Kubota MX5400 manual

Kubota MX5400
7 · 1
PDF manual
 · 172 pages
English
manualKubota MX5400

SAFE OPERATION

Careful operation is your best insurance against an
accident.
Read and understand this manual carefully before
operating the tractor.
All operators, no matter how much experience they
have, should read this and other related manuals
before operating the tractor or any implement attached
to it. It is the owner's obligation to instruct all operators
in safe operation.

PRECAUTIONS BEFORE

OPERATING THE TRACTOR

Know your equipment and its limitations.
Read this entire manual before starting and operating
the tractor.
1. General precautions
Pay special attention to the safety labels on the
tractor.
Do not operate the tractor or any implement
attached to the tractor while under the influence of
alcohol, medication, controlled substances, or while
you are fatigued.
Before allowing other people to use your tractor,
explain them how to operate it and require them to
read this manual before operating it.
Never wear loose, torn, or bulky clothing around the
tractor. Loose, torn, or bulky clothing may catch on
moving parts or controls, leading to the risk of an
accident. Use additional safety items: hard hat,
safety boots or shoes, eye and hearing protection,
gloves, and so on, as appropriate or required.
Do not allow passengers to ride on any part of the
tractor at any time. The operator must remain in the
tractor seat during operating the tractor.
Check brakes, clutch, linkage pins, and other
mechanical parts for improper adjustment and
wear. Replace worn or damaged parts promptly.
Check the tightness of all nuts and bolts regularly.
(For further details, see SERVICE INTERVALS on
page 115)
Keep your tractor clean. Buildup of dirt, grease, and
trash may contribute to fires and lead to personal
injury.
Use only implements meeting the specifications
listed under IMPLEMENT LIMITATION TABLES on
page 27, or implements approved by KUBOTA.
Use proper weights on the front or rear of the
tractor to reduce the risk of upsets. When using the
front loader, put an implement or ballast on the 3-
point hitch to maintain proper ballast and braking.
Follow the safe operating procedures specified in
the implement manual or the attachment manual.
The narrower the tread, the greater the risk of a
tractor upset. For maximum stability, adjust the
wheels to the widest practical tread width for your
application.
(See WHEEL ADJUSTMENT on page 97)
(1) Rear wheels (A) Tread width
Do not modify the tractor. Unauthorized
modification may affect the function of the tractor,
which may result in personal injury.
2. Precautions for CAB and ROPS
KUBOTA recommends the use of a CAB or roll-over-
protective-structures (ROPS), and seat belt in almost
all applications. Combination of a CAB or ROPS and
seat belt will reduce the risk of serious injury or death if
the tractor should be upset.
Check for overhead clearance which may interfere
with a CAB or ROPS.
Set the parking brake and stop the engine. Remove
any obstructions which may prevent raising or
folding the ROPS. Do not allow any bystander.
Always perform functions of CAB or ROPS from a
stable position at the rear of the tractor. Hold the
top of the ROPS securely when raising or folding it.
Make sure that all pins are installed and locked.
If the CAB or ROPS is loosened or removed for any
reason, make sure that all parts are reinstalled
correctly before operating the tractor.
Never modify or repair any structural member of a
CAB or ROPS because welding, bending, drilling,
grinding, or cutting it may weaken the structure.

SAFE OPERATION

MX5400,MX6000
7

View the manual for the Kubota MX5400 here, for free. This manual comes under the category tractors and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Kubota MX5400 or do you need help? Ask your question here

Need help?

Do you have a question about the Kubota and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 7
B
Brenda Ellison May 4, 2023

Tractor just quit. Below see lights that came on. What’s the problem and what does the lights mean?

Tractor just quit. Below see lights that came on. What’s the problem and what does the lights mean?
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

The problem and the meaning of the lights in case the Kubota MX5400 tractor suddenly stops are as follows: 1. Headlight Switch: Turn the headlight switch clockwise to activate the following lights: - (A) Off: Headlights are turned off. - (B) On (low): Headlights are dimmed as low beam. - (C) On (high): Headlights are turned on as high beam. 2. Hazard Light Switch and Turn Signal Light Switch: - (1) Headlight - (2) Turn signal / hazard light - (3) Rear turn signal / hazard light - (4) Tail light

This answer is automatically generated
S
steveApril 10, 2023

my regenration light and parked regenration light and engine rpm increase indicator is flashing what should i do to turn those off

S
StephJune 22, 2023

How can I check the parking break switch. My tractor will start cold but if I have to get off the tractor for any reason & it dies, it won’t start back. After it sits for awhile it would start back but now it won’t start at all. It has a new seat safety switch that was installed 2 days ago so that’s not my issue.

D
Dwain paulk March 4, 2024

Manual kill Kubota 5400 when u pull the kill know are you cutting off the fuel or the air

R
Richard willhite August 14, 2023

How to open hood

F
FrankJanuary 2, 2024

How do I adjust the clutch

Z
Zoe BoekbinderMay 9, 2023

Pto light flashing when pto is off

The Kubota MX5400 is a tractor that belongs to the MX series offered by Kubota, a Japanese machinery manufacturer. This tractor has a four-cylinder diesel engine with a rated output of 54 horsepower. It is equipped with an HST (hydrostatic transmission) that provides smooth and responsive operation. The tractor's rear three-point hitch has a lifting capacity of 2425 pounds, which enables it to handle a wide range of equipment. The Kubota MX5400 also has a hydraulic gear pump that delivers a maximum flow rate of 12.9 gallons per minute, allowing it to power hydraulic motors and cylinders quickly and efficiently. The tractor comes with a spacious operator's station that is designed for comfort and visibility. It has a deluxe suspension seat with armrests and adjustable lumbar support to help reduce operator fatigue during long work hours. The tractor's hood design provides excellent visibility of the surrounding area, while the instrument panel displays all the necessary information about the tractor's operation. The Kubota MX5400 is a versatile and reliable tractor that is suitable for a wide range of applications. It can be used for farming, landscaping, construction, and property maintenance tasks. It is equipped with features that enhance productivity and efficiency while providing operator comfort and convenience. Overall, the Kubota MX5400 is a quality tractor that lives up to the brand's reputation for excellence.

General
BrandKubota
ModelMX5400
Producttractor
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota MX5400 below.

Why is my Kubota MX5400 tractor not starting?

Check the battery connections to ensure they are tight and free of corrosion. Inspect the fuel level and make sure you are using the proper fuel. Additionally, verify that the safety switches are engaged, such as ensuring the seat switch is activated.

How can I adjust the cutting height of the mower deck on my Kubota MX5400?

Locate the cutting height adjustment lever on the mower deck and move it to the desired position. Lower settings result in a shorter cut, while higher settings allow for a longer cut. Remember to adjust the lever evenly on both sides to maintain a level cut.

What should I do if my Kubota MX5400 tractor is overheating?

Ensure that the radiator and cooling fan are free from debris or obstructions. Check the coolant level and ensure it is within the recommended range. If necessary, you may need to clean or replace the radiator or have the cooling system inspected by a professional.

How do I engage the four-wheel drive (4WD) on my Kubota MX5400?

Locate the 4WD selector lever, usually located near the gear shift or on the control panel. Push or pull the lever, depending on the specific model, to engage or disengage the 4WD. Refer to the tractor's indicator lights or display to confirm that the 4WD is activated.

What could be causing my Kubota MX5400 tractor to have weak hydraulic power?

Check the hydraulic fluid level and ensure it is within the recommended range. Inspect the hydraulic filters for clogging or damage, as they may need replacement. Verify that the hydraulic system is not being overloaded or operating under excessive temperature conditions.

Is the manual of the Kubota MX5400 available in English?

Yes, the manual of the Kubota MX5400 is available in English .

Is your question not listed? Ask your question here

No results