Kubota SCL1000 manual

Kubota SCL1000
8.2 · 4
PDF manual
 · 82 pages
English
manualKubota SCL1000
Section 3: Operating
SCL1000 Stand-on Compact Loader 725-137MK6/30/21
33

Table of Contents

Loader Handle Operation

Refer to Figure 3-29:
!

WARNING

To avoid serious injury or death:

Do not exceed the rated operating capacity of the machine.

If operating a bucket, or other lifting attachments, be

careful not to tilt the bucket/attachment all the way back
when the loader arms are raised all the way up. Material
could fall back onto the Operator.
Tilt the attachment forward by slowly moving the
loader handle to the right.
Tilt the attachment backward by slowly moving the
loader handle to the left.
Lower the loader arms by slowly moving the
loader handle forward.
Raise the loader arms by slowly moving the
loader handle backward.
To operate the loader arms and tilt at the same time,
maneuverer the loader handle toward positions
5, 6, 7 or 8. See Figure 3-29.
Float Function
Refer to Figure 3-29:
!

WARNING

To avoid serious injury or death:
Make sure the attachment is lowered to the ground before
putting lift arms in "FLOAT" position. Putting the lift arms in
"FLOAT" position while they are off the ground will cause the
attachment and lift arms to fall.
Grading attachments should be operated in float
function. The float function allows the attachment to
follow the contours of the ground. Read the following
instructions for operating the float function.
1. Lower the attachment to the ground then press float
button (#11) to engage float function. Proceed to
operate attachment.
2. To exit float function, either press float button (#11) or
pull back on the loader handle to raise the loader
arms and exit the float function. See Float” on page
24 for additional information on the float function.
Auxiliary Hydraulics
Refer to Figure 3-29:
!

WARNING

To avoid serious injury or death:

Wear protective gloves and safety glasses or goggles when

working with hydraulic systems. Hydraulic fluid under
pressure can penetrate skin. Use a piece of cardboard or
wood rather than hands when searching for hydraulic leaks.
If hydraulic fluid is injected into the skin, it must be treated
by a doctor within a few hours or gangrene may result.

Stop the engine and relieve hydraulic pressure before

connecting or disconnecting hydraulic lines.
Some attachments require auxiliary hydraulic power to
operate. Read the following instructions and notes on
how to operate the auxiliary hydraulics.
Press and hold button (#9) to operate auxiliary hydraulics
in a forward direction or press button (#10) to operate the
auxiliary hydraulics in a reverse direction. Release the
button to cut off auxiliary hydraulic flow.
Auxiliary hydraulic speed can be controlled by increasing
or decreasing engine throttle and also by how deep the
buttons are pressed (press button all the way down for full
flow. Button response can be adjusted. See “Auxiliary
Flow Screen” on page 26.
Auxiliary Hold Mode
Maintain auxiliary hydraulic power without holding a
button with auxiliary hold mode. This function can be
activated from the monitor. See “Auxiliary Hold Mode
on page 24.
Loader Handle Functions
Figure 3-29
8
1
5
4
3
7
6
2
72831
9
10
11
72832
1. Lower arms
2. Raise arms
3. Tilt forward
4. Tilt back
5. Lower arms/tilt forward
6. Raise arms/tilt forward
7. Raise arms/tilt back
8. Lower arms/tilt back
9. Forward hydraulic flow
10. Reverse hydraulic flow
11. Float

View the manual for the Kubota SCL1000 here, for free. This manual comes under the category lawnmowers and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Kubota SCL1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Kubota and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
IsraelOctober 20, 2023

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in
zoom-in
View photo

The Kubota SCL1000 is a lawnmower designed for efficient mowing of large areas. It features a powerful engine that provides reliable performance and ensures smooth operation. The lawnmower is equipped with a wide cutting deck, allowing for quick and efficient mowing, reducing the time required to complete the task. The SCL1000 is built with premium materials, ensuring durability and longevity. Its sturdy construction enables it to withstand tough conditions and heavy usage without compromising its performance. The lawnmower is designed for comfort, with adjustable seating positions and ergonomic controls, allowing the operator to maintain a comfortable position during operation. The Kubota SCL1000 is equipped with advanced technological features that contribute to its efficiency. It incorporates a cutting-edge cutting system that ensures a consistent and clean cut, leaving a well-manicured lawn behind. The lawnmower also includes safety features such as automatic shut-off and blade engagement, ensuring the operator's safety during operation. In summary, the Kubota SCL1000 is a high-quality lawnmower that offers powerful performance, durability, and efficiency. Its advanced features and sturdy construction make it an excellent choice for mowing large areas, providing a reliable and comfortable experience for the operator.

General
BrandKubota
ModelSCL1000
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota SCL1000 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why won't my Kubota SCL1000 lawnmower start?

Check if the fuel tank is filled with gasoline, the ignition switch is turned on, and the engine control lever is set to the correct position.

How do I adjust the cutting height on my Kubota SCL1000 lawnmower?

Locate the cutting height adjustment lever on the deck of the lawnmower and move it to the desired cutting height position.

What should I do if my Kubota SCL1000 lawnmower is not cutting the grass evenly?

Ensure that the mower blades are sharp and properly installed. If the issue persists, consider adjusting the deck level or inspecting the grass discharge chute for any blockages.

What could be causing excessive vibration in my Kubota SCL1000 lawnmower?

Check if the cutting blades are balanced and securely fastened. If they are damaged or bent, they may need to be replaced.

How do I clean the air filter on my Kubota SCL1000 lawnmower?

Locate the air filter housing, remove the cover, and take out the air filter. Clean the filter using compressed air or gently wash it with mild soap and warm water. Allow it to dry completely before reinstalling.

Is the manual of the Kubota SCL1000 available in English?

Yes, the manual of the Kubota SCL1000 is available in English .

Is your question not listed? Ask your question here

No results