Kubota SCL1000 manual

Kubota SCL1000
8.2 · 4
PDF manual
 · 82 pages
English
manualKubota SCL1000
Section 3: Operating
SCL1000 Stand-on Compact Loader 725-137MK6/30/21
19

Table of Contents

2. Turn the helping machine off.
3. Wear eye protection and rubber gloves.
4. Ensure vent caps are securely in place (if equipped).
5. Connect red jumper cable to positive (+) terminal of
the low battery then connect the other end to the
positive (+) terminal of the auxiliary battery.
6. Connect the black jumper cable to the negative (-)
terminal of the auxiliary battery then connect the
other end to a conductive part of the machine frame
(bare metal) as far away as possible from the low
battery.
7. Start the engine of the helping machine and let it run
for a while. Start the machine with the low battery.
8. Disconnect the jumper cables in the reverse
sequence.
Auxiliary Battery Hook-up
Figure 3-3

Shutting Off The Engine

!

WARNING

To avoid serious injury or death:

Before shutting engine off, fully lower loader arms. Do not

keep the bucket or attachment in the raised position, the
levers could accidentally be activated and cause serious
accidents.

Place the machine on flat level ground.

IMPORTANT: The machines must not come in
contact with each other.
IMPORTANT: Do not connect the black jumper
cable to the negative (-) terminal of the machine
battery.
IMPORTANT: This machine has a negative (-)
ground 12 Volt starting system. Only use the same
voltage when using an auxiliary battery. Using a
higher voltage will cause serious damage to the
electrical system. When using an auxiliary battery,
only the compatible (same) voltage is permissible.
SCL Shutdown Procedure
The following are basic stand-on compact loader
shutdown procedures. Follow these procedures before
leaving the operator platform.
1. Park on solid, level ground.
2. Reduce engine speed.
3. Shut-off auxiliary power to attachment (if applicable).
4. Lower the loader arms and attachment (if applicable)
until it is flat on the ground or on non-concrete
support blocks.
5. Press the middle button on the control monitor to stop
the engine, and turn the power switch off.
6. Wait for all components to come to a complete stop
before leaving the operator platform.
IMPORTANT: Let the engine idle at low throttle for 1-
2 minutes before shutting engine off. This helps cool
the engine before shutting off. In the case of an
emergency you can shut the engine off immediately
by turning off the power switch.

View the manual for the Kubota SCL1000 here, for free. This manual comes under the category lawnmowers and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Kubota SCL1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Kubota and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
IsraelOctober 20, 2023

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in

How do i input number code when i turn on machine it has acode i just cant seem to find numbers or how to get them in
zoom-in
View photo

The Kubota SCL1000 is a lawnmower designed for efficient mowing of large areas. It features a powerful engine that provides reliable performance and ensures smooth operation. The lawnmower is equipped with a wide cutting deck, allowing for quick and efficient mowing, reducing the time required to complete the task. The SCL1000 is built with premium materials, ensuring durability and longevity. Its sturdy construction enables it to withstand tough conditions and heavy usage without compromising its performance. The lawnmower is designed for comfort, with adjustable seating positions and ergonomic controls, allowing the operator to maintain a comfortable position during operation. The Kubota SCL1000 is equipped with advanced technological features that contribute to its efficiency. It incorporates a cutting-edge cutting system that ensures a consistent and clean cut, leaving a well-manicured lawn behind. The lawnmower also includes safety features such as automatic shut-off and blade engagement, ensuring the operator's safety during operation. In summary, the Kubota SCL1000 is a high-quality lawnmower that offers powerful performance, durability, and efficiency. Its advanced features and sturdy construction make it an excellent choice for mowing large areas, providing a reliable and comfortable experience for the operator.

General
BrandKubota
ModelSCL1000
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota SCL1000 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why won't my Kubota SCL1000 lawnmower start?

Check if the fuel tank is filled with gasoline, the ignition switch is turned on, and the engine control lever is set to the correct position.

How do I adjust the cutting height on my Kubota SCL1000 lawnmower?

Locate the cutting height adjustment lever on the deck of the lawnmower and move it to the desired cutting height position.

What should I do if my Kubota SCL1000 lawnmower is not cutting the grass evenly?

Ensure that the mower blades are sharp and properly installed. If the issue persists, consider adjusting the deck level or inspecting the grass discharge chute for any blockages.

What could be causing excessive vibration in my Kubota SCL1000 lawnmower?

Check if the cutting blades are balanced and securely fastened. If they are damaged or bent, they may need to be replaced.

How do I clean the air filter on my Kubota SCL1000 lawnmower?

Locate the air filter housing, remove the cover, and take out the air filter. Clean the filter using compressed air or gently wash it with mild soap and warm water. Allow it to dry completely before reinstalling.

Is the manual of the Kubota SCL1000 available in English?

Yes, the manual of the Kubota SCL1000 is available in English .

Is your question not listed? Ask your question here

No results