View the manual for the Kubota BX1880 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Kubota BX1880 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kubota BX1880 below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
To start your Kubota BX1880 lawnmower, ensure that you are seated in the operator's seat and fully engage the parking brake. Then, insert the ignition key, turn it clockwise to the "ON" position, and finally rotate it further to the right to the "START" position. This will initiate the engine and allow you to begin mowing.
If you notice a decrease in cutting performance, it may be due to a dull or damaged cutting blade. Inspect the blade for any signs of wear or damage and replace it if necessary. Additionally, check the mower deck for any debris buildup that could be obstructing the cutting process and clean it as needed. Regular maintenance of the cutting blade and deck will help maintain optimal cutting performance.
It is recommended to change the engine oil in your Kubota BX1880 lawnmower after the first 50 hours of operation (or first month), and then every 200 hours (or every year) thereafter. Regular oil changes help ensure proper lubrication of the engine, prolong its lifespan, and maintain optimal performance.
To adjust the cutting height on your Kubota BX1880 lawnmower, locate the cutting height adjustment lever typically located near the operator's seat. Pull the lever up or down to select the desired cutting height, which is displayed in increments on the cutting height scale nearby. Release the lever once the desired height is selected, and it will lock into place, setting the mower at the chosen cutting height.
If your Kubota BX1880 lawnmower is not self-propelling as expected, check if the transmission pedal is fully depressed and engaged. Ensure that the parking brake lever is disengaged, allowing the mower to move freely. If the issue persists, inspect the transmission drive belt for any signs of damage, wear, or misalignment. If any issues are present, consult a qualified technician for further assistance.
Yes, the manual of the Kubota BX1880 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Kubota and is the answer not in the manual?
Question and answer
Number of questions: 0