View the manual for the Krups ET3520 here, for free. This manual comes under the category coffee makers and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Krups ET3520 or do you need help? Ask your question here
| Brand | Krups |
| Model | ET3520 |
| Product | coffee maker |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Krups ET3520 below.
How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.
To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.
Espresso is a small amount of concentrated coffee.
The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.
It is recommended to store coffee in an airtight and clean container.
How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.
To fix the issue of the clock on your Krups ET3520 coffee maker not displaying the correct time, follow these steps: 1. Ensure the appliance is properly plugged into a functioning socket and that 0:00 is displayed. 2. If there was a power failure, unplug the machine and plug it in again. Remember to reset the clock time after a power failure. 3. Check if the automatic stop function has switched the appliance to standby mode. Press a button to activate it again. 4. If there is a gap in the time display, synchronize the timer with your electrical network and set the time once a month to ensure accuracy. Performing these steps should help resolve the issue with the clock on your coffee maker.
To ensure that your Krups ET3520 coffee maker is placed on a flat and stable surface, follow these steps: 1. Choose a level area with a stable foundation for the coffee maker. 2. Avoid placing the coffee maker on uneven or inclined surfaces. 3. Check that the surface is solid and can support the weight of the coffee maker. 4. Place the coffee maker gently on the surface to prevent any wobbling. 5. Ensure there are no obstructions or loose items around the coffee maker that could cause it to become unstable.
To troubleshoot if the Krups ET3520 coffee maker does not start the brewing process when you press the button, follow these steps: 1. Ensure the appliance is properly plugged in and displaying the correct time (0:00). 2. Check if the water tank is empty and refill if needed. 3. Unplug the machine and plug it in again to reset it. 4. Reset the clock time if there was a power failure. 5. Press a button to activate the automatic stop function if the appliance is in standby mode. 6. Make sure the filter holder is inserted correctly with the recommended size of filter paper (no. 4 or no. 6). 7. Add the correct amount of ground coffee per cup using a measuring spoon. 8. Close the lid and press the button to start the brewing cycle. 9. Wait for the cycle to complete, and remove the thermal jug to keep the coffee warm. These steps should help resolve the issue with the brewing process of your coffee maker.
Yes, the manual of the Krups ET3520 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Krups and is the answer not in the manual?
Question and answer
Number of questions: 0