1000 is built with premium materials, ensuring durability and longevity. Its sturdy construction enables it to withstand tough conditions and heavy usage without compromising its performance. The lawnmower is designed for comfort, with adjustable seating positions and ergonomic controls, allowing the operator to maintain a comfortable position during operation. The Kubota SCL1000 is equipped with advanced technological features that contribute to its efficiency. It incorporates a cutting-edge cutting system that ensures a consistent and clean cut, leaving a well-manicured lawn behind. The lawnmower also includes safety features such as automatic shut-off and blade engagement, ensuring the operator's safety during operation. In summary, the Kubota SCL1000 is a high-quality lawnmower that offers powerful performance, durability, and efficiency. Its advanced features and sturdy construction make it an excellent choice for mowing large areas, providing a reliable and comfortable experience for the operator.

General
BrandKubota
ModelSCL1000
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota SCL1000 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why won't my Kubota SCL1000 lawnmower start?

Check if the fuel tank is filled with gasoline, the ignition switch is turned on, and the engine control lever is set to the correct position.

How do I adjust the cutting height on my Kubota SCL1000 lawnmower?

Locate the cutting height adjustment lever on the deck of the lawnmower and move it to the desired cutting height position.

What should I do if my Kubota SCL1000 lawnmower is not cutting the grass evenly?

Ensure that the mower blades are sharp and properly installed. If the issue persists, consider adjusting the deck level or inspecting the grass discharge chute for any blockages.

What could be causing excessive vibration in my Kubota SCL1000 lawnmower?

Check if the cutting blades are balanced and securely fastened. If they are damaged or bent, they may need to be replaced.

How do I clean the air filter on my Kubota SCL1000 lawnmower?

Locate the air filter housing, remove the cover, and take out the air filter. Clean the filter using compressed air or gently wash it with mild soap and warm water. Allow it to dry completely before reinstalling.

Is the manual of the Kubota SCL1000 available in English?

Yes, the manual of the Kubota SCL1000 is available in English .

Is your question not listed? Ask your question here

No results