Kubota SCL1000 manual

Kubota SCL1000
8.2 · 4
PDF manual
 · 82 pages
English
manualKubota SCL1000
Section 3: Operating
SCL1000 Stand-on Compact Loader 725-137MK6/30/21
39

Table of Contents

Prohibited Water Depth
Figure 3-37
Permissible Water Depth
Figure 3-36
Prohibited Actions
!

WARNING

To avoid serious injury or death:

Take care when operating, transporting material or

traveling in snowy conditions or on ice as tracks may slip.
DO NOT Submerge This Machine In Water
IMPORTANT: Always avoid sudden changes in
direction, or spinning on concrete surfaces.
Excessive friction on the tracks will cause them to
wear out or become damaged.
IMPORTANT: Always avoid sudden impact to the
tracks such as allowing the machine to drop down or
hit objects.
IMPORTANT: Chemicals such as salt, potassium
chloride, ammonium sulfate, potassium sulfate, etc.,
can damage the track belts. If the tracks are
exposed to any of these substances, immediately
wash thoroughly with water.
IMPORTANT: Avoid scraping the rubber tracks
along concrete, and other rough surfaces.
IMPORTANT: Operate machine between -4
o
F to
113
o
F (-20
o
C and +45
o
C) for proper functioning of
rubber track belts.
Preventing Slippage of Rubber Tracks
Always do the following to prevent slippage of rubber
tracks:
IMPORTANT: If machine must be stored for 3
months or longer, keep it indoors and out of direct
sunlight to prevent UV exposure on rubber or plastic
components.
IMPORTANT: Never move, transport material or
operate the machine in the following places:
Deep mud, broken stone, jagged or unstable base
rock, iron beams, iron scraps, iron sheets, etc.
Navigating, turning and moving the machine over
sharp material may damage or break the tracks.
IMPORTANT: Do not travel on riverbeds and other
areas where loose gravel can get into the tracks,
causing them to slip off or become damaged.
IMPORTANT: Do not use near the oceanfront where
salt water can corrode the various parts of the
machine.
IMPORTANT: Always prevent fuel, oil, salt or other
chemical agents from getting on the tracks, which
can cause corrosion to the metal track cores. If the
track or undercarriage parts are exposed to such
material, immediately remove by using water.
IMPORTANT: Always avoid traveling on roads
directly after they have been resurfaced or other hot
surfaces such as fire or metal surfaces under direct
sunlight. Excessive heat can cause irregular wear
and damage to tracks.
IMPORTANT: Do not attempt to move material
where the surface is unstable and could cause
slippage in the tracks. Unnecessary and excessive
slipping of tracks will damage and cause abnormal
wearing of the tracks.
IMPORTANT: Make sure tracks are kept at the
proper tension. Never change directions when there
is excessive slack in the track belts.
IMPORTANT: When ascending an incline, never
change direction at the base of the incline.
IMPORTANT: Always avoid operating the machine
with one track on a different surface than the other
track, or with one track partially on an incline. Make
sure both tracks are on stable, firm surfaces when in
motion.

View the manual for the Kubota SCL1000 here, for free. This manual comes under the category lawnmowers and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Kubota SCL1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Kubota and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
IsraelOctober 20, 2023

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in
zoom-in
View photo

The Kubota SCL1000 is a lawnmower designed for efficient mowing of large areas. It features a powerful engine that provides reliable performance and ensures smooth operation. The lawnmower is equipped with a wide cutting deck, allowing for quick and efficient mowing, reducing the time required to complete the task. The SCL1000 is built with premium materials, ensuring durability and longevity. Its sturdy construction enables it to withstand tough conditions and heavy usage without compromising its performance. The lawnmower is designed for comfort, with adjustable seating positions and ergonomic controls, allowing the operator to maintain a comfortable position during operation. The Kubota SCL1000 is equipped with advanced technological features that contribute to its efficiency. It incorporates a cutting-edge cutting system that ensures a consistent and clean cut, leaving a well-manicured lawn behind. The lawnmower also includes safety features such as automatic shut-off and blade engagement, ensuring the operator's safety during operation. In summary, the Kubota SCL1000 is a high-quality lawnmower that offers powerful performance, durability, and efficiency. Its advanced features and sturdy construction make it an excellent choice for mowing large areas, providing a reliable and comfortable experience for the operator.

General
BrandKubota
ModelSCL1000
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota SCL1000 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why won't my Kubota SCL1000 lawnmower start?

Check if the fuel tank is filled with gasoline, the ignition switch is turned on, and the engine control lever is set to the correct position.

How do I adjust the cutting height on my Kubota SCL1000 lawnmower?

Locate the cutting height adjustment lever on the deck of the lawnmower and move it to the desired cutting height position.

What should I do if my Kubota SCL1000 lawnmower is not cutting the grass evenly?

Ensure that the mower blades are sharp and properly installed. If the issue persists, consider adjusting the deck level or inspecting the grass discharge chute for any blockages.

What could be causing excessive vibration in my Kubota SCL1000 lawnmower?

Check if the cutting blades are balanced and securely fastened. If they are damaged or bent, they may need to be replaced.

How do I clean the air filter on my Kubota SCL1000 lawnmower?

Locate the air filter housing, remove the cover, and take out the air filter. Clean the filter using compressed air or gently wash it with mild soap and warm water. Allow it to dry completely before reinstalling.

Is the manual of the Kubota SCL1000 available in English?

Yes, the manual of the Kubota SCL1000 is available in English .

Is your question not listed? Ask your question here

No results