Kubota SCL1000 manual

Kubota SCL1000
8.2 · 4
PDF manual
 · 82 pages
English
manualKubota SCL1000
Section 4: Transporting
SCL1000 Stand-on Compact Loader 725-137MK6/30/21
45

Table of Contents

Moving Inoperable Machine

!

WARNING

To avoid serious injury or death:

Pull the machine only from both rear tie-downs or from

front D ring.

Use a tow chain or tow rope and hardware that is rated at

least 1.5 times the machine weight.

Be aware that when the hydrostats are bypassed, the

machine can begin to move if it is not on flat surface.
Refer to Figure 4-8:
1. Shut the machine down. See “SCL Shutdown
Procedure” on page 19.
2. Open the hood of the machine.
3. Use a wrench or a socket and ratchet to loosen
bypass plugs (A & B) on the hydrostat. Do not loosen
more than 2 full turns.
4. Disengage the park brake by loosening the retaining
bolt and jam nut. Push the park brake in until it clears
the drive sprocket.
5. Only use tow chains, ropes or straps that are rated at
least 1.5 times the machine weight.
6. Pull the machine from the rear two tie-down points or
from the D-ring located on the front of the machine.
7. Pull the machine at 1-2 mph (1.6-3.2 km/h).
8. Remember to tighten bypass plugs (A & B) when
repairs on the machine have been completed.
9. Remember to restore park brake to its original
position by pulling it out as far as it can go so that it
engages with the sprocket teeth. Tighten the
retaining bolt and jam nut.
IMPORTANT: Do not pull the machine without
putting the hydrostats into bypass, otherwise
damage to the hydraulic drive or track system will
occur.
Follow the instructions below for proper procedures
for putting the hydrostats into bypass. Contact your
Kubota dealer for more information.
IMPORTANT: Do not tow long distances. Tow at a
walking speed or at 1-2 mph (1.6-3.2 km/h).
IMPORTANT: The hardware used on the chains,
ropes or straps should also be rated at 1.5 times the
machines weight.
Hydrostat Bypass
Figure 4-8
A
B
Hydrostat
*Shown In Larger Scale For Clarity
72936
72938

View the manual for the Kubota SCL1000 here, for free. This manual comes under the category lawnmowers and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Kubota SCL1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Kubota and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
IsraelOctober 20, 2023

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in
zoom-in
View photo

The Kubota SCL1000 is a lawnmower designed for efficient mowing of large areas. It features a powerful engine that provides reliable performance and ensures smooth operation. The lawnmower is equipped with a wide cutting deck, allowing for quick and efficient mowing, reducing the time required to complete the task. The SCL1000 is built with premium materials, ensuring durability and longevity. Its sturdy construction enables it to withstand tough conditions and heavy usage without compromising its performance. The lawnmower is designed for comfort, with adjustable seating positions and ergonomic controls, allowing the operator to maintain a comfortable position during operation. The Kubota SCL1000 is equipped with advanced technological features that contribute to its efficiency. It incorporates a cutting-edge cutting system that ensures a consistent and clean cut, leaving a well-manicured lawn behind. The lawnmower also includes safety features such as automatic shut-off and blade engagement, ensuring the operator's safety during operation. In summary, the Kubota SCL1000 is a high-quality lawnmower that offers powerful performance, durability, and efficiency. Its advanced features and sturdy construction make it an excellent choice for mowing large areas, providing a reliable and comfortable experience for the operator.

General
BrandKubota
ModelSCL1000
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota SCL1000 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why won't my Kubota SCL1000 lawnmower start?

Check if the fuel tank is filled with gasoline, the ignition switch is turned on, and the engine control lever is set to the correct position.

How do I adjust the cutting height on my Kubota SCL1000 lawnmower?

Locate the cutting height adjustment lever on the deck of the lawnmower and move it to the desired cutting height position.

What should I do if my Kubota SCL1000 lawnmower is not cutting the grass evenly?

Ensure that the mower blades are sharp and properly installed. If the issue persists, consider adjusting the deck level or inspecting the grass discharge chute for any blockages.

What could be causing excessive vibration in my Kubota SCL1000 lawnmower?

Check if the cutting blades are balanced and securely fastened. If they are damaged or bent, they may need to be replaced.

How do I clean the air filter on my Kubota SCL1000 lawnmower?

Locate the air filter housing, remove the cover, and take out the air filter. Clean the filter using compressed air or gently wash it with mild soap and warm water. Allow it to dry completely before reinstalling.

Is the manual of the Kubota SCL1000 available in English?

Yes, the manual of the Kubota SCL1000 is available in English .

Is your question not listed? Ask your question here

No results