View the manual for the Krups KM1000 here, for free. This manual comes under the category coffee makers and has been rated by 4 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Krups KM1000 or do you need help? Ask your question here
| Brand | Krups |
| Model | KM1000 |
| Product | coffee maker |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Krups KM1000 below.
How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.
To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.
Espresso is a small amount of concentrated coffee.
The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.
It is recommended to store coffee in an airtight and clean container.
How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.
To properly add a paper or permanent filter to the brew basket of the Krups KM1000 coffee maker, follow these steps: 1. Obtain the necessary accessories: Krups original #4 paper filters (100-pack) or a #4 size gold tone filter. 2. Open the brew basket of the coffee maker. 3. Place the paper filter or the permanent filter in the brew basket, ensuring it covers the entire bottom surface. 4. If using a paper filter, make sure the edges are properly aligned with the sides of the brew basket. 5. If using a permanent filter, ensure it is clean and free from any residue or debris. 6. Close the brew basket lid securely, ensuring it is properly aligned and latched. 7. The coffee maker is now ready for brewing. Remember, adding the filter correctly is important for the taste of your brewed coffee. Refer to the brewing guide on page 10 of the manual for more detailed instructions. Please note that if you use the carafe to fill the tank with cold water, it is recommended to rinse the carafe with hot water before starting the brew cycle. This helps raise the temperature of the coffee in the carafe. Enjoy your freshly brewed coffee with the Krups KM1000 coffee maker!
If ground coffee spills out of the basket when you add it to the Krups KM1000 coffee maker, follow these steps to resolve the issue: 1. Ensure that you are using the correct amount of ground coffee. Refer to the coffee-to-water ratio in the brewing guide of the Krups KM1000 manual. 2. Check if the brew basket is overfilled with ground coffee. Remove any excess coffee from the basket, leaving a small gap between the coffee and the top of the basket. 3. Make sure the ground coffee is evenly distributed in the basket. Use a spoon or your finger to level the coffee and ensure it is spread evenly. 4. Check if the brew basket lid is properly closed and securely latched. If not, reposition the lid and ensure it is securely in place. 5. Verify that the brew basket is properly inserted into the coffee maker. Ensure it is aligned correctly and fully seated in its position. 6. Close the coffee maker lid and start the brewing process. By following these steps, you should be able to prevent ground coffee from spilling out of the basket when adding it to the Krups KM1000 coffee maker.
If the lid of the Krups KM1000 coffee maker does not close properly or securely, you can try the following steps to resolve the issue: 1. Ensure that the filter holder is properly seated and locked into the brew basket. Use the handle to seat the filter holder and then turn the handle to the locked position. 2. Check if there are any obstructions or debris preventing the lid from closing. Clean the lid and the surrounding area to remove any residue or particles. 3. Verify that the lid is aligned correctly with the coffee maker. Make sure it is positioned straight and level. 4. If the lid still does not close securely, check if there are any visible signs of damage or wear. If necessary, contact Krups customer service for further assistance or to inquire about a replacement lid. By following these steps, you should be able to address the issue of the lid not closing properly or securely on the Krups KM1000 coffee maker.
If the carafe does not sit straight and level on the heating plate of the Krups KM1000 coffee maker, there could be a few possible issues: 1. Check if the carafe is properly aligned with the heating plate. Ensure that it is placed directly on the plate without any obstructions or misalignment. 2. Verify that the carafe is clean and free from any residue or debris. Clean the carafe thoroughly to ensure a proper fit on the heating plate. 3. Inspect the heating plate for any damage or irregularities. If the plate is bent or uneven, it may cause the carafe to sit unevenly. In such cases, contact Krups customer service for further assistance or to inquire about a replacement heating plate. 4. Ensure that the carafe is the correct size and model for the Krups KM1000 coffee maker. Using a carafe that is not compatible with the machine may result in an improper fit on the heating plate. 5. If the issue persists, it is recommended to contact Krups customer service for further troubleshooting or to seek professional assistance. By following these steps, you should be able to address the issue of the carafe not sitting straight and level on the heating plate of the Krups KM1000 coffee maker.
It is recommended to rinse the carafe with hot water before starting the brew cycle if you are using it to fill the tank with cold water in the Krups KM1000 coffee maker. This step helps raise the temperature of the coffee in the carafe. To summarize the information from the manual, here are the steps: 1. Before using the coffee maker for the first time, remove all packaging and follow the steps to run a first brew cycle to rinse the system. Use a full tank of water and do not use coffee or a coffee filter. 2. Fill the water tank with cold water, taking note of the number of cups. Cups are measured as 5 oz. each, and the carafe is marked with cup measurements. 3. If you use the carafe to fill the tank with cold water, rinse the carafe with hot water before starting the brew cycle. 4. This step helps raise the temperature of the coffee in the carafe, ensuring a better brewing result. By following these steps, you can ensure that the coffee in the carafe is at an optimal temperature for a delicious cup of coffee with the Krups KM1000 coffee maker.
To properly insert the paper or permanent filter into the brew basket of the Krups KM1000 coffee maker, follow these steps: 1. Add the paper or permanent filter to the brew basket. You can use Krups original accessories such as #4 paper filters (100-pack) or a #4 size gold tone filter. 2. Add ground coffee to the basket. Measure one rounded coffee scoop per 5 oz. cup of water. This step is crucial for the taste of your brewed coffee. Refer to the brewing guide on page 10 of the manual for more details. 3. Close the lid of the coffee maker and insert the carafe into the machine. Make sure the carafe sits straight and level on the heating plate before starting the brew cycle. Note: If you use the carafe to fill the tank with cold water, rinse the carafe with hot water before starting the brew cycle. This will help raise the temperature of the coffee in the carafe. By following these steps, you will be able to properly insert the paper or permanent filter into the brew basket of the Krups KM1000 coffee maker and enjoy a delicious cup of coffee.
If the ground coffee spills out of the basket while brewing with the Krups KM1000 coffee maker, you can follow these steps to troubleshoot the issue: 1. Make sure you have properly added the paper or permanent filter to the brew basket. Ensure that the filter is securely in place and not overflowing with coffee grounds. 2. Check the amount of ground coffee you have added to the basket. Measure one rounded coffee scoop per 5 oz. cup of water. Using too much coffee can cause overflow. 3. Verify that the lid of the coffee maker is closed tightly. The lid should be securely closed to prevent any leakage during the brewing process. 4. Ensure that the carafe is inserted correctly into the machine. The carafe should be placed straight and level on the heating plate to ensure proper brewing. By following these steps, you can troubleshoot and prevent the ground coffee from spilling out of the basket while brewing with the Krups KM1000 coffee maker.
To determine the amount of ground coffee to use per cup of water when brewing with the Krups KM1000 coffee maker, follow these steps: 1. Add the paper or permanent filter to the brew basket. Krups original accessories such as #4 paper filters (100-pack) or a #4 size gold tone filter can be used. 2. Measure one rounded coffee scoop of ground coffee per 5 oz. cup of water. This ratio ensures optimal extraction and flavor. If you prefer a stronger taste, you can use slightly more ground coffee. 3. Close the lid of the coffee maker and insert the carafe into the machine. Ensure that the carafe sits straight and level on the heating plate before starting the brew cycle. Note: The carafe measures "cups" as 5 oz each, and the maximum capacity is slightly more than 50 oz of total water volume before brewing. The volume of brewed coffee will be slightly less due to the absorption of water by the ground coffee. By following these steps, you can achieve the recommended ratio of 7 grams of ground coffee per 5 oz cup of water when brewing with the Krups KM1000 coffee maker. Adjust the amount of ground coffee according to your taste preference.
If the lid of the Krups KM1000 coffee maker does not close properly, you can try the following steps to troubleshoot the issue: 1. Ensure that the filter holder is seated and locked into the brew basket. Use the handle to seat the filter holder, and then turn the handle to the locked position. 2. Check if there are any obstructions or debris preventing the lid from closing properly. Clean the brew basket and the area around the lid to remove any coffee residue or foreign objects. 3. Make sure that the lid is aligned correctly with the coffee maker. Adjust the position of the lid if necessary to ensure a proper fit. 4. If the lid still does not close properly, check if there are any issues with the filter holder or the locking mechanism. Inspect for any damage or misalignment and contact Krups customer support for further assistance. By following these steps, you can troubleshoot the issue of the lid not closing properly on the Krups KM1000 coffee maker.
To prepare the carafe before starting the brew cycle with the Krups KM1000 coffee maker, follow these steps: 1. Remove the carafe from the coffee maker and ensure it is clean. Rinse the carafe with warm water to remove any residue or dust. 2. Fill the carafe with cold water up to the desired number of cups you want to brew. The carafe has clear markings indicating the water level for different cup sizes. 3. Pour the water from the carafe into the water tank of the coffee maker. Make sure not to exceed the maximum capacity indicated on the water tank. 4. Place the carafe back onto the heating plate of the coffee maker. Ensure that the carafe is properly aligned and sits securely on the plate. Note: It is recommended to rinse the carafe with hot water before starting the brew cycle. This helps to raise the temperature of the coffee in the carafe. By following these steps, you can properly prepare the carafe before starting the brew cycle with the Krups KM1000 coffee maker.
Yes, the manual of the Krups KM1000 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Krups and is the answer not in the manual?
Question and answer
Number of questions: 0