View the manual for the Krups Nespresso Vertuo Plus XN902T here, for free. This manual comes under the category coffee makers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Krups Nespresso Vertuo Plus XN902T or do you need help? Ask your question here
| Brand | Krups |
| Model | Nespresso Vertuo Plus XN902T |
| Product | coffee maker |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Krups Nespresso Vertuo Plus XN902T below.
How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.
To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.
Espresso is a small amount of concentrated coffee.
The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.
It is recommended to store coffee in an airtight and clean container.
How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.
To troubleshoot if the Krups Nespresso Vertuo Plus XN902T coffee maker is not turning on, follow these steps: 1. Check the mains, voltage, and fuse to ensure there is power supply to the coffee maker. 2. Make sure the machine head is properly closed. If it is not closed correctly, the coffee maker may not start. 3. Verify that a fresh capsule is inserted in the correct position and that the machine head is closed securely. Press the button to start the brewing process. 4. If the machine has turned "OFF" automatically, push the button to turn it back "ON". 5. If the green light on the button is blinking continuously, it indicates that the machine is heating up and will be ready in maximum one minute. 6. If the issue persists and the machine still does not start, try filling the water tank and pushing the button again. 7. If none of the above steps resolve the issue, it is recommended to contact the Nespresso Club for further assistance. By following these troubleshooting steps, you should be able to identify and resolve the issue of the coffee maker not turning on.
The light indicator on the Krups Nespresso Vertuo Plus XN902T coffee maker blinks to provide information about the machine's status. Here are the different scenarios indicated by the blinking light: 1. Regular blinking once per second: This indicates that the machine is heating up and will be ready for use in approximately one minute. 2. Regular blinking three times: This confirms that a programming action has been successfully completed. 3. Regular blinking twice followed by a steady green light: This indicates that the water tank is empty or a capsule is missing. Refill the water tank or insert a capsule to continue. 4. Regular blinking twice followed by a steady orange light: This indicates an error in a special function. Refer to the manual for specific instructions on troubleshooting the error. 5. Regular blinking three times every two seconds: This indicates that the machine is cooling down after overheating. Allow the machine to cool down before using it again. If the light indicator on your coffee maker blinks in any other pattern or if you encounter any other issues, please consult the manual for further troubleshooting steps.
To troubleshoot a device error on the Krups Nespresso Vertuo Plus XN902T coffee maker, follow these steps: 1. Check if the light indicator on the button is steady red. This indicates a device error. 2. Turn off the machine by pressing the button and then unplug it from the power source. 3. Wait for a few minutes to allow the machine to cool down. 4. Check the water tank to ensure it is properly filled and positioned. 5. Empty and clean the capsule container to prevent any blockages. 6. Clean the metallic clamps in the machine head with caution, ensuring there are no sharp edges. 7. Plug the machine back into the power source and turn it on. 8. If the device error persists, contact the Nespresso Club for further assistance. By following these troubleshooting steps, you should be able to address and resolve a device error on the Krups Nespresso Vertuo Plus XN902T coffee maker.
To troubleshoot if the Krups Nespresso Vertuo Plus XN902T coffee maker overheats, follow these steps: 1. Check if the machine is displaying any error messages or if the light indicator on the button is blinking. 2. Turn off the coffee maker by pressing the button and unplug it from the power source. 3. Allow the machine to cool down for a few minutes. 4. Check the water tank to ensure it is properly filled and positioned. 5. Clean the capsule container to remove any blockages or debris. 6. Clean the metallic clamps in the machine head carefully, being cautious of any sharp edges. 7. Plug the coffee maker back into the power source and turn it on. 8. If the overheating issue persists, contact the Nespresso Club for further assistance. By following these troubleshooting steps, you should be able to address and resolve the issue of the coffee maker overheating.
To resolve the issue of the water tank being empty or a capsule missing on the Krups Nespresso Vertuo Plus XN902T coffee maker, follow these steps: 1. Check the water tank to ensure it is properly filled with water. If it is empty, refill it with fresh water. 2. Make sure the water tank is securely positioned on its arm. You should hear a click sound when it is properly placed. 3. Verify that a capsule is inserted in the correct position in the machine head. Ensure that the machine head is closed securely. 4. Press the button to start the brewing process. The machine will read the barcode on the capsule and prepare the coffee accordingly. 5. If the light indicator on the button blinks twice followed by a steady green light, it indicates that the water tank is empty or a capsule is missing. Refill the water tank or insert a capsule to continue. 6. If the issue persists, check for any blockages in the capsule container and clean it if necessary. 7. If none of the above steps resolve the issue, it is recommended to contact the Nespresso Club for further assistance. By following these troubleshooting steps, you should be able to resolve the issue of the water tank being empty or a capsule missing on the coffee maker.
Yes, the manual of the Krups Nespresso Vertuo Plus XN902T is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Krups and is the answer not in the manual?
Question and answer
Number of questions: 0