View the manual for the Krups Nespresso U XN250A here, for free. This manual comes under the category coffee makers and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Krups Nespresso U XN250A or do you need help? Ask your question here




| Brand | Krups |
| Model | Nespresso U XN250A | XN250 A |
| Product | coffee maker |
| EAN | 0010942214007, 0010942214014, 0011094221400, 3700342412826 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Countertop |
| Product type | Capsule coffee machine |
| Reservoir for brewed coffee | Cup |
| Capacity in cups | - cups |
| Coffee input type | Coffee capsule |
| Water tank capacity | 0.7 L |
| Coffee maker type | - |
| Maximum operating pressure | 19 bar |
| Built-in grinder | No |
| Heating system | Thermoblock |
| Hot water system | - |
| Number of spouts | 1 |
| Coffee capsule/pod system | Nespresso |
| Product color | Beige, Black |
| Housing material | - |
| Built-in display | No |
| Used capsules container capacity | 14 pc(s) |
| Removable water tank | Yes |
| Removable drip tray | Yes |
| Cord storage | Yes |
| Cup holder | Yes |
| Control type | Buttons |
| Standby function | Yes |
| Fully automatic | Coffee |
| Power | 1260 W |
| Auto power off | Yes |
| Auto power off after (max) | 30 min |
| Width | 115 mm |
| Depth | 369 mm |
| Height | 251 mm |
| Weight | 3000 g |
| Number of cartons per pallet | 60 pc(s) |
| Quantity per master (outer) case | 2 pc(s) |
| Ristretto making | Yes |
| Espresso making | Yes |
| Lungo making | - |
| Coffee making | Yes |
| Americano making | - |
| Cappuccino making | - |
| Latte making | - |
| Latte Macchiato making | - |
| Mocha making | - |
| Caffe Crema making | - |
| Hot milk making | - |
| Tea making | - |
| Hot chocolate making | - |
| Chocolate milk making | - |
| Orzo making | - |
| Multi beverage | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Krups Nespresso U XN250A below.
The Krups Nespresso U XN250A has a weight of 3000 g.
How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.
To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.
Espresso is a small amount of concentrated coffee.
The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.
It is recommended to store coffee in an airtight and clean container.
How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.
The Krups Nespresso U XN250A has a height of 251 mm.
The Krups Nespresso U XN250A has a width of 115 mm.
The Krups Nespresso U XN250A has a depth of 369 mm.
No, Krups Nespresso U XN250A does not have a built-in display. This means users will have a simpler interface without the complexity of a screen.
The water tank capacity of Krups Nespresso U XN250A is 0.7 L, which is a decent size for a single-serve coffee machine.
No, Krups Nespresso U XN250A does not have a built-in grinder. This means users will have to use pre-ground coffee capsules.
Yes, Krups Nespresso U XN250A has a removable water tank, making it easier to clean and refill.
The maximum operating pressure of Krups Nespresso U XN250A is 19 bar, which is quite high and should result in a rich and flavorful espresso.
1. Ensure the coffee maker is plugged in and the power source is working. 2. Check if there is any issue with the power outlet by plugging in another device. 3. Verify that the coffee maker is turned on by pressing the power button. 4. Inspect the power cord for any damages or loose connections. 5. Reset the coffee maker by unplugging it for a few minutes and then plugging it back in. 6. Contact customer support if the issue persists for further assistance.
1. Check the mains: plug, voltage, and fuse to ensure proper power supply. 2. Verify that the water tank is not empty and fill it with potable water if needed. 3. Descale the machine if necessary to maintain proper functionality. 4. Ensure that the slider is closed completely before starting the brewing process. 5. Empty the capsule container and make sure no capsules are stuck inside the machine. 6. If the issue persists, contact the Nespresso Club for further assistance. 7. If the machine turns off automatically, touch one of the controls or push the slider to reactivate it. 8. To stop the flow of water or coffee, gently move the slider towards the back of the machine. 9. Follow the energy-saving concept to prevent the machine from turning off after 9 minutes of non-use.
To troubleshoot if the slider does not close completely or the machine does not start brewing on the Krups Nespresso U XN250A coffee maker, follow these steps: 1. Fill the water tank with potable water. 2. Place a cup under the coffee outlet. 3. Ensure the slider is closed. 4. Open the slider completely and insert the coffee capsule. 5. Select the desired coffee size (Ristretto, Espresso, or Lungo) based on the recommended cup size for the Grand Cru chosen. 6. Turn the machine on by pushing the slider or touching the controls. 7. If the light blinks on one of the coffee buttons, wait for approximately 25 seconds for heating up. A steady light indicates the machine is ready. 8. The coffee will flow automatically when the machine is ready. These steps should help resolve the issue with the slider and brewing on your coffee maker.
Yes, the manual of the Krups Nespresso U XN250A is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Krups and is the answer not in the manual?
Question and answer
Number of questions: 1Y do my Xn 250 discharge water from the inner outlet instead of discharge normally from outer side